Tripp Lite SmartPro SMART1000LCDU Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Tripp Lite SmartPro SMART1000LCDU (24 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war fĂĽr 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
1
Owner’s Manual
Digital UPS System
SMART1000LCDU
Not suitable for mobile applications.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Important Safety Instructions 2
Quick Installation 3
Basic Operation 4
Storage & Service 7
Product Registration 8
Español 9
Français 17
15-06-324-9334A3.indb 1 8/6/2015 4:23:08 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the
installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed
these warnings may affect your warranty.
UPS Location Warnings
• The UPS is designed for indoor use only in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Leave adequate space around all sides of the UPS for proper ventilation.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in
this manner will seriously inhibit the unit’s internal cooling, eventually causing product
damage not covered under warranty.
UPS Connection Warnings
• Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into
itself; this will damage the UPS.
• Do not modify the UPS’s plug, and do not use an adapter that would eliminate the UPS’s
ground connection.
• Do not use extension cords to connect the UPS to an AC outlet.
• If the UPS receives power from a motor-powered AC generator, the generator must provide
clean, filtered, computer-grade output.
Equipment Connection Warnings
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
• Do not connect surge suppressors or extension cords to the output of your UPS. This might
damage the UPS and may affect the surge suppressor and UPS warranties.
Battery Warnings
• Your UPS does not require routine maintenance. Do not open your UPS for any reason. There
are no user-serviceable parts inside.
• Batteries can present a risk of electrical shock and burn from high short-circuit current.
Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or
batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the
UPS before performing battery replacement. Use tools with insulated handles. There are no
user-serviceable parts inside the UPS. Battery replacement should be performed only by
authorized service personnel using the same number and type of batteries (Sealed Lead-
Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or visit
http://www.tripplite.com/support/recycling-program for recycling information. Tripp Lite offers a
complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the
Web at http://www.tripplite.com/products/battery-finder/ to locate the specific replacement
battery for your UPS.
• Do not attempt to add external batteries to the UPS.
UPS and Battery Recycling
Please recycle Tripp Lite Products. The batteries used in Tripp Lite products are sealed
Lead-Acid batteries. These batteries are highly recyclable. Please refer to your local
codes for disposal requirements.
You can call Tripp Lite for recycling info at 1-773-869-1234.
You can go the Tripp Lite Website for up-to-date information on recycling the batteries or any
Tripp Lite product. Please follow this link: http://www.tripplite.com/support/recycling-program/
15-06-324-9334A3.indb 2 8/6/2015 4:23:08 PM
3
Quick Installation
STEP 1: Place the UPS in either a horizontal (“desktop”) or vertical (“tower”) position.
The LCD screen can be rotated so it’s readable when the UPS is in either a vertical or horizontal
position. To rotate the screen: carefully insert a small tool in the slots on the sides of the screen
to pop it out of the UPS housing; rotate the screen, and snap it back into the UPS housing.
CAUTION: To safely balance the UPS when it is placed in a vertical (“tower”) position,
make sure the LCD screen is located at the top of the front panel.
STEP 2: Plug the UPS into an outlet.
After plugging the UPS into a wall outlet, push the ON/OFF button for one second to turn the
UPS on (see Basic Operation section).
Note: The UPS will not turn on automatically in the presence of live utility power.
STEP 3: Plug your equipment into the UPS.
Select outlets (see diagram) will provide battery backup and surge protection; plug your
computer, monitor and other critical devices here.* Select outlets (see diagram) will provide
surge protection only; plug your printer and other nonessential devices here.
* Your UPS is designed to support electronic equipment only. You will overload the UPS if the total wattage
ratings for all the equipment you connect to the Battery Backup Protected/Surge Protected outlets exceeds the
UPS’s Output Capacity. To find your equipment’s wattage ratings, look on their nameplates. If the equipment is
listed in amps, multiply the number of amps by 120 to determine watts. (Example: 1 amp Ă— 120 = 120W).
If you are unsure if you have overloaded the Battery Backup Protected/Surge Protected outlets, run a self-test
(see “MUTE/TEST” Button description).
CAUTION: The UPS must be plugged into a live AC outlet and turned on for 24 hours
after initial installation to fully charge the UPS’s internal battery. Your connected
equipment will receive utility-supplied AC power (if present) immediately after the UPS is
plugged in and turned on; however, your connected equipment may not receive full
battery backup in the event of a blackout or severe brownout until the UPS’s internal
battery is fully charged.
15-06-324-9334A3.indb 3 8/6/2015 4:23:08 PM


Produktspezifikationen

Marke: Tripp Lite
Kategorie: Unterbrechungsfreies Stromversorgungssystem
Modell: SmartPro SMART1000LCDU
Display-Typ: LCD
Akustische Signale: Ja
USB Anschluss: Ja
Breite: 93 mm
Tiefe: 183.9 mm
Gewicht: 7030 g
Mitgelieferte Kabel: Phone (RJ-11), USB cable
Produktfarbe: Schwarz
Akkuladezeit: 20 h
Höhe: 300.7 mm
Stecker: NEMA 5-15P
Anzahl USB 2.0 AnschlĂĽsse: 1
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 0 - 95 %
Verpackungsbreite: 264.2 mm
Verpackungstiefe: 396.2 mm
Verpackungshöhe: 121.9 mm
Paketgewicht: 7260 g
Ursprungsland: China
Kabellänge: 1.8 m
Betriebsanleitung: Ja
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -15 - 50 °C
Luftfeuchtigkeit bei Lagerung: 0 - 95 %
Anzahl Produkte pro Versandkarton: 2 StĂĽck(e)
Gewicht Versandkarton: 15010 g
Länge des Versandkartons: 391.2 mm
Breite des Versandkartons: 266.7 mm
Höhe des Versandkartons: 281.9 mm
Formfaktor: Tower
Ausgangsleistung: 500 W
Nachhaltigkeitszertifikate: RoHS, ENERGY STAR
Eingangsfrequenz: 60 Hz
Effizienz: 98 %
Hauptkarton GTIN (EAN/UPC): 10037332189896
Anzahl der AC-Ausgänge: 8 AC-Ausgänge
Eingangs-Betriebsspannung (min): 120 V
Eingangs-Betriebsspannung (max): 120 V
Ausgangskapazität: 1 kVA
Ausgangs-Betriebsspannung (min): 115 V
Ausgangs-Betriebsspannung (max): 120 V
Automatische Spannungsregulierung: Ja
Modem (RJ-11) Port: 1
AC-Steckertypen: NEMA 5–15R
Typische Backup-Zeit bei halber Belastung: 10 min
Typische Backup-Zeit bei voller Belastung: 3 min
Wellenform: Sine
Stromstärke (maximal): 12 A
EMI/RFI Lautstärkefilter: Ja
Akustische Alarm-Modi: Fault, Low battery alarm, Battery replacement
Hot-Swap-Batterie: Ja
Kaltstart: Ja
Anstieg der Energiemenge: 1038 J

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tripp Lite SmartPro SMART1000LCDU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem Tripp Lite

Bedienungsanleitung Unterbrechungsfreies Stromversorgungssystem

Neueste Bedienungsanleitung fĂĽr -Kategorien-