Tripp Lite SmartPro SMC15002URM Bedienungsanleitung

Tripp Lite Unterbrechungsfreies Stromversorgungssystem SmartPro SMC15002URM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite SmartPro SMC15002URM (56 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/56

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Important Safety Instructions 2

Mounting 4

Quick Installation 6

Optional Installation 7

Basic Operation 8

Storage and Service 16

Battery Replacement 17

Product Registration 19

Regulatory Compliance 19

Español 20

Français 39

SmartPro® SMC 2U Rackmount

Intelligent, Line-Interactive UPS Systems

120V Sine Wave Output • 1,000VA—1,500VA

SMC10002URM

(Series No. AGSM8267)

SMC15002URM

(Series No. AG-0007)

Not suitable for mobile applications.

® is a registered trademark of Tripp Lite.

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

14-08-107-93-33B2.indb 1 9/25/2014 12:29:28 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation, operation

and storage of this product. Failure to heed these warnings may affect the warranty.

UPS Location Warnings

• Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS

systems, at least two people should assist in lifting and installing them.

• Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, the ambient temperature near the UPS should be between 0° C and 40° C

(between 32° F and 104° F).

• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents

or fan openings.

• When mounting the UPS system in a tower orientation, make sure the LCD Screen panel is at the

top of the UPS, not at the bottom.

• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner

may eventually cause product damage not covered under warranty.

UPS Connection Warnings

• The UPS contains its own energy source (battery). The output terminals may be live even when the

UPS is not connected to an AC supply.

• Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way

that would eliminate the UPS’s connection to ground. Do not use adapters that eliminate the UPS’s

connection to ground.

• Do not plug the UPS into itself; this will damage the UPS and void your warranty.

• If you are connecting the UPS to a motor-powered AC generator, the generator must provide

filtered, frequency-regulated computer-grade output. Connecting the UPS to a generator will void

its Ultimate Lifetime Insurance.

Equipment Connection Warnings

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a flammable

anesthetic mixture with air, oxygen or nitrous oxide.

• Do not connect surge suppressors or extension cords to the output of the UPS. This might damage

the UPS and may affect the surge suppressor and UPS warranties.

14-08-107-93-33B2.indb 2 9/25/2014 12:29:28 PM

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe

proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.

Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before

performing battery replacement. Use tools with insulated handles. There are no user-serviceable

parts inside the UPS. Battery replacement should be performed only by authorized service personnel

using the same number and type of batteries (Sealed Lead-Acid). Tripp Lite offers a complete line

of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.

com/support/battery/index.cfm to locate the specific replacement battery for your UPS. The RBC

Type can also be found on the label affixed to the Battery Retention Plate.

• During hot-swap battery replacement, the UPS will not provide backup power in the event of a

blackout or other power interruptions.

• Do not operate the UPS without batteries.

UPS and Battery Recycling

Please recycle Tripp Lite Products. The batteries used in Tripp Lite products are sealed

Lead-Acid batteries. These batteries are highly recyclable. Please refer to your local codes

for disposal requirements.

You can call Tripp Lite for recycling info at 1-773-869-1234.

You can go the Tripp Lite Website for up-to-date information on recycling the batteries or any Tripp Lite

product. Please follow this link: http://www.tripplite.com/support/recycling-program/

Important Safety Instructions

14-08-107-93-33B2.indb 3 9/25/2014 12:29:28 PM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	SmartPro SMC15002URM
Display-Typ:	LED
Akustische Signale:	Ja
Breite:	439.4 mm
Tiefe:	341.6 mm
Gewicht:	21090 g
Produktfarbe:	Schwarz
Akkuladezeit:	4.5 h
Höhe:	87.6 mm
Stecker:	NEMA 5-15P
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Verpackungsbreite:	508 mm
Verpackungstiefe:	594.4 mm
Verpackungshöhe:	221 mm
Paketgewicht:	23950 g
Zertifizierung:	FCC Part 15 Category A (EMI)\r\nCSA\r\nNOM\r\nUL1778
Ursprungsland:	Taiwan
Kabellänge:	3 m
Gehäusematerial:	Stahl
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 50 °C
Geräuschpegel:	45 dB
RS-232 port:	1
Anzahl Produkte pro Versandkarton:	1 Stück(e)
Gewicht Versandkarton:	23950 g
Länge des Versandkartons:	594.4 mm
Breite des Versandkartons:	508 mm
Höhe des Versandkartons:	221 mm
Formfaktor:	Rackmount/Tower
Kompatible Betriebssysteme:	Windows, Mac OS X
Ausgangsleistung:	1000 W
Nachhaltigkeitszertifikate:	RoHS
Eingangsfrequenz:	- Hz
Höhe bei Betrieb:	0 - 3000 m
Kühlung:	Aktiv
Effizienz:	94 %
Anzahl der AC-Ausgänge:	8 AC-Ausgänge
USV-Topologie:	Line-Interaktiv
Eingangs-Betriebsspannung (min):	- V
Eingangs-Betriebsspannung (max):	- V
Ausgangskapazität:	1.5 kVA
Ausgangs-Betriebsspannung (min):	110 V
Ausgangs-Betriebsspannung (max):	120 V
Automatische Spannungsregulierung:	Ja
AC-Steckertypen:	NEMA 5–15R
Typische Backup-Zeit bei halber Belastung:	17.7 min
Typische Backup-Zeit bei voller Belastung:	6.5 min
Wellenform:	Sine
EMI/RFI Lautstärkefilter:	Ja
Nominale Eingang Spannung:	120 V
Nominale Ausgang Spannung:	120 V
Rack-Kapazität:	2U
Hot-Swap-Batterie:	Ja
Eingebauter Ventilator:	Ja
Anzahl der Eingangs-Phasen:	1
Kaltstart:	Ja
Notstrom Aus (EPO):	Ja
Automatischer Batterietest:	Ja
Anzahl der Phasen:	1
Anstieg der Energiemenge:	570 J