Elba ETM-E3320 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Elba ETM-E3320 (1 Seiten) in der Kategorie Kraan. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
A Tap Body
B Rubber O-ring
C Sink top or Work top
D Rubber O-washer
E Metal O-washer
F Threaded fixing bushing
G Flexi bose
H Rubber O-ring for flexi hose
1. An opening hole of 35mm diameter is required on sink top or work top for installation of tap.
2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).
3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.
4. Slide the rubber O-washer (D) and metal O-washer (E) over the threaded tube and up to the underside of
sink top or work top (C).
5. Screw the fixing bushing (F) up to the metal O-washer (E).
6. Connect the flexi hoses (G) to the extension tube on one end and the hot or cold water supply on the other
end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes
through the cold flexi hose.
(C)
ETM-E3820
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure differences between hot and cold water
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETM-E3320 ETM-E2920 ETM-E3920
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Produktspezifikationen
| Marke: | Elba |
| Kategorie: | Kraan |
| Modell: | ETM-E3320 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Elba ETM-E3320 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kraan Elba
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung Kraan
- Kraan Ernesto
- Kraan Teka
- Kraan IKEA
- Kraan Inventum
- Kraan Smeg
- Kraan Lynx
- Kraan Caple
- Kraan Livarno
- Kraan Franke
- Kraan Nodor
- Kraan Miomare
- Kraan Grohe
- Kraan Delta
- Kraan Hansgrohe
- Kraan Brita
- Kraan Schütte
- Kraan Lamona
- Kraan CDA
- Kraan Quooker
- Kraan BLANCO
- Kraan Elkay
- Kraan Deante
- Kraan Neo
- Kraan Everpure
- Kraan ZLine
- Kraan Sani-Lav
- Kraan Fala
- Kraan Omnires
- Kraan CurAqua
- Kraan Gessi
- Kraan Sussex
- Kraan Fantini
- Kraan Oliveri
- Kraan Zip
- Kraan Moen
- Kraan WillieJan
- Kraan Lomazoo
- Kraan Billi
- Kraan SaniSupreme
- Kraan Viidako
- Kraan Waltec
- Kraan Graff
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
14 September 2024
13 September 2024
13 September 2024
12 September 2024