Techno Line WS 9136-IT Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Techno Line WS 9136-IT (17 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
21
LCD
Display
WIRELESS 868 MHz WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with wireless 868
MHz transmission of outdoor temperature and display of indoor
temperature, weather forecast icons and weather tendency indicators. It
is further featuring a DCF-77 radio controlled clock and alarm function.
With four easy to use function keys, this innovative product is ideal for
use in the home or office.
FEATURES:
The Weather Station
Function
Keys Foldout stand
Battery
compartment
cover
Hanging hole
22
DCF-77 Radio controlled time function with manual time setting
options
DCF time reception ON/OFF
24 hour display
Alarm function with snooze
Time zone +/- 12 hours
Temperature display in degree Celsius (°C)
Indoor and outdor temperature with MIN/MAX records
Manual reset of MIN/MAX records
3 weather forecast icons with weather tendency indicator
Wireless transmission at 868 MHz
Signal reception interval at 4 seconds
Low battery indicators
Wall mounting or table standing (foldout stand)
The Outdoor Temperature Transmitter
Remote transmission of outdoor
temperature to Weather station by 868
MHz signals
Shower proof casing
Wall mounting and table-standing
SETTING UP:
Note: This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see
“). Install and replace batteries in the Temperature transmitter
23
2. Within 30 seconds, insert the batteries into Weather station (see
“I ”). Once the nstall and replace batteries in the Weather station
batteries are in place, all segments of the LCD will light up briefly.
Then the time (as 0:00) and the weather icon will be displayed. If
these are not displayed after 60 seconds, remove the batteries and
wait for at least 30 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving
data from the transmitter. The outdoor temperature and the signal
reception icon should then be displayed on the Weather station. If
this does not happen after 3 minutes, the batteries will need to be
removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission, this should
under good conditions be a distance no more than 100 meters
between the final position of the Weather Station and the
transmitter (see notes on ” and ”). Mounting 868 MHz Reception
5. Once the remote temperature has been received and displayed on
the Weather station, the DCF time (radio controlled time) code
reception is automatically started. This takes typically between 3-5
minutes in good conditions.
Note:
Daily DCF reception is done at 02:00 and 03:00 every day. If the
reception at 03:00 is not successful, then at 04:00 and 05:00 and 06:00
there are other tries, until one is successful. If the reception at 06:00 is
still not successful, then the next try takes place at 02:00 next day.
If reception is successful, the received time will override the manually set
time. (Please refer also to notes on “ DCF-77 Radio Controlled Time
and ”). Manual Time Setting


Produktspezifikationen

Marke: Techno Line
Kategorie: Wetterstation
Modell: WS 9136-IT

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techno Line WS 9136-IT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation Techno Line

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-