Taylor 3896 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Taylor 3896 (9 Seiten) in der Kategorie Küchenwaage. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
3896
Digital Kitchen Scale
Balance de Cuisine Numérique
Báscula Digital de Cocina
Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor ® scale is an example of superior
design and craftsmanship. Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.
Battery Information
This scale operates on 2 3 volt CR2032 lithium batteries (installed). There is a strip under the lithium
battery cover to prevent battery drain in shipping. Please remove the strip before continuing with
these instructions (you may need to remove the battery compartment cover to avoid breaking the
strip). Also, some models have a static cling label on the lens to prevent scratching. Please remove
before use.
Replace the batteries when the Low Battery warning appears on the display, or the readings
grow dim or irregular. To replace the batteries:
1. Use two 3 volt CR2032 lithium batteries. Always replace all batteries at the same time; do not
combine old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-
cad, ni-mh, etc.) batteries. Do not dispose of batteries in fire, as batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
2. Remove screw (or screws) from the battery compartment cover on the bottom of the scale and
remove the cover. Take care when removing and replacing the battery door screw. Do not turn the
screw in the wrong direction or over tighten it as this may strip the screw threads in the plastic battery
door
3. Remove the old batteries from the compartment.
4. Place the new batteries with the “+” sign up into the battery compartment.
5. Replace the battery compartment cover and screw(s).
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle
batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries
if the scale will not be used for a long period of time.
General Weighing Operation
1. Place the scale on a hard, level surface.
2. Press the ” button to turn the scale on. The show ” and/TARE display will then zero when it is
ready for use. If the display does not show zero, press the “ /TAREbutton to reset (tare) the scale to
zero.
3. Your scale weighs in pounds/ounces (lb oz), grams (g), ounces (oz) a kilograms ( ). Press the nd kg
” button tUNIT o change the units of measurement.
4. Place the item to be weighed on the center of the platform. The weight will display. As you add
weight, the weight displayed increases.
5. The scale will turn off automatically after approximately 1 minute of non-use or if there is no
change in weight after approximately 3 minutes. Press and hold the “ ”/TARE button to turn the
scale off manually.
Tare Operation
You may wish to weigh ingredients in a bowl or other container (not included). In this case, you will
need to tare, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.
1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a
heavy container, as this might reduce the maximum capacity of the scale.
2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The
display will turn on and then show zero. The weight of the container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will display.
4. The weight of additional ingredients may be tared out as well. For example, if a recipe calls for ½ lb
rice and ½ lb beans, place the rice into the bowl. Once the correct amount of rice is weighed, press
“ ”/TARE until the display is reset to zero. Add the ½ lb of beans. Both ingredients have been
accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative number when the items are
removed from the scale. To reset the scale back to zero for a new measurement, press until /TARE
the display resets to zero.
Note: The scale can tare (zero out) weights totaling up to 11 lbs / 5000 g / 176 oz. / 5 . kg
ShouldO-Ld” appear on the display, the scale has reached maximum tare capacity.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use
detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Avoid contact with acids,
such as citrus juices. DO NOT immerse the electronic scale in water or wash in a dishwasher.
2. Do not tamper with the scale’s internal components. Doing so will invalidate the warranty on this
unit and may cause damage. Other than replacing the batteries, the scale contains no user-
serviceable parts.
3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts.
Avoid rough treatment. Treat it with care to ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended for commercial or medical
use.
5. This scale is designed to read weights up to 11 lb x 0.1 oz / 5 g x 1 g / 176 oz x 0.1 / 5 000 oz kg x
0.001 kg. To prevent damage, do not place more than 11 lb / 5 g / 176 oz / 5 on it. 000 kg
6. Do not store scale where you store cleaning chemicals. The vapors from some household products
may affect the electronic components of your scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do
not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale
will not be used for a long period of time.
9. O- = OverloaLd d Warning or Tare Capacity Warning: Should “ ” appear on the display during O-Ld
a weighing, this indicates that the maximum weighing or Tare capacity has been exceeded.
Remove the weight immediately; otherwise, permanent damage could occur.
Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
One (1) Year Limited Warranty
Taylor® warrants this product to be free from defects in material or workmanship (excluding batteries)
for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or
wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or
repair. If service is required, do not return to retailer. Should this product require service (or
replacement at our option), please pack the item carefully and return it prepaid, along with store
receipt showing the date of purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
www.shoptaylorusa.com
Email: prodsupport@taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
For additional product information, or warranty information outside the USA, please contact us
through shoptaylorusa.com. www.
©2017 Taylor Precision Products and its affiliated companies. Taylor® is a registered trademark of
Taylor Precision Products and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not legal for trade.
CP3896 10.17


Produktspezifikationen

Marke: Taylor
Kategorie: Küchenwaage
Modell: 3896

Brauchst du Hilfe?

Wenn Sie Hilfe mit Taylor 3896 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Küchenwaage Taylor

Bedienungsanleitung Küchenwaage

Neueste Bedienungsanleitung für -Kategorien-