Elba ETC-E2700 Bedienungsanleitung

Elba Kraan ETC-E2700

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Elba ETC-E2700 (1 Seiten) in der Kategorie Kraan. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
1. Install the intake (A) on the wall.
2. Put the tape(C) around the screw threaded tube, cover the rosette (B) and screw into pipeline.
3. Connect water and check if the screw has been sealed tightly.
pipeline
Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure di erences between hot and cold water
supply
Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETC-E2700
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Cold Water Tap

Produktspezifikationen

Marke: Elba
Kategorie: Kraan
Modell: ETC-E2700

Brauchst du Hilfe?

Wenn Sie Hilfe mit Elba ETC-E2700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten