Revel Performa3 B110 Bedienungsanleitung
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Revel Performa3 B110 (11 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĆ¼r 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/11
B112/B110 Subwoofer
Quick Start Guide
2B112/B110 Subwoofer
Quick Start Guide
ABOUT THIS DOCUMENT
This quick-start guide contains all the information you will need to
unpack and initially place your Revel Performa3 subwoofer, connect it to
the rest of your audio system, turn it on and have a ļ¬rst listen. To take
full advantage of all the performance your new subwoofer is capable of
delivering, please go to the Revel Web site (www.revelspeakers.com)
and download the free and the Revel Performa3 Subwoofer User Guide
Revel LFO (Low-Frequency Optimization) software. The User Guide and
software provide you with an extremely sophisticated way to optimize
your subwooferās performance for your particular installation.
ABOUT REVEL PERFORMA3 SUBWOOFERS
Thank you for purchasing a Revel Performa3 subwoofer. The B112
and B110 are powered by a 1,000-watt RMS (2,000-watt peak)
internal ampliļ¬er and feature a custom-designed transducer that
combines a new level of low frequency nuance and reļ¬nement with
unprecedented brute-force capabilities in a unit designed for use in the
home. Combined with the internal ampliļ¬erās large power capability,
and the extensive programming and room equalization capability of
the companion Revel LFO (Low-Frequency Optimization) programming
software, the result is a new standard of superb bass performance and
adaptability for home entertainment systems.
The B112 and B110 feature 12-inch and 10-inch versions, respectively, of
a brand-new low-frequency transducer that has been designed speciļ¬cally
for use in these two subwoofer models. The primary design goal for this
new driver was to produce very low frequencies at extremely high SPL
(sound-pressure levels) while at the same time maintaining extremely low
distortion ā requirements that usually remain mutually exclusive. This new
unit maintains a precise engineering balance between the voice coil, spider
and surround that produces linear motion of all three for lower distortion by
incorporating CAD/FEA optimized high-linearity motor geometry:
sī The extremely long (50mm) two-layer copper voice coil gives this
transducer a very high Xmax, dramatically increasing output.
A ļ¬berglass voice coil former helps the voice coil withstand
high temperatures, reducing power compression and helping
increase output. A spacer added at the top of the voice coil former
maintains motor geometry, creates a solid attachment joint and
prevents deformation of the voice coil at high outputs. The spacer
also eliminates the typical single fulcrum point between the spider
and cone on the voice coil former, minimizing voice coil rocking
modes during hi-power operation.
sī A high-temperature NomexĀ® spider features a progressive roll
design that evenly distributes mechanical stress, helping keep the
coneās motion linear during high-excursion operation.
sī A nitril/butylene rubber surround uses patented Plus OneĀ®
technology that increases the transducerās radiating area (Sd),
increasing volume displacement and output.
The coated cellulose/pulp cone and dustcap assembly is vented under
the dustcap to aid in the exchange of air, which reduces acoustic losses
and increases output.
The transducerās massive magnet assembly (30.6 lb in the B112; 24.3
lb in the B110) features a triple-stacked vented ceramic 5 magnet with
ļ¬ared vents that reduce turbulence, which improves airļ¬ow, increases
output and reduces distortion. Dual symmetrical magnet shorting rings
and an extended top pole create a symmetrical magnetic gap ļ¬eld that
increases power handling and reduces power compression further
increasing output. A 15mm-thick top plate improves heat and ļ¬ux
distribution for lower distortion.
The cast aluminum frame is fully vented to minimize acoustic losses
caused by excessive back pressure. This frame also maintains
dimensional stability and precise mechanical tolerances, allowing the
transducer to be manufactured and assembled to a high degree of
precision.
The B112 and B110 enclosures are formed with contiguous wood layers
that prevent splitting. They feature strategically-oriented bracing that
eliminates the possibility of enclosure-induced coloration. The beautiful,
modern enclosure is ļ¬nished in high-gloss piano black or genuine
American walnut in a process (developed and overseen by Italian luxury
cabinet makers) that exceeds automotive ļ¬nish quality.
