Hitec LINX_3D Bedienungsanleitung
Hitec
Funksteuerung
LINX_3D
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hitec LINX_3D (16 Seiten) in der Kategorie Funksteuerung. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
Congratulations on your purchase of the Lynx 3D computer controlled pistol grip system.
Take time to familiarize yourself with these instructions for quick and easy setups and fine
tuning adjustments need at your track. Now, prepare to take a step into a new dimension of
control with the Lynx 3D from Hitec!
Table of Contents
Pg. 1 Introduction / External Switches
Pg. 2 Physical Features / Reference Guide
Pg. 2 Electronic Features / DCX Receiver
Pg. 3 03MC Receiver / Changing Frequencies
Pg. 3 Battery Charging / Left Hand Operation
Pg. 5 Programming Flow Chart
Pg. 6 Edit Mode Access / EPA
Pg. 7 Model Reset / Model Copy / Model Select
Pg. 8 Timer / Idle Up
Pg. 9 Anti-lock Brakes / Aux. Ch. 3
Pg. 10 Servo Reversing / Exponential
Pg. 12 Auto and Standard Dual Rate
Pg. 13 Trims / Brake Depth / Steering Wheel Tension
Pg. 14 DSC / Driving Tips / Final Thoughts
External Switches and Their Usage
1. Power switch: Powers the system
2. Display switch: Allows programming without powering the RF signal.
3. Idle up switch: Used with gas or nitro vehicles to increase the idle speed at engine start up.
Switch position right is “ON”.
4. Dual rate switch: Selects between *auto dual rate (left) and standard dual rate (right).
5. Throttle trim: Adjusts the neutral point of the throttle and brakes.
6. Steering trim: Adjusts the neutral point for the steering.
Programming Buttons for LCD Screen
7. Edit up/down: Accesses the menu when pushed simultaneously and is used in scrolling through
the menu to select the area to program.
8. Data inc/dec: Adjusts setting when accessing the menu.
9. Aux +/-: Used for CH. 3 and changing data in selected menus.
Handle Switches
10. Dual Rate Adjust: Selects the amount of travel the steering servo will turn.
11. ATL: Used to adjust the maximum amount of braking that will be applied when the brakes are
fully engaged. Note: This is also the EPA (End Point Adjustment) for the brakes.
Physical Features
1. Removable transmitter frequency module.
2. External charging jack: Port for charging NiCads with the supplied “overnight” charger.
3. Battery door: Access to the transmitter NiCad battery box.
4. Wrist strap mount: For connecting optional wrist or neck strap, part # 58311.
5. Brake depth adjustment screw: Limit the amount of physical brake lever travel.
6. Wheel tension adjustment screw: Increases or decreases the steering wheel tension.
7. D.S.C. (Direct Servo Control): Controls the receiver directly via the DSC Cable.
8. Right/Left hand operation: Transmitter head can be adjusted for right or left hand use.
1
Electronic Features
The following features are described in depth throughout this manual
−3 Channel FM digital proportional system
−10 model memory
−Model copy
−End Point Adjustment (EPA)
−Exponential (Steering and Throttle curve)
−Digital Dual Rate (Two modes)
1. Standard
2. Auto (Dual settings per throttle position)
−ATL Brake (Adjustable Travel Limit)
−ABS Brakes (Anti-lock Braking System)
−Idle up
−Timer (Up/Down) with audible alarm
−Five position programmable 3rd channel
−Digital trims
−Audible low battery warning
−Auto Save (Warning: Auto save must engage before programming can continue or data may
be lost. This is done by allowing the EPA settings to “Auto Save” by letting the voltage
reappear on the screen before proceeding with any other adjustments, this takes
approximately 2 seconds).
2
Produktspezifikationen
| Marke: | Hitec |
| Kategorie: | Funksteuerung |
| Modell: | LINX_3D |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hitec LINX_3D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Funksteuerung Hitec
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
3 Mai 2023
Bedienungsanleitung Funksteuerung
- Funksteuerung Reely
- Funksteuerung Absima
- Funksteuerung Saturn
- Funksteuerung Futaba
- Funksteuerung Graupner
- Funksteuerung JRpropo
- Funksteuerung Multiplex
- Funksteuerung Robbe
- Funksteuerung Robbe Futaba
- Funksteuerung Rush
- Funksteuerung Sanwa
- Funksteuerung Airtronics
Neueste Bedienungsanleitung für -Kategorien-
14 Oktober 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
25 August 2024
25 August 2024
25 August 2024