Techno Line WS6825 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Techno Line WS6825 (7 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
WS682 - INSTRUCTION MANUAL 5
LED WEATHER STATION WITH RADIO CONTROLLED CLOCK AND ALARM
Words in the figure:
ENGLISH
OTHER LANGUAGE
Front view
ALARM ON
TIME
RCC INDICATOR
INDOOR TEMPERATURE
OUTDOOR TMEPERATURE
WEATHER FORECAST
Back view
SNOOZE/DIMMER
UP/ RF
SET
ALARM
DOWN/WAVE
RESET
AC/DC ADAPTOR
DC SOCKET
INSERT AC/DC
ADAPTOR JACK
STAND HOLE
INSERT 1 x CR2032
BATTERY INSIDE THE
BATTERY COMPARTMENT
BATTERY DOOR
HANGER HOLE
OUTDOOR TEMPER URE SENSOR AT
LED
RESET
STAND
CHANNEL 1
CHANNEL 2
CHANNEL 3
INSERT 2 x AAA BATTERIES
ENVIRONMENTAL RECEPTION EFFECTS
The weather station obtains the accurate time with wireless technology. Same as all wireless devices,
the reception is maybe affected by the following circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings
Near freeway, railway, airports, high voltage cable etc.
Near construction site
Inside concrete buildings
Near electrical appliances (computers, , etc) TV’s
Inside moving vehicles
Near metallic structures
Place the station at a location with optimal signal, i.e. close to a window and away from metal surfaces
or electrical appliances.
QUICK SETUP
Step 1 Keep the station and outdoor sensor next to each other. Slide open the battery cover at the
back of the outdoor sensor. Make sure the channel selector is set at position 1 (top position), then
insert 2 x AAA batteries (not included) into the outdoor sensor by observing the - polarity correct “+/
signs inside the battery compartment. Replace the battery door.
Step 2 sert the AC/DC adaptor to any 230V AC household outlet. Then insert the DC jack to the In
back case of the station. Insert the stand to the bottom of the weather station.
Step 3 Slide open the battery cover at the back of the station, then insert 1 x CR2032 Lithium battery
(not included) to the batte polarity of the battery is facing up. Then ry compartment. Make sure “+”
replace the battery cover.
Step 4 Peel off the protective label on the front. The weather station is ready to work for you.
The station will receive data signal from the outdoor sensor in few seconds. Then place the outdoor
sensor in a dry and shaded area outdoor.
BACK-UP BATTERIES
When the power supply use, e station will powered the back- batteries. The LED is not in th be by up
display turned off, time alarm time remain stored (also is but and in the event a power failureof ).
DCF AL RECEPTION AND SIGNAL INDICATOR SIGN
After the station is powered up, it starts to receive DCF signal. The icon flashes.
Receiving signal ( icon flashing) DCF
Successful reception ( icon becomes static)
Failed reception ( icon disappear)
During reception, press the /
WAVE
button will display reception mode and signal strength indication:
When strong signal is detected, display shows with 3 bars . DCF
When weak or no gnal is detected, display shows . DCF si or


Produktspezifikationen

Marke: Techno Line
Kategorie: Wetterstation
Modell: WS6825

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techno Line WS6825 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation Techno Line

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-