Revel Concerta B1 Bedienungsanleitung

Revel Subwoofer Concerta B1

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Revel Concerta B1 (12 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war fĆ¼r 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
B1 Subwoofer
Ownerā€™s Manual
2B1 Subwoofer
Ownerā€™s Manual
IMPORTANT SAFETY PRECAUTIONS
READ FIRST!
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturerā€™s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including ampliļ¬ers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not ļ¬t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from
the apparatus.
11. Only use attachments/accessories speciļ¬ed by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table speciļ¬ed by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualiļ¬ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or
moisture, does not operate normally or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects ļ¬lled with liquids, such as vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, ļ¬re or the like.
The lightning ļ¬‚ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
ā€œdangerous voltageā€ within the productā€™s enclosure that may be of sufļ¬cient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
WARNING: To reduce the risk of ļ¬re or electric shock, do not expose this apparatus to rain or moisture.
3
B1 Subwoofer
Ownerā€™s Manual
ABOUT THE REVELĀ® CONCERTAā„¢
B1 SUBWOOFER
Thank you for purchasing the Revel Concerta B1, a high-performance
powered subwoofer that perfectly augments Revel Concerta Series
loudspeakers in stereo music or home theater entertainment systems.
The B1ā€™s adjustable controls and multiple connection options also
allow you to optimize the subwooferā€™s performance in any system and
listening room.
Featuring a 12" (305mm) woofer with 1-1/2" (38.1mm) peak-to-peak
excursion and powered by a 250-watt ampliļ¬er, the B1 subwoofer
reproduces deep, realistic bass with very low distortion, even at the
lowest frequencies and high output levels.
Combining superior form and function, the B1ā€™s proprietary woofer is
constructed with an anodized-aluminum diaphragm for great strength at
high output levels. The spider incorporates a superior-strength NomexĀ®/
cotton blend with optimized geometry for increased linearity. The motor
includes a large ceramic-magnet motor system. A 2" (50.8mm) copper
voice coil is wound on a KaptonĀ® bobbin for impressive power handling
and freedom from compression. The vented center pole facilitates
heat dissipation, allowing more efļ¬cient high-power handling and low
compression.
The B1 cabinet consists of medium-density ļ¬berboard (MDF) walls and
extensive internal bracing to reduce cabinet-induced colorations. Rubber
padded feet are attached to the bottom of the cabinet for optimal
stability, accommodating installations on any ļ¬‚oor surface.
Since 1996, the Revel brand has been at the forefront of loudspeaker
design. Backed by Harman Internationalā€™s extensive research and design
facilities, Revel Concerta Series speakers beneļ¬t from cutting-edge
development tools, such as:
ā€¢ A multichannel listening lab allows for double-blind listening tests.
ā€¢ A laser interferometer enables detailed driver and cabinet analysis.
ā€¢ Multiple large anechoic chambers provide for precise tests and
measurements.
ā€¢ Finite-element analysis allows for advanced loudspeaker modeling.
ā€¢ A stereo lithography apparatus aids in achieving tight tolerances.
Adding to the proud lineage of Revel Ultimaā„¢ and Performaā„¢ Series
loudspeakers, the Concerta B1 subwoofer further substantiates the
Revel reputation for high-quality, high-performance loudspeakers and
subwoofers.
B1 HIGHLIGHTS
ā€¢ High-output capability with low distortion
ā€¢ Proprietary 12" (305mm) anodized-aluminum diaphragm woofer
ā€¢ Built-in 250W RMS ampliļ¬er
ā€¢ Line-level RCA inputs
ā€¢ Advanced woofer motor structure
ā€¢ Large voice coil for wide dynamic range without compression
ā€¢ Phase switch
ā€¢ Low-pass frequency control
ā€¢ Parametric room equalization controls
ā€¢ Elegant cabinet design with vinyl ļ¬nishes
SUBWOOFER PLACEMENT
Below 300Hz, loudspeaker and listener locations have a profound impact
on the way sound is reproduced. All rooms have ā€œstanding waves,ā€ by
which certain frequencies are emphasized or diminished. Their complex
patterns can combine to introduce tremendous sound coloration at low
frequencies.
The Concerta B1ā€™s Equalization controls can help to compensate for
these effects, but no electronic system alone can fully compensate for
the dramatic effects of room acoustics. Every room has locations where
ā€œnullsā€ at speciļ¬c frequencies occur. These cancellations of the sound
are like ā€œblack holes,ā€ which no amount of equalization can ļ¬ll. The
best results are always achieved through careful placement of both the
loudspeakers and the listening position. Preferable placement can be
determined through the use of computer modeling programs, or by trial-
and-error measurements. For optimal results, ļ¬nd the best loudspeaker
and listener locations ļ¬rst, then use the B1 Equalization controls for
ļ¬ne-tune adjustments.
To help determine good locations for the subwoofer(s) and the
listener(s), it is recommended that you make high-resolution in-room
response measurements. Your authorized Revel dealer can make the
appropriate measurements, using suitable equipment to ensure optimal
results.
NOTE: Many sound-measurement devices are not accurate
enough to properly measure low-frequency performance in a
listening room, since room boundaries can often cause modes
(standing waves) with very narrow-band peaks and dips.
Check with your authorized Revel dealer to conļ¬rm that your
measurement equipment is suitable for accurate, high-resolution
measurements.


Produktspezifikationen

Marke: Revel
Kategorie: Subwoofer
Modell: Concerta B1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Revel Concerta B1 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer Revel

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung fĆ¼r -Kategorien-