Gamber-Johnson 7160-1333 Bedienungsanleitung

Gamber-Johnson niet gecategoriseerd 7160-1333

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gamber-Johnson 7160-1333 (1 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.A INST-881

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Attach the power supply to the overhead guard leg with the power supply clamp.

Place the power supply againts the overhead guard leg and clamp in place with

the the diamond plates shown below. Rotate the diamond plates so the bolts are

as tight as possible to the overhead guard leg. Once the power supply is

clamped in place the excess length of the bolts can be cut off if desired. Note:

the power supply can be clamped somewhere other than the overhead guard

leg if desired. For example it could be clamped to one of the upper bars on the

overhead guard.

PS-001

Printing Spec:

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form Revision