Taylor 3844 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Taylor 3844 (4 Seiten) in der Kategorie Küchenwaage. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
11 lb x 0.1 oz / 5000 g x 1 g
176 oz x 0.1 oz / 5 kg x 0.001 kg
Thank you for purchasing a Taylor® Kitchen Scale.
Your Taylor® scale is an example of superior design
and craftsmanship. Please read this instruction manual
carefully before use. Keep these instructions handy for
future reference.
Digital Kitchen Scale
3844
INSTRUCTION MANUAL
2
Battery Information
This scale operates on 2 – 3 volt CR2032 lithium batteries (installed). There is a
strip under the battery cover to prevent batteries draining in shipping. Please
remove the strip before continuing with these instructions. Also, some models
have a static cling label on the lens to prevent scratching. Please remove
before use.
Replace the batteries when the Low Battery icon “ appears on the upper left
side of the display, or the readings grow dim or irregular. To replace the batteries:
1. Use two 3 volt CR2032 lithium batteries.
2. Remove screw (or screws) from the battery compartment cover on the
bottom of the scale and remove the cover.
3. Remove the old batteries from the compartment.
4. + Place the new batteries with the “ ” sign up into the battery compartment.
5. Replace the battery compartment cover and screw(s).
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items,
do not let children handle batteries. If swallowed, seek medical attention
immediately.
PRECAUTION: Do not dispose of batteries in re. Batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
General Weighing Operation
1. Place the scale on a hard, level surface.
2. /TAREPress the q” button to turn the scale on. The display will turn on, then
shows zero when it is ready for use. If the display does not show zero, press
the “ ” button to reset (tare) the scale to zero.q/TARE
3. Your scale is set at the factory to weigh in pound/ounces. To switch between
pound/ounces (lb oz), kilograms (kg), grams (g), and ounces (oz), press the
” button.UNIT
4. Place the item to be weighed on the center of the platform. The weight will
display. As you add weight, the weight displayed increases.
5. The scale will turn off automatically after approximately 1 minute of non-use
or if there is no change in weight after approximately 3 minutes. Press and
hold the ” button to turn the scale off manually.q/TARE
Tare Operation
You may wish to weigh ingredients in a bowl or other container (not included).
In this case, you will need to tare, or offset, the weight of the bowl so that only
the weight of the ingredients is displayed.
1. Choose a container that will safely balance on the platform without tipping
or falling. Do not use a heavy container, as this might reduce the maximum
capacity of the scale.
2. While the scale is off, place the empty container on the scale platform. Turn
the scale on. The display will turn on and then show zero. The weight of the
container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will
display.
3
4. The weight of additional ingredients may be tared out as well. For
example, if a recipe calls for ½ lb rice and ½ lb beans, place the rice into
the bowl. Once the correct amount of rice is weighed, press the “ q/TARE
button. The scale resets to zero. Add the ½ lbs of beans. Both ingredients
have been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative
number
when the items are removed from the scale. To reset the scale
back to zero for a new measurement, press the “
q/TARE
” button. The
scale resets to zero.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains,
use a mild soap. Never use detergents, excess water, treated cloths,
harsh cleaning agents, or sprays.
2. Do not tamper with the scale’s internal components. Doing so will
invalidate the warranty on this unit and may cause damage. The scale
contains no user-serviceable parts.
3. Although your scale is designed to be maintenance-free, it contains
sensitive electronic parts. Avoid rough treatment. Treat it with care to
ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended for
commercial or medical use.
5. This scale is designed to read weights up to 11 lbs/5 kgs. To prevent
damage, do not place more than 11 lbs/5 kgs on it.
6. Do not store scale where you store cleaning chemicals. The vapors from
some household products may affect the electronic components of your
scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent
run down of the batteries, do not store anything on the scale.
8. Do not dispose of batteries in re. Batteries may explode or leak. Remove
the batteries if the scale will not be used for a long period of time.
Always replace all batteries at the same time; do not mix old and new
batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
9. Overload Warning: O-Ld Should “ ” appear on the display during a
weighing, this indicates that the maximum weighing capacity of the
scale has been exceeded. Remove the weight immediately; otherwise,
permanent damage could occur.


Produktspezifikationen

Marke: Taylor
Kategorie: Küchenwaage
Modell: 3844

Brauchst du Hilfe?

Wenn Sie Hilfe mit Taylor 3844 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Küchenwaage Taylor

Bedienungsanleitung Küchenwaage

Neueste Bedienungsanleitung für -Kategorien-