HQ EL-PIRLA90 Bedienungsanleitung

HQ Bewegungsmelder EL-PIRLA90

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HQ EL-PIRLA90 (75 Seiten) in der Kategorie Bewegungsmelder. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/75
29-02-2012
EL-PILRLA90
MANUAL (p. 2)
Solar sensor lamp ANLEITUNG (S. 7)
Solar-Sensorleuchte
MODE D’EMPLOI (p. 12)
Lampe à détecteur et panneau solaire GEBRUIKSAANWIJZING (p. 17)
Sensorlamp met zonnepaneel
MANUALE (p. 23)
Lampada a sensore solare MANUAL DE USO (p. 28)
Lámpara de sensor solar
HASZNÁLATI ÚTMUTATÓ (o. 33.)
Szolár mozgásérzékelőmpa KÄYTTÖOHJE (s. 38)
Liiketunnistin
BRUKSANVISNING (s. 43)
Solcellsdriven utelampa med
rörelsedetektor
NÁVOD K POUŽITÍ (s. 48)
Solární senzorové osvětlení
MANUAL DE UTILIZARE (p. 53)
Lampă solară cu senzor ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 58)
Ηλιακό φωτιστικό με αισθητήρα κίνησης
BRUGERVEJLEDNING (s. 63)
Soldreven sensorlampe VEILEDNING (s. 68)
Solcellelampe
2
ENGLISH
Solar sensor lamp
Installation Guide
HIGH SENSITIVITY from motion activity coming across the detector.
Fluctuation angle adjustment
LOW SENSITIVITY from motion activity coming towards the detector.
Rotation angle adjustment
The light fixture should be installed on a flat and stable surface.
Avoid placing objects in front of the motion detector that may affect detecting performance.
Avoid installing the light near an air conditioner, a central heater, or any high voltage system.
Avoid placing the motion detector head facing toward street traffic or other movements. This will
result in a false trigger that will prompt the light to illuminate excessively and drain the battery life.
Motion detection is most sensitive to movement across the device and less sensitive to motion
moving towards or away from it (see pictures below).
The solar charger board should be set in a sunny area where the maximum amount of sunlight can
be collected. Typically, the solar board should face in a direction (south) where sunlight can charge
the board for at least 3 hours per day (5 hours per day if behind glass). It is recommended that you
charge the light for 24 hours before its first use.
Use a soft wet cloth to periodically (at least once a year) clean the charger board to avoid the
reduction of power output due to accumulated dust.
Sensor Information
Quick Setup Procedure
Warning! 1. Please keep the product away from children.
2. This product can installed for outdoor use, but we recommend
against that for rain/storm & high lights.
15m
Correct angle
180°
Detection angle
3
Note: Please bring the following tools
Pencil Electric drill Hammer Screwdriver
1. Mark the wall where you wish to mount the light.
2. Drill all four holes.
Place the mount on the wall with nylon anchors (if needed) and screws.
3. Please connect the battery according to the diagram in the warning part of the instruction book,
and assemble the battery cover as it was.
4. Slide the light into the mount, then screw in the bottom bolt.
5. Mount the solar board with screws. Adjust the direction it faces.


Produktspezifikationen

Marke: HQ
Kategorie: Bewegungsmelder
Modell: EL-PIRLA90

Brauchst du Hilfe?

Wenn Sie Hilfe mit HQ EL-PIRLA90 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewegungsmelder HQ

Bedienungsanleitung Bewegungsmelder

Neueste Bedienungsanleitung für -Kategorien-