Satel APMD-250 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Satel APMD-250 (10 Seiten) in der Kategorie Bewegungsmelder. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
APMD-250
Wireless dual technology motion detector
Firmware version 1.01 apmd- / 250_en 03 21
SATEL sp. z o.o. ul. Budowlanych 66 - POLAND 80 298 Gdańsk •
tel. +48 58 320 94 00
www.satel.eu
IMPORTANT
The device should be installed by qualied personnel.
Prior to installation, please read carefully this manual.
Changes, modications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
The rating plate of the device is located on the enclosure base.
SATEL aims to continually improve the quality of its products, which may result in changes in
their technical specications and software. Current information about the changes being
introduced is available on our website.
Please visit us at:
https://support.satel.eu
Hereby, SATEL sp. z o.o. declares that the radio equipment type APMD-250 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: www.satel.eu/ce
In the EU, th radio equipment is only permitted to operate in the 868 MHz frequency is
band.
The following symbols may be used in this manual:
- note,
- caution.
The APMD- detector detects moveme in a protected area. It is designed for operation 250 nt
within the ABAX 2 / ABAX two-way wireless system. This manual applies to the detector with
rmware version 1.01, which is supported by:
ABAX 2:
ACU-220 / ACU-280 controller,
ARU-200 repeater.
ABAX:
ACU-120 / ACU-270 controller (rmware version 5.04 or newer),
ARU-100 repeater (rmware version 2.02 or newer),
INTEGRA 128-WRL control panel (rmware version 1.19 or newer and firmware
version of processor used to operate ABAX system 3.10 or newer).
1 Features
Motion detection with two sensors: passive infrared sensor (PIR) and microwave sensor
(MW).
Adjustable detection sensitivity of both sensors.
Digital motion detection algorithm for both sensors.
Digital temperature compensation.
Capability of separate sensor testing.
Option to enable / disable the creep zone protection.
Ability to replace the lens with a curtain or long-range one.
Encrypted two-way radio communication in the 868 MHz / MHz frequency band (AES 915
standard for the ABAX 2 system).
Transmission channel diversity 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 868 MHz / MHz 915
frequency band (ABAX 2 system only).
Remote update of detector rmware (ABAX 2 system only).
Remote conguration.
Built-in temperature sensor (temperature measurement range from - 10°C to +55°C).
LED indicators.
Supervision of motion detection system.
2 system only). “ECO” option for longer battery life (ABAX
Battery status control.
Tamper protection against enclosure opening and removal from mounting surface.
Adjustable mounting bracket included.
2 Specifications
Operating frequency band ............................... 868.0 MHz 868.6 MHz / 915 MHz 928 MHz ÷ –
Radio communication range (in open area)
ABAX 2
ACU- 220 .............................................................................................. up to 2000 m
ACU- 280 .............................................................................................. up to 1600 m
ABAX .............................................................................................................. up to 500 m


Produktspezifikationen

Marke: Satel
Kategorie: Bewegungsmelder
Modell: APMD-250

Brauchst du Hilfe?

Wenn Sie Hilfe mit Satel APMD-250 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewegungsmelder Satel

Bedienungsanleitung Bewegungsmelder

Neueste Bedienungsanleitung für -Kategorien-