Conair WW714ZF Bedienungsanleitung

Conair Nicht kategorisiert WW714ZF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Conair WW714ZF (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not difficult, it may be easiest to read all the instructions first to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: SET, Up and Down arrows
1. To set your user data
Gently push on the scale with your foot. "000" will appear, then "0.0" will display.
2. Setting the user number
Press the SET button. “P-01” will appear and flash. Use the Up or Down
arrow to select a user number (P-01 to P-04).
Press SET to confirm.
3. Setting the height
Next, the inch or cm symbol will light up (if switch is set to lb,
default is height in inches; if switch is set to kg, default is
height in cm). Press the Up or Down arrow to adjust the height.
Pressing and holding either the Up or the Down arrow will
advance numbers quickly. Press SET to confirm the height.
4. Setting the age
The default age, 25, will appear and flash. Press the Up or Down arrow to
adjust the age and press SET to confirm.
5. Setting the gender
The gender icon will flash. Press the Up or Down arrow to choose male or
female gender. Press SET to confirm.
6. Displaying and storing data
Once gender is set, data storage is complete. Scale will display your
stored data (user number, height, age and gender) for a few seconds.
7. The scale is ready for use.
“0.0” will show on the display. You may press the SET button to revise the user data
or set up data for different user, or you can now use the scale to take your body
analysis readings. Or, you can let the display turn off automatically after a few seconds
and use the scale later.
Body Analysis
1. Operate the scale on a secure, flat floor. Gently press the
scale with your foot until you see “000” flashing on the display.
Take your foot off the scale immediately, and wait until “0.0”
appears.
2. Press the Up or Down arrow to select your user number and recall the stored
data. Then “0.0” will appear again.
3. Step on the scale barefoot with your feet aligned on the electrodes (metal
strips) on both sides of the platform.
NOTE: You must be barefoot in order for the scale to read your body
analysis measurements.
4. Your current weight will be displayed for a few seconds.
5. Next, the display will show a running 0 to show it is entering
the body analysis mode.
6. Then the display will show your body fat.
7. Then it will show your body water percentage.
8. Next, the display will show muscle mass.
9. Then it will show your bone mass.
10. And finally, the display will show your BMI value.
11. The LCD will display your current weight, body fat, body
water, muscle mass, bone mass and BMI again, and then turn off
automatically.
NOTE: If an error occurs, or weight is over maximum capacity, the
scale will not function properly and “Err” will appear.
Scale will show “Err” if there is improper foot contact in the body
analysis mode, for instance, if you stand on the scale with socks or shoes
on. Hard or dry skin can also prevent you from making proper contact
with electrodes on the surface of the scale. Try applying a small a ount of
moisturizer to your feet before using the scale.
m
Manual App Tracking
Your scale will work with the free WW Scales by Conair® app to
give you an easy-to-use way of tracking your measurements. To
download the app, go to the Apple® App Store or Google Play
app store and type WW scales by Conair into the search box.
Once you have downloaded the app to your device, it will walk
you through the registration process. Note that if you are a WW
member and would like to have your weight data sync automatically to the WW
member app, you will need to register with the same user name and password
you are currently using for the WW member app. Once you are registered, you can
manually add data into the app tracker by tapping the “+” sign on the dashboard:
you can choose to add data every time you weigh yourself, or just add data on
certain days. You can choose to add just one measurement (for instance, weight)
for tracking, or you can add any or all of the body analysis measurements, such
as body fat, body water, bone mass, muscle mass and BMI. The app gives you an
easy, fun way to keep track of the progress you are making.
Supplier’s Declaration of Conformity
Brand: WW by CONAIR
Model No.: WW714ZF
Description: Digital Body Analysis Scale
Responsible Party: Conair LLC, 1 Cummings Point Road,
Stamford CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Date of Issue: June 18, 2021
FCC Markings:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a cir cuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by Conair LLC, the
manufacturer of this product and the party responsible for compliance, could void
the user’s authority to operate the equipment.
This scale is not a toy.
LIMITED TEN-YEAR WARRANTY (U.S. & CANADA ONLY)
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed, together with your sales receipt. California residents need only
provide proof of purchase and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a receipt, the warranty period shall be 120 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations may not
apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Please register this product at www.conair.com/registration
Spanish translation available online at www.conairscales.com
Service Center
Conair LLC
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2021 Conair LLC, Glendale, AZ 85307. Made in China.
©2021 WW International Inc. All rights reserved. WW is the registered trademark of
WW International Inc. and used under license. IB-17355
21AD079703
B O D Y A N A LY S I S
S C A L E
five body
analysis results
manually track
on free app
2.6" backlit
display
user
memory
Instructions for use.
To get the greatest benefit from your purchase,
please read this entire brochure before using your scale.
WW714ZF
Weight and Body Fat
How does it work?
While body fat can be measured in many ways, the method used with this scale
is bioelectrical impedance. This indirect method of determining body fat starts when
a safe and very low electrical current is sent through the lower half of the body.
The electrical current flows more quickly through water and muscle than it will
through bone and fat. The scale measures the speed of the current. Based on this
number, the scale estimates body fat using a multistep mathematical formula.
Is it accurate?
Measurements of body fat tend to fluctuate a lot more than simple weight
measurements, and different methods of estimating body fat yield very different results.
Just as different scales give different results, different body fat analyzers can provide very
different body fat estimates. Even with the same scale the numbers will vary because:
• W eight loss tends to produce substantial, continuous, and unpredictable changes
in body water content. Because body fat analysis is determined by water content
in the body, results can vary considerably from day to day.
• Hydration status af fects body fat results. If you’ve just worked out, there is less
water for the electrical current to flow through. This may result in a higher body
fat result. In the same way, if you measure your body fat after drinking a lot of
fluid, it may appear that body fat is lower than it really is.
• Skin temperatur e can have an influence also. Measuring body fat in warm, humid
weather when skin is moist will yield a different result than if skin is cold and dry.
• As with weight, when your goal is to change body composition, it is better to track
trends over time than to use individual daily results.
• Results may not be accurate for persons under the age of 16 or persons with
an elevated body temperature, diabetes or other health conditions.
What you need to know!
• Per cent body fat refers to the number of pounds of fat divided by your total body
weight and multiplied by 100.
• During weight loss, per cent body fat doesn’t appear to be reduced as quickly
as expected because total weight loss and total body fat are decreasing at the
same time (for a more detailed explanation, see next section).
• Weight loss in the form of body fat and lean tissue (muscle) is common and
is normal.
• To minimize the loss of lean tissue, include regular physical activity, especially
strength training, in your weight-loss plan.
Why do I lose weight, but my body fat percentage doesn’t change much?
When you lose weight, both the numerator (pounds of body fat) and denominator
(total body weight) go down, so when it’s calculated as a body fat percentage, the
number can be small. For example, a person may weigh 200 pounds and have
40% body fat (which equals 80 pounds of body fat). He/she loses 20 pounds, but
the body fat has only dropped 4% to 36%. Yet, that 4% of body fat was over 15
pounds of fat – a very significant amount! So do not be overly concerned if you do
not see the percentage change quickly as you are losing weight: monitor the abso-
lute number of body fat pounds lost. Remember, to minimize the loss of lean tissue,
include regular physical activity, especially strength training, in your weight-loss plan.
age % % %
BMI – What Is It?
BMI stands for Body Mass Index, a statistical term derived from height and weight.
It is closely linked to body fat and health outcomes. Over 50 organizations,
including the U.S. government and the World Health Organization, have adopted
BMI guidelines. BMI is inversely related to fitness, meaning that the higher your
BMI, the less likely you are to be fit. Every time your body analysis monitor reads
your weight and calculates your body fat, it also calculates your BMI. Along with
your weight and your body fat measurements, the BMI reading gives you yet one
more tool to monitor your health and fitness.
Body Water/Hydration Levels
General health standards indicate that one should consume approximately
64 oz. of water per day from food and liquids to maintain a healthy level of
hydration. Maintaining a good hydration level will help improve your overall health
and general feeling of well-being. If your hydration levels are lower than average,
you should increase your water intake accordingly.
Body water/hydration level – how is it measured?
Hydration level is measured by using Bioelectrical Impedance Analysis (BIA). The
same analysis that is used to calculate your body fat is used to calculate your
hydration level. Taking into consideration a user’s age and gender, a calculation is
made that determines the percentage of water.
Please note: It is not recommended to take the hydration measurements in
certain situations, such as following exercise, after drinking a glass of water, or
immediately prior to, during or shortly after menstrual cycles. Hydration may not be
at normal levels during these times.
Bone Mass – What Is It?
Bone is a living, growing tissue. During youth, your body makes new bone
tissue faster than it breaks down older bone. In young adulthood, bone mass is
at its peak; after that, bone loss starts to outpace bone growth, and bone mass
decreases. But it’s a long and very slow process that can be slowed down through
calcium-rich diets and weight-bearing exercise.
Who should monitor bone mass?
Most people have no need to monitor bone mass, but certain groups –
post-menopausal women, men and women with certain diseases, and anyone
who takes medications that affect bone tissue – might want to watch for
decreases in bone mass. The bone mass reading is to be used as a guide only.
Watch for trends over time and contact your healthcare provider for a more
detailed explanation of the readings and with any questions or concerns.
Muscle Mass – What Is It?
Muscle mass is part of your lean body mass and gets measured as a percentage
of your total body weight. There are different types of muscles in the body, and men
and women tend to have different amounts of muscle tissue. If you are losing weight,
it is important to check if you are losing fat or muscle weight. Typically, you would
want to lose fat rather than muscle. Muscles give tone and shape to your body
and they help burn energy, even at rest. To minimize the loss of lean tissue, include
regular physical activity, especially strength training, in your weight-loss plan.
Body Analysis Table
Always keep in mind that you know your body best. The following ranges of body
fat, BMI, body water, bone mass and muscle mass are offered as guides.
low on target high
BMI <20 20-25 25+
Body Fat
20-29 <13% 13-23% 23.1%+ Male
30-39 <14 14-24 24.1+
40-49 <15 15-25 25.1+
50-59 <16 16-26 26.1+
60-69 <17 17-27 27.1+
Female 20-29 <18 18-28 28.1+
30-39 <19 19-29 29.1+
40-49 <20 20-30 30.1+
50-59 <21 21-31 31.1+
60-69 <22 22-32 32.1+
Body Water
age % % %
Male 20-69 <50% 50-65% 65%+
Female 20-69 <45 45-60 60+
Bone Mass
age % % %
Male 20-29 <7.6% 7.6-8.4% 8.5%+
30-39 <7.4 7.4-8.2 8.3+
40-49 <7.0 7-7.8 7.9+
50-59 <6.6 6.6-7.4 7.5+
60-69 <6.3 6.3-7.1 7.2+
Female 20-29 <6.2% 6.2-7% 7.1%+
30-39 <6.0 6-6.8 6.9+
40-49 <5.6 5.6-6.4 6.5+
50-59 <5.2 5.2-6 6.1+
60-69 <4.9 4.9-5.7 5.8+
Muscle Mass
age Lower than normal Normal Higher than normal
10-14 35.1 - 46.7% 46.8 - 58.3% 58.4 - 70% Male
15-19 34.1 - 45.7% 45.8 - 57.3% 57.4 - 70%
20-29 33.1 - 44% 44.1 - 55% 55.1 - 66%
30-39 32.1 - 42.3% 42.4 - 52.7% 52.8 - 66%
40-49 31.1 - 40.3% 40.4 - 49.7% 49.8 - 59%
50-59 30.1 - 38.7% 38.8 - 47.3% 47.4 - 56%
60-69 29.1 - 37.7% 37.8 - 46.3% 46.4 - 55%
10-14 28.1 - 32% 32.1 - 40% 40.1 - 52% Female
15-19 27.1 - 26.7% 26.8 - 33.3% 33.4 - 47%
20-29 26.1 - 31.7% 31.8 - 37.3% 37.4 - 43%
30-39 25.1 - 30% 30.1 - 35% 35.1 - 40%
40-49 23.1 - 28% 28.1 - 33% 33.1 - 38%
50-59 22.1 - 26.7% 26.8 - 31.3% 31.4 - 36%
60-69 21.1 - 25.7% 25.8 - 30.3% 30.4 - 35%
Make the most of it!
To summarize, make the most of the body analysis feature by:
• Tracking change over time and not day to day.
• Using the same scale as much as possible.
• Being extra-consistent in the time of day, day of the week, time before or after
food and fluid consumption time before or after exercise, etc., when measuring
body composition.
Come to a meeting and learn from us the best way to lose and maintain
weight. Call 1-800-651-6000 or go to WW.com to find a meeting near you.
Important Information Concerning Weight Management
When You’re Losing Weight
Your scale is the best tool for monitoring weight. While not the only measure
of weight loss, scales are the most popular method used to gauge weight-loss
success. A scale measures the sum of your total body weight, which includes
bone, muscle, fat, and water.
Body weight fluctuates during the day and from day to day,
depending on a variety of factors.
• Salt and carbohydrate intake can affect the body’s water retention.
• A large meal adds weight and can cause water retention.
• Dehydration from exercise, illness, or low fluid intake can result in weight loss.
• Muscle is also a factor. Heavy-duty resistance training can build muscle,
which can affect weight.
• The menstrual cycle can cause temporary weight gains and losses.
It’s important not to put too much stock in the exact number on the scale
because it can and will vary. This is especially true when you’re dieting. Small
weight gains and losses are common as your body adjusts to fewer calories and
more exercise. Your scale is a valuable tool when used to track weight over a
period of weeks and months. Be aware that different scales often give different
results. The scale at your doctor’s office may show one weight, and your scale at
