Taylor 3804-44 Bedienungsanleitung

Taylor Küchenwaage 3804-44

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Taylor 3804-44 (9 Seiten) in der Kategorie Küchenwaage. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/9
Model 3804
Digital Kitchen Scale
Instruction Manual
Thank you for purchasing a Taylor digital kitchen scale. Your Taylor ® scale is an example of ®
superior design and craftsmanship. Please read this instruction manual carefully before use.
Keep these instructions handy for future reference.
Battery Information
This scale operates on one 3 volt CR2032 lithium battery (installed). There is a strip under the
lithium battery cover to prevent battery drain in shipping. Please remove the strip before
continuing with these instructions. Also, some models have a static cling label on the lens to
prevent scratching. Please remove before use.
Replace the battery when the Low Battery warning appears on the display, or the “ or “Lo” ”
readings grow dim or irregular. To replace the batte : ry
1. Use 3 volt CR2032 lithium battery.one
2. Remove screw (or screws) from the battery compartment cover on the bottom of the scale
and remove the cover.
3. Remove the old battery from the compartment.
4. Place the new battery with the “+” sign up into the battery compartment.
5. Replace the battery compartment cover and screw(s).
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children
handle batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the
battery if the scale will not be used for a long period of time.
General Weighing Operation
1. Place the scale on a hard, level surface.
2. Press the “ON/OFF” button to turn the scale on. The display will show “ ” and then zero
when it is ready for use. If the display does not show zero, press the “TARE/ZERO” button to
reset (tare) the scale to zero.
3. Your scale weighs in pounds/ounces (lb), ounces (oz) or grams (g). Press the “UNITS” button
to change the units of measurement.
4. Place the item to be weighed on the center of the platform. The weight will display. As you
add weight, the weight displayed increases. A “○” symbol on the display indicates the weight is
stable.
5. The scale will turn off automatically after approximately 1 minute of non-use or if there is no
change in weight after approximately 3 minutes. Press the “ON/OFF” button to turn the scale off
manually.
Tare Operation
You may wish to weigh ingredients in the included bowl or other container (not included). In this
case, you will need to tare, or offset, the weight of the bowl so that only the weight of the
ingredients is displayed.
1. Choose a container that will safely balance on the platform without tipping or falling. Do not
use a heavy container, as this might reduce the maximum capacity of the scale.
2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The
display will turn on and then show zero. The weight of the container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will display.
4. The weight of additional ingredients may be tared out as well. For example, if a recipe calls
for ½ lb rice and ½ lb beans, place the rice into the bowl. Once the correct amount of rice is
weighed, press “TARE/ZERO” until the display is reset to zero. Add the ½ lb of beans. Both
ingredients have been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative number when the items
are removed from the scale. To reset the scale back to zero for a new measurement, press
“TARE/ZERO” until the display resets to zero.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap.
Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Avoid
contact with acids, such as citrus juices. DO NOT immerse the electronic scale in water or wash
in a dishwasher.
2. Do not tamper with the scale’s internal components. Doing so will invalidate the warranty on
this unit and may cause damage. The scale contains no user-serviceable parts.
3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts.
Avoid rough treatment. Treat it with care to ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended for commercial or
medical use.
5. This scale is designed to read weights up to 6.6 lb x 002 lb 3 g x 1 g / 1 oz x 0. 0. / 000 05 05
oz. To prevent damage, do not place more than 6.6 lb / 3 g / 1 on it. 000 05 oz
6. Do not store scale where you store cleaning chemicals. The vapors from some household
products may affect the electronic components of your scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent run down of the
battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if the
scale will not be used for a long period of time.
9. “UnSt” = Unstable Warning. Should “UnSt” appear on the display, this indicates the scale is
unstable. Place the scale on a hard, level surface during use.
10. -d = Overload Warning -d“oL ” : Should “oL ” appear on the display during a weighing, this
indicates that the maximum weighing capacity has been exceeded. Remove the weight
immediately; otherwise, permanent damage could occur.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
One (1) Year Limited Warranty
Taylor® warrants this product to be free from defects in material or workmanship (excluding
batteries) for (1) year for the original purchaser from date of retail purchase. It does not one
cover damages or wear resulting from accident, misuse, abuse, commercial use, or
unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should
this product require service (or replacement at our option), please pack the item carefully and
return it prepaid, along with store receipt showing the date of purchase and a note explaining
reason for return to:
Taylor Precision Products, Inc.
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
www.taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
For additional product information, or warranty information outside the USA, please contact us
through www.taylorusa.com.
©2013 Taylor Precision Products, Inc. and its affiliated companies, all rights reserved. Taylor®
and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products, Inc.
and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not legal for trade.
CP3804FZS .13 12

Produktspezifikationen

Marke: Taylor
Kategorie: Küchenwaage
Modell: 3804-44

Brauchst du Hilfe?

Wenn Sie Hilfe mit Taylor 3804-44 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Küchenwaage Taylor

Taylor

Taylor 384521 Bedienungsanleitung

10 September 2024
Taylor

Taylor 5302553 Bedienungsanleitung

3 September 2024
Taylor

Taylor 3812 Bedienungsanleitung

25 August 2024
Taylor

Taylor 3842 Bedienungsanleitung

25 August 2024
Taylor

Taylor 1250BK Bedienungsanleitung

25 August 2024
Taylor

Taylor 1053 Bedienungsanleitung

25 August 2024
Taylor

Taylor 3907 Bedienungsanleitung

25 August 2024
Taylor

Taylor 3828 Bedienungsanleitung

25 August 2024
Taylor

Taylor 3817 Bedienungsanleitung

25 August 2024
Taylor

Taylor 3896 Bedienungsanleitung

25 August 2024

Bedienungsanleitung Küchenwaage

Neueste Bedienungsanleitung für -Kategorien-

Jata

Jata 765 Bedienungsanleitung

15 Oktober 2024
Korona

Korona Ronda Bedienungsanleitung

14 Oktober 2024
Hitachi

Hitachi HKS210 Bedienungsanleitung

14 Oktober 2024
Jata

Jata 773 Bedienungsanleitung

13 Oktober 2024
Korona

Korona Mia Bedienungsanleitung

12 Oktober 2024
Scarlett

Scarlett SC-KS57P04 Bedienungsanleitung

11 Oktober 2024
AcuRite

AcuRite 00