HQ EL-PIRLA30 Bedienungsanleitung

HQ Bewegungsmelder EL-PIRLA30

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HQ EL-PIRLA30 (45 Seiten) in der Kategorie Bewegungsmelder. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/45
27-03-2012
EL-PIRLA30
MANUAL (p. 2)
Outdoor lamp with motion sensors
ANLEITUNG (S. 5)
Außenlampe mit Bewegungsmelder
MODE D’EMPLOI (p. 8)
Lampe d'extérieur avec détecteur de
mouvement
GEBRUIKSAANWIJZING (p. 11)
Buitenlamp met bewegingsensors
MANUALE (p. 14)
Lampada da esterno con sensore di
movimento
MANUAL DE USO (p. 17)
Lámpara de exterior con detectores de
movimiento
HASZNÁLATI ÚTMUTATÓ (o. 20.)
Kültéri lámpa mozgásérzékelvel
KÄYTTÖOHJE (s. 23)
Ulkovalaisin liikkeentunnistimella
BRUKSANVISNING (s. 26)
Utomhuslampa med rörelsedetektor.
NÁVOD K POUŽITÍ (s. 29)
Venkovní osvtlení s pohybovými
senzor
y
MANUAL DE UTILIZARE (p. 32)
Lamp de exterior cu senzori de micare
 XPH H (. 35)
   
 
BRUGERVEJLEDNING (s. 38)
Udendørs projektør med
bevæ
g
elsessensorer
VEILEDNING (s. 41)
Utendørs lampe med bevegelsessensorer
2
ENGLISH
Outdoor lamp with motion sensors
Summary
The product is an energy-saving automatic lamp with integrated circuit and precise detection
components. It switches on if motion is detected and automatically off after no motion is detected for a
certain period of time. Its performance is stable. It can identify day and night.
Specifications
Power source: 100-130VAC
220-240VAC
Power frequency: 50/60Hz
Rated load: 150W max.
Time setting: Min. 5sec
Max. 7min±2min (adjustable)
Light control: <10LUX~2000LUX (adjustable)
Detection range: 12m (22°C) (adjustable)
Detection angle: 180° ~ 120°
Installation height: 2m ~ 4.5m
Operating humidity: <93%RH
Operating temperature: -10°C ~ +40°C
Weight: approx. 0.573kg Beam angle: (50%): 101.4°
IP44
Sensor Information
12m
Correct movement orientation
180°/120°
Detection angle
Luminous intensity: cd
3
Function
Auto identification of day and night, the light-control can be adjusted, so it works at night
automatically and stops in daytime.
Time setting can be adjusted.
Installation
N - Neutral
L - Live
- Earth
A
(1) Please shut off the power before installation.
(See following diagram)
(2) Loosen the screw on the rear lid of the junction box.
(3) Connect the power to the sensor lamp according to connection diagram.
(4) Install the sensor lamp in the selected location according to installation diagram.
(5) Replace the rear lid and tighten the screw. Test the lamp.
Test
1) Sensitivity: Adjust knob “1” clockwise to raise its sensitivity and counter-clockwise to reduce its
sensitivity.
2) Adjust knob “2” clockwise to lengthen operating time and counter-clockwise to shorten it.
3) Light control: Adjust knob “3” to select different illumination levels. (See Fig.)
4) Switch on the power, the lamp will turn on within 5s and turn off within 5-30s: after it turning off and
detecting motion the lamp will turn on again. Without detecting any motion it will turn off after
5~10s.
5) Turn the light control to night, cover the detection window (simulating night), and move in front of
the lamp. It turns on and will switch off after 5~10s if no movement is detected.
ATTENTION: When using this product, please adjust the sensitivity to an appropriate level;
please do not adjust the sensitivity to maximum, to prevent the product from working normal.
Too high sensitivity may detect the wrong kind of motion, such as the wind blowing leaves or
curtains, small animals.
If the product does not work normal, please try to reduce the sensitivity and test again.
Note
Do not install in direct sunlight or air stream and quick temperature changes. Do not touch or impact
the lens and do not clean with aggressive agents.


Produktspezifikationen

Marke: HQ
Kategorie: Bewegungsmelder
Modell: EL-PIRLA30

Brauchst du Hilfe?

Wenn Sie Hilfe mit HQ EL-PIRLA30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewegungsmelder HQ

Bedienungsanleitung Bewegungsmelder

Neueste Bedienungsanleitung für -Kategorien-