Tripp Lite Internet650U1 Bedienungsanleitung

Tripp Lite Unterbrechungsfreies Stromversorgungssystem Internet650U1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite Internet650U1 (32 Seiten) in der Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/32

Standby UPS Systems

Models:

BC350, BC450, BC500, INTERNET350U, INTERNET350SER,

INTERNET550SER, INTERNET550U, INTERNET600U,

INTERNET650U1

(Series Numbers: AG-030D, AG-030E, AG-030F, AG-0311,

AG-0312, AG-87AF, AG-0305, AG-0307, AG-0394)

Important Safety Instructions 2

............

Quick Installation 4

..............................

Optional Installation 5

..........................

Basic Operation 5

................................

UPS On/Off 5

...................................

LED Indicator 6

................................

Features 7

...........................................

UPS Features 7

................................

Battery Replacement 8

.......................

Storage and Service 9

.........................

Product Registration and................... 9

Regulatory Compliance

Español........................................... 11

Français 21

..........................................

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an ISOBAR6ULTRA

surge protector—a $100 value!

www.tripplite.com/warranty

18-11-058-933864.indb 1 11/20/2018 8:28:42 AM

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the

installation, operation and storage of this product. Failure to heed these warnings

may affect the warranty.

UPS Location Warnings

• Install your UPS indoors, away from excess moisture or heat, conductive contaminants,

dust or direct sunlight.

• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and

40º C).

• Leave adequate space around all sides of the UPS for proper ventilation.

• Only set the UPS upright on a sturdy ﬂat surface.

UPS Connection Warnings

• Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into

itself; this will damage the UPS.

• Do not modify the UPS plug, and do not use an adapter that would eliminate the UPS

ground connection.

• Do not use extension cords to connect the UPS to an AC outlet.

• If the UPS receives power from a motor-powered AC generator, the generator must provide

clean, ﬁltered, computer-grade output.

• The mains socket outlet that supplies the UPS should be easily accessible and located near

the UPS.

Equipment Connection Warnings

Install in accordance with National Electrical Code standards ANSI/NFPA

70 and Canadian Electrical Code, Part I, C22.1.

Short-circuit backup protection and overcurrent protection is provided by

the building installation.

To reduce the risk of ﬁre, connect only to a circuit provided branch circuit

overcurrent protection in accordance with the National Electrical Code,

ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1. The plug on

the power supply cord is intended to serve as the disconnect device. Be

sure that the socket-outlet is installed near the equipment and is made

easily accessible.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended.

• Do not connect surge protectors or extension cords to the output of your UPS. This might

damage the UPS and may affect the surge protector and UPS warranties.

• Connect the UPS to an outlet that is adequately protected against excess currents, short

circuits and earth faults as part of the building installation.

Important Safety Instructions

18-11-058-933864.indb 2 11/20/2018 8:28:42 AM

Important Safety Instructions

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. There are no user-serviceable parts inside the UPS. Do not

open the UPS except to perform battery replacement. Do not open batteries. Do not

short or bridge the battery terminals with any object. Do not dispose of batteries in a ﬁre.

The batteries may explode. Released material is harmful to the skin and eyes. It may be

toxic. Unplug and turn off the UPS before performing battery replacement. Use tools with

insulated handles. Battery replacement should be performed only by authorized service

personnel using the same number and type of batteries (sealed lead-acid). The batteries

are recyclable. Refer to your local codes for disposal requirements or in the USA only

call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for

recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery

Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/products/battery-ﬁnder

to locate the speciﬁc replacement battery for your UPS.

CAUTION: A battery can present a risk of electrical shock and high short-

circuit current. Contact with any part of a grounded battery can result in

electrical shock. The following precautions should be observed when working

on batteries:

• Remove watches, rings or other metal objects.

• Use tools with insulated handles.

• Wear rubber gloves and boots.

• Do not lay tools or metal parts on top of batteries.

UPS and Battery Recycling

Please recycle Tripp Lite products. The batteries used in Tripp Lite products are

sealed lead-acid batteries. These batteries are recyclable. Please refer to local

codes for disposal requirements.

Call Tripp Lite for recycling info at 1.773.869.1234.

Go to the Tripp Lite website for up-to-date information on recycling the batteries or

any Tripp Lite product. Please follow this link:

http://www.tripplite.com/support/recycling-program/

18-11-058-933864.indb 3 11/20/2018 8:28:42 AM

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Unterbrechungsfreies Stromversorgungssystem
Modell:	Internet650U1
Akustische Signale:	Ja
USB Anschluss:	Ja
Breite:	110 mm
Tiefe:	184.9 mm
Gewicht:	1800 g
Mitgelieferte Kabel:	USB-Kabel
Produktfarbe:	Schwarz
Höhe:	104.9 mm
Stecker:	NEMA 5-15P
Anzahl USB 2.0 Anschlüsse:	2
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Verpackungsbreite:	144 mm
Verpackungstiefe:	275.8 mm
Verpackungshöhe:	180.3 mm
Paketgewicht:	2220 g
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Ursprungsland:	Vietnam
Kabellänge:	1.5 m
Betriebsanleitung:	Ja
Gehäusematerial:	Acrylnitril-Butadien-Styrol (ABS)
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-15 - 45 °C
Luftfeuchtigkeit bei Lagerung:	0 - 90 %
Anzahl Produkte pro Versandkarton:	8 Stück(e)
Gewicht Versandkarton:	18460 g
Länge des Versandkartons:	591.8 mm
Breite des Versandkartons:	286 mm
Höhe des Versandkartons:	393.7 mm
Formfaktor:	Kompakt
Ausgangsleistung:	330 W
Nachhaltigkeitszertifikate:	RoHS
Eingangsfrequenz:	50/60 Hz
Höhe bei Betrieb:	0 - 3000 m
Hauptkarton GTIN (EAN/UPC):	10037332211054
Anzahl der AC-Ausgänge:	8 AC-Ausgänge
USV-Topologie:	Standby (Offline)
Eingangs-Betriebsspannung (min):	120 V
Eingangs-Betriebsspannung (max):	120 V
Ausgangskapazität:	0.65 kVA
Ausgangs-Betriebsspannung (min):	110 V
Ausgangs-Betriebsspannung (max):	120 V
Überspannung Einschätzung:	316 J
AC-Steckertypen:	NEMA 5-15R
Typische Backup-Zeit bei halber Belastung:	4.5 min
Wellenform:	Sine
Output Frequenz:	50/60 Hz
Regulierung der Ausgangsspannung:	±5% %
Stromstärke (maximal):	6 A
EMI/RFI Lautstärkefilter:	Ja
Druckanstiegsschutz:	Ja
Akustische Alarm-Modi:	Battery replacement,Fault,Low battery alarm,Overload alarm
Anzahl der Eingangs-Phasen:	1
Kaltstart:	Ja
Überspannungsschutz-Funktionen:	Digital Subscriber Line (DSL),Network,Telephone