Techno Line WS-7018S Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Techno Line WS-7018S (25 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
WIRELESS 433 MHz WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with wireless 433MHz transmission of outdoor temperature
and humidity and display of indoor temperature and humidity. It is further featuring a DCF-77 radio controlled clock
with date display and two alarms. With eight easy to use function keys, this innovative product is ideal for use in the
home or office.
FEATURES:
The Weather Station
Detachable stand
Function Keys
Battery cover
LCD Display
Hanging Hole
DCF-77 Radio controlled time with manual setting options
Time reception ON/OFF
12/24 hour display
29
Hour and minute display, seconds indicated by flashing dot
Time zone option ±12hours
Features 2 alarms with snooze function
Snooze setting
Date and month / weekday and date calendar display selectable
Weather forecasting with 3 weather icons and weather tendency indicator
Weather forecasting icon sensitivity setting
Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable
Indoor and outdoor temperature display with MIN/MAX recording
Indoor and outdoor humidity reading displayed as RH% with MIN/MAX recordings
All MIN/MAX temperature recordings show date and time received
All MIN/MAX recordings can be reset
Indoor comfort level indicator - happy or sad face icons
Can take up to three outdoor transmitters
LCD contrast setting
Low battery indicator
Wall mounting or table standing
The Thermo-Hygro Outdoor Transmitter
Remote transmission of outdoor temperature and humidity to
weather station by 433 MHz signals
LCD showing outdoor temperature and humidity
Wall mounting case
30
SETTING UP:
1. First, insert the batteries into the Weather station (see “How to install and replace batteries in the
Weather station below). Once the batteries are in place, all segments of the LCD will light up briefly and a
short signal tone will sound. Following some test data display, the indoor temperature and humidity, the time
as 0:00 the date as 1.1. and the weather icons sun and clouds will be displayed. If the indoor temperature
and humidity are not displayed after 30 seconds, remove the batteries and wait for at least 10 seconds
before reinserting them. Once the indoor data is displayed proceed to step 2.
2. Within 3 minutes of activating the Weather station, place the batteries into the transmitter (see “How to
install and replace batteries in the Thermo-Hygro outdoor transmitter“ below).
3. After inserting the batteries into the transmitter, the Weather station will start receiving data from the
transmitter. The outdoor temperature and humidity should then be displayed on the Weather station. If this
does not happen after 15 minutes, the batteries will need to be removed from both units and reset from step
1.
4. The Weather station can take up to 3 remote transmitters. If you have purchased additional transmitters,
follow step 2 for all extra transmitters. However, ensure that you leave 10 seconds in between the reception
of the last transmitter and the set-up of the following transmitter. The Weather station will number the
transmitters in the order of set-up, i.e. the first transmitter will have the temperature displayed with the
number 1 against it and so on.
5. Before all the transmitters are set up, there is a testing period, during which the display switches quickly
between all the received transmitters at random, according to which random transmission it receives.
Pressing any key will stop this process. The process also stops automatically if up to 3 transmitters are
received or no keys are pressed for a few minutes.
6. Once the remote temperature and humidity have been received and displayed on the Weather station, the
DCF-77 time code reception is automatically started. This takes typically between 3-5 minutes in good
conditions. This time period is an excellent opportunity to locate the transmitter(s) in suitable location(s)
outdoors. In order to ensure sufficient 433 MHz transmission however, this should under good conditions be
31


Produktspezifikationen

Marke: Techno Line
Kategorie: Wetterstation
Modell: WS-7018S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Techno Line WS-7018S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation Techno Line

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-