Techno Line WS 7394 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Techno Line WS 7394 (13 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-art weather station as an
example of innovative design and quality piece of engineering. Providing
radio controlled time, date, calendar, indoor and outdoor temperature,
indoor relative humidity, and air pressure history information. This unit will
never keep you guessing on current and future weather conditions.
Operation of this product is simple and straightforward. By reading this
operating manual, the user will receive a better understanding of the
Weather Station together with the optimum benefit of all its features.
FEATURES:
The Weather Station
Hanging hole
LCD Display
Battery
compartment
Function
keys
Stand
DCF Radio controlled time with manual setting option
Time reception ON/OFF (user selectable)
12/24 hour time display
Time zone option ±12 hours
Weekday and day calendar display (year and month only in setting
mode)
Weather forecasting with weather tendency indicator
Indoor comfort indicator
Temperature display in ºC/ºF
Indoor and outdoor temperature display with MIN/MAX records and
time of reception
Indoor humidity display as RH% with MIN/MAX records
Relative air pressure hPa/ inHg with adjustable reference value
Weather icon sensitivity setting
Relative air pressure history for the past 12 hours (electronic
barometer with barometric pressure trend)
LCD contrast selectable
Can receive up to 3 outdoor transmitters
Low battery indicator
Table standing or wall mounting
16
The Outdoor Temperature Transmitter
Battery cover
Remote transmission of outdoor temperature to weather station by
433 MHz signal
LCD showing current temperature
Rain proof casing
Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The Weather Station uses 2 x AA, IEC LR6,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
17
1. Insert finger or other solid object in the
space at the bottom center of the battery
compartment and lift up to remove the
cover.
2. Insert batteries observing the correct
polarity (see marking).
3. Replace compartment cover.
TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AAA,
IEC, LR3, 1.5V batteries. To install and
replace the batteries, please follow the steps
below:
1. Unscrew the screw on the back of the
compartment and remove the cover.
2. Insert the batteries, observing the
correct polarity (see marking).
3. Replace the battery cover on the unit
and seal by re-screwing.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is because a random
security code is assigned by the transmitter at start-up and this code must
be received and stored by the Weather Station in the first 3 minutes of
power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis
to ensure optimum accuracy of these units.
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
SETTING UP
1. First, insert the batteries into the Weather station (see “How to
install and replace batteries in the Weather station above).
Once the batteries are in place, all segments of the LCD will light up
briefly. Then the indoor temperature and humidity, the time as 0:00
the date as TH.1., the weather icons (sun and clouds) will be
displayed. If the indoor temperature and humidity are not displayed
after 15 seconds, remove the batteries and wait for at least 1 minute
before reinserting them. Once the indoor data is displayed proceed
to step 2.
2. Within 3 minutes of activating the Weather station, place the
batteries into the transmitter (see “How to install and replace
batteries in the Temperature transmitterabove).
3. After inserting the batteries into the transmitter, the Weather station
will start receiving data from the transmitter. The outdoor
temperature data should then be displayed on the Weather station.
If this does not happen after 3 minutes, the batteries will need to be
removed from both units and reset from step 1.
4. The Weather station can take up to 3 remote transmitters. If you
have purchased additional transmitters, follow step 2 for all extra
transmitters. However, ensure that you leave 10 seconds in between
the reception of the last transmitter and the set-up of the following
transmitter. The Weather Station will number the transmitters in the
order of set-up, i.e. the first transmitter will have the temperature and
humidity displayed with the number 1 against it and so on.
5. After all the transmitters are set up, there is a testing period, during
which the display switches quickly between all the received
transmitters at random, according to which random transmission it
receives. The process will stop automatically if no keys are pressed
for a few minutes.
6. Once the remote data have been received and displayed on the
Weather station, the DCF-77 time code reception is automatically
started. This takes typically between 3-5 minutes in good conditions.
This time period is an excellent opportunity to locate the
transmitter(s) in suitable location(s) outdoors. In order to ensure
sufficient 433MHz transmission however, this should under good
conditions be no more than 100 meters from where the Weather
station will be finally positioned (see notes on “Positioning and
“433MHz Reception”).
7. If after 10 minutes, the DCF time has not been received, use the
SET key to manually enter a time and date initially. The clock will
automatically attempt to receive the DCF time at each full hour.
When this is successful, the received time will override the manually
set time. The date is also updated with the received time. (Please
refer also to notes on “Radio controlled Time Reception” and
“Manual Time Setting).
Note:
In the event of changing batteries of the units, ensure the batteries do not
spring free from the contacts. Always wait at least 1 minute after removing
the batteries before reinserting, otherwise start up and transmission
problems may occur.
RESETTING
The Weather Station and the Temperature transmitter need to be reset
when one of the following conditions occur:
Unsuccessful 433MHz signal reception.
Malfunction on the units.
Batteries replacement.
For resetting, remove all batteries from the units. Wait at least for 1 minute
before powering up the Weather Station again. Proceed from step 1 in
“Setting Up”.
DCF RADIO CONTROLLED TIME
18
The time base for the radio controlled time is a Cesium Atomic Clock
operated by the Physikalisch Technische Bundesanstalt Braunschweig


Produktspezifikationen

Marke: Techno Line
Kategorie: Wetterstation
Modell: WS 7394

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techno Line WS 7394 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation Techno Line

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-