Your Revel Performa3 subwoofer is designed to be used along with our
Revel LFO programming software, which is available as a free download
at www.revelspeakers.com. The software conļ¬gures the DSP processor
inside your Performa3 subwoofer, which provides up to ten independent
equalization points, each with user-determined frequency, amount of
gain/cut and ļ¬lter Q (bandwidth). This provides you with an extremely
sophisticated way to optimize the subwooferās performance for your
particular installation, listening room and seating arrangement. In
addition, the software also provides programming for the subwooferās
internal crossover system, as well as speaker delay and polarity
settings. All of these processing options can also be independently
applied to the subwooferās left and right high-pass outputs.
During development, every Revel loudspeaker model is compared to
competitive models in our unique position-independent double-blind
listening lab. This process utilizes the latest psychoacoustic research
to assure that these listening tests are valid, enabling us to verify that
all Revel loudspeakers are superior to their competitors before they are
allowed to go into production.
TABLE OF CONTENTS
About Revel Performa3 Subwoofers........................................................................................................................................ 2
B112/B110 Overview ............................................................................................................................................................... 3
Subwoofer Placement Considerations..................................................................................................................................... 4
Placing Four Subwoofers, Placing Two Subwoofers, Placing a Single Subwoofer
Making Connections ................................................................................................................................................................ 6
Connecting to a Surround Processor with an Internal Crossover, Connecting to a Stereo Preampliļ¬er,
Connecting Multiple Subwoofers, Trigger and Power Connections
Caring for Your Subwoofer..................................................................................................................................................... 10
Speciļ¬cations ......................................................................................................................................................................... 10
Warranty ................................................................................................................................................................................ 11
3
B112/B110 Subwoofer
Quick Start Guide
B112/B110 OVERVIEW
(Note: B112 and B110 rear panels are identical.)
Subwoofer Out connectors: If you are using more than one Performa3
subwoofer in the system, connect the Subwoofer Out connector to
the additional Performa3 subwooferās Input Connector. Balanced (XLR)
and unbalanced (RCA) connectors are available. Both outputs are 0dBv
(nominal)/+20dBv (maximum). The XLR output is pin 2 high.
High-Pass Out connectors: Use these connectors to send a high-pass
ļ¬ltered signal to the main (left/right) ampliļ¬erās inputs. Balanced (XLR)
and unbalanced (RCA) connectors are available. Both outputs are 0dBv
(nominal)/+20dBv (maximum). The XLR output is pin 2 high. NOTE: The
factory-default high-pass crossover setting is at 80Hz with a 24dB/octave
(4th-order) slope. You can change these settings using the Revel LFO
programming software. See the Revel Performa3 Subwoofer User Guide
for more information.
Input connectors: Connect these to the outputs of a stereo preamp or
connect a surround processor's subwoofer output to either the left or right
input. Balanced (XLR) and unbalanced (RCA) connectors are available. Both
inputs are 0dBv (nominal)/+20dBv (maximum). The XLR input is pin 2 high.
12V Trigger In/Out connectors: When the subwooferās Power Mode
Switch is set to āTrigger,ā the subwoofer will automatically turn on when
5V ā 12V is present at the 12V Trigger In connection and will turn off when
the voltage at this connection is removed. Whenever the subwoofer is on,
a 12V trigger signal is available at its 12V Trigger Out connector for use
with additional Performa3 subwoofers, or another triggerable device.
USB connector: To program the subwooferās room equalization and
high-pass and low-pass crossover characteristics, connect this USB Type
B receptacle to the USB receptacle of a computer that is running the Revel
LFO programming software.
Subwoofer Gain control: Use this control to adjust the volume of the
subwoofer relative to the systemās other speakers. (The Gain control can
be disabled using the Revel LFO programming software.)
Power Mode switch: This switch determines how the subwoofer will
turn on and off:
sī When this switch is set in the āAutoā position and the Power switch
is set to āOn,ā the subwoofer will automatically turn on when it ļ¬rst
detects an audio signal at any of its inputs, and will automatically
enter the standby mode after it has received no audio signal for a
period of time (30 seconds to 120 minutes) you can set using the
Revel LFO programming software.
sī When this switch is set in the āOnā position, the subwoofer will turn
on when the Power switch is set to āOnā and will remain on until the
Power switch is set to āOff.ā
sī When this switch is set in the āTriggerā position and the Power
switch is set to āOn,ā the subwoofer will automatically turn on when
a voltage is present at the 12V Trigger In connection and will remain
on as long as the voltage is present. When the voltage at the 12V
Trigger In connection is removed the subwoofer will automatically
turn off.
Power switch: When this switch is set to āOn,ā the subwooferās on/off
status is dependent on the setting of the Power Mode switch (see above).
When the Power switch is set to āOffā the subwoofer is turned off and
cannot turn on automatically.
We suggest setting the Power switch in the āOffā position if you will not
be using the subwoofer for a long period of time, such as when youāre on
vacation.
Power Cord connector: Plug the supplied power cord into this
connector and into a working AC power outlet.unswitched
Power Switch
Power Cord Connector USB Connector
12V Trigger In/Out Connectors
Subwoofer Out Connector (Balanced)
Subwoofer Out Connector (Unbalanced)
High-Pass Out Connectors (Balanced)
High-Pass Out Connectors (Unbalanced)
Input Connectors (Unbalanced)
Input Connectors (Balanced)
Subwoofer Gain Control
Power Mode Switch
Produktspezifikationen
Marke: | Revel |
Kategorie: | Subwoofer |
Modell: | Performa3 B110 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Revel Performa3 B110 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Subwoofer Revel
29 August 2024
29 August 2024
25 August 2024
25 August 2024
25 August 2024
25 August 2024
Bedienungsanleitung Subwoofer
- Subwoofer Philips
- Subwoofer Sony
- Subwoofer Bosch
- Subwoofer Yamaha
- Subwoofer Neumann
- Subwoofer Kƶnig
- Subwoofer MarQuant
- Subwoofer Blaupunkt
- Subwoofer Kenwood
- Subwoofer Sharp
- Subwoofer Atlantic
- Subwoofer Pyle
- Subwoofer Auna
- Subwoofer Bose
- Subwoofer Bowers And Wilkins
- Subwoofer Caliber
- Subwoofer Denon
- Subwoofer Pioneer
- Subwoofer JBL
- Subwoofer JVC
- Subwoofer KEF
- Subwoofer Klipsch
- Subwoofer KrĆ¼ger And Matz
- Subwoofer Onkyo
- Subwoofer Technics
- Subwoofer Teufel
- Subwoofer Hifonics
- Subwoofer Orion
- Subwoofer TCL
- Subwoofer Sencor
- Subwoofer Fenton
- Subwoofer TOA
- Subwoofer Musway
- Subwoofer Adam
- Subwoofer Audio Pro
- Subwoofer Boston Acoustics
- Subwoofer Cabasse
- Subwoofer Canton
- Subwoofer Dali
- Subwoofer Gemini
- Subwoofer Harman Kardon
- Subwoofer Heco
- Subwoofer Magnat
- Subwoofer Mirage
- Subwoofer Power Dynamics
- Subwoofer Skytec
- Subwoofer Tangent
- Subwoofer Vonyx
- Subwoofer Peavey
- Subwoofer HK Audio
- Subwoofer Nova
- Subwoofer Alpine
- Subwoofer Renegade
- Subwoofer LTC
- Subwoofer Behringer
- Subwoofer Mackie
- Subwoofer Omnitronic
- Subwoofer ESI
- Subwoofer MB Quart
- Subwoofer Marantz
- Subwoofer Monoprice
- Subwoofer Arcam
- Subwoofer Cambridge
- Subwoofer Dynacord
- Subwoofer Ecler
- Subwoofer Monacor
- Subwoofer Rockford Fosgate
- Subwoofer Crunch
- Subwoofer Massive
- Subwoofer James
- Subwoofer Jamo
- Subwoofer AXTON
- Subwoofer Clarion
- Subwoofer Mac Audio
- Subwoofer ESX
- Subwoofer AVID
- Subwoofer Nubert
- Subwoofer Insignia
- Subwoofer Audison
- Subwoofer RCF
- Subwoofer Electro-Voice
- Subwoofer Sonos
- Subwoofer Yorkville
- Subwoofer Boss
- Subwoofer Alto
- Subwoofer Genelec
- Subwoofer Tivoli Audio
- Subwoofer Hertz
- Subwoofer Pro-Ject
- Subwoofer Kicker
- Subwoofer AV:link
- Subwoofer Polk
- Subwoofer Speed-Link
- Subwoofer Sonus Faber
- Subwoofer McIntosh
- Subwoofer Sonance
- Subwoofer Jensen
- Subwoofer ELAC
- Subwoofer Fostex
- Subwoofer JL Audio
- Subwoofer PreSonus
- Subwoofer Qtx
- Subwoofer Deaf Bonce
- Subwoofer LD Systems
- Subwoofer Bluesound
- Subwoofer DAP Audio
- Subwoofer Definitive Technology
- Subwoofer Energy
- Subwoofer Focal
- Subwoofer Fusion
- Subwoofer Ground Zero
- Subwoofer Helix
- Subwoofer Infinity
- Subwoofer Lanzar
- Subwoofer Martin
- Subwoofer Mission
- Subwoofer Monitor Audio
- Subwoofer Mordaunt Short
- Subwoofer Mtx Audio
- Subwoofer Paradigm
- Subwoofer Phoenix Gold
- Subwoofer Piega
- Subwoofer Q Acoustics
- Subwoofer Quadral
- Subwoofer REL Acoustics
- Subwoofer Soundstream
- Subwoofer Stinger
- Subwoofer Tannoy
- Subwoofer Velodyne
- Subwoofer Wharfedale
- Subwoofer AudioControl
- Subwoofer Martin Audio
- Subwoofer APart
- Subwoofer QSC
- Subwoofer RetroSound
- Subwoofer Proel
- Subwoofer Martin Logan
- Subwoofer Metra
- Subwoofer Kanto
- Subwoofer Fluance
- Subwoofer IMG Stage Line
- Subwoofer Atlas Sound
- Subwoofer FBT
- Subwoofer Eikon
- Subwoofer DB Technologies
- Subwoofer Argon
- Subwoofer Morel
- Subwoofer SVS
- Subwoofer Citronic
- Subwoofer SPL
- Subwoofer Wet Sounds
- Subwoofer Pyramid
- Subwoofer Black Hydra
- Subwoofer GoldenEar Technology
- Subwoofer Roswell
- Subwoofer Audac
- Subwoofer OSD Audio
- Subwoofer Indiana Line
- Subwoofer Match
- Subwoofer Audioengine
- Subwoofer On-Q
- Subwoofer Crestron
- Subwoofer PSSO
- Subwoofer PowerBass
- Subwoofer Dynaudio
- Subwoofer PSB
- Subwoofer KLH Audio
- Subwoofer Extron
- Subwoofer Bazooka
- Subwoofer Theater Solutions
- Subwoofer SSV Works
- Subwoofer Kali Audio
- Subwoofer MadBoy
- Subwoofer Nxg
- Subwoofer ANT
- Subwoofer KRK
- Subwoofer Cerwin-Vega
- Subwoofer Sound Ordnance
- Subwoofer Memphis Audio
- Subwoofer Andover
- Subwoofer Aquatic AV
- Subwoofer PrecisionPower
- Subwoofer Totem
- Subwoofer Poly-Planar
- Subwoofer Audiofrog
- Subwoofer Triangle
- Subwoofer Raveland
- Subwoofer Proficient
- Subwoofer Eve Audio
- Subwoofer Planet Audio
- Subwoofer Wavemaster
- Subwoofer Audiotec Fischer
- Subwoofer Origin Acoustics
- Subwoofer PMC
- Subwoofer BMB
- Subwoofer Amina
- Subwoofer Bowers Wilkins
- Subwoofer Chrysalis
- Subwoofer B&W
- Subwoofer Alphasonik
- Subwoofer Glemm
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
13 Oktober 2024
13 Oktober 2024
10 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
6 Oktober 2024
4 Oktober 2024
2 Oktober 2024
30 September 2024