home another. So don’t get too caught up with a single number.
Don’t Overdo It!
A surefire way to get overly concerned with your weight is to weigh yourself too
often. We generally recommend weighing yourself no more than once a week
when you’re dieting. Though it’s hard to stick to this pattern, it’s the best way to
prevent unnecessary concern with normal weight fluctuations that are unrelated
to your weight-loss efforts. Regardless of your weighing habits, it’s important that
you’re consistent.
Here are 5 rules for effectively monitoring your weight. Weigh yourself:
• Once a week, on the same • In the same place
day of the week • Wearing the same clothes
• At the same time of day • Using the same scale
To keep track of your weight, record only one number for the week.
This will give you a clear picture of any trend your weight is following.
When You’re Maintaining Weight
Fluctuations in day-to-day weight tend to be smaller when weight is stable,
so a more frequent weigh-in pattern is helpful. To maintain a stable weight:
• Weigh yourself more often than once a week.
• Use the “5-pound rule” – research shows that people who keep weight
within a 5-pound range are more likely to maintain a healthy body weight
over the long term.
Facts You Should Know
Your WW scale is a precise measuring instrument that is most accurate when
weighing a stationary object. To ensure accurate readings, always try to stand on
the same area of the scale platform and . Should the weight on the DO NOT MOVE
scale exceed the scale’s capacity, you may see the error message “Err.”
Electronic sensors are sensitive. Be careful not to drop or jar the scale.
Place it gently onto the floor surface, and store where it will be protected from
impact. The scale is an electronic instrument and should never be submerged in
water. Clean with damp cloth and/or glass cleaner.
Battery Replacement
In the event that the scale batteries need to be replaced (display will show “Lo”),
remove the screw from the battery cover on the bottom of the scale and remove
the cover. Replace the old batteries with 3 new AAA alkaline batteries. Clean the
battery contacts and also those of the device prior to battery installation. Ensure
the batteries are installed correctly with regard to polarity, then replace the battery
cover and tighten the screw again. Remove used batteries promptly. Dispose of
the old batteries properly. Do not attempt to open the scale or to remove
any components. Servicing should be done by qualified technicians only.
See warranty information.
Before Using Scale
Precautions for Use
CAUTION! Use of this device by persons with any type of electrical implant,
such as a heart pacemaker, or by pregnant women is not recommended.
Please consult your physician should you have any questions about the use
of this product in relation to any condition you may have or treatment you
may be receiving.
1. Remove all packing materials.
2. Remove the isolator tab from the battery compartment – without opening the
battery cover at the bottom of the scale, gently pull out the isolator tab. If the tab
cannot be pulled out, if it does not completely pull out or if the display does not
light up, even when you step on the scale, remove the screw from the battery
cover, remove the cover and gently pull out the isolator tab. Ensure the batteries are
installed correctly and then replace the battery cover and tighten the screw.
3. For best accuracy, place scale on tile or hardwood floor, rather than uneven,
flexible or soft flooring (such as carpet).
4. The scale is set to measure in pounds (lb). To switch to reading in kilograms (kg),
gently push on the scale with your foot. When “0.0” appears, turn the scale over
and press the switch on the back of the scale to display weight in kg or lb.
Using the Weight Only Mode
Instructions for customizing your WW Body Analysis Scale follow in next section.
However, the scale does not need to be programmed as a body analysis monitor
and can operate as a simple weight scale. To use in weigh mode only:
1. Operate the scale on a secure, even floor.
2. Step on the scale and stand still. You will see “000” flashing
for a few seconds and then your weight reading will appear.
3. The weight reading stays lit for several seconds. Then the
scale will shut off automatically.

Produktspezifikationen

Marke: Conair
Kategorie: Nicht kategorisiert
Modell: WW714ZF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Conair WW714ZF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Conair

Conair

Conair MiniPRO CS80N Bedienungsanleitung

1 Oktober 2024
Conair

Conair MASK2 Bedienungsanleitung

1 Oktober 2024
Conair

Conair skn SFB11GK Bedienungsanleitung

1 Oktober 2024
Conair

Conair InfinitiPRO 998 Bedienungsanleitung

6 September 2024
Conair

Conair Man GMTL6000 Bedienungsanleitung

6 September 2024
Conair

Conair LNT1 Bedienungsanleitung

6 September 2024
Conair

Conair Man GMT189R Bedienungsanleitung

6 September 2024
Conair

Conair WW346Z Bedienungsanleitung

22 August 2024
Conair

Conair WW510Z Bedienungsanleitung

22 August 2024
Conair

Conair WW39Z Bedienungsanleitung

22 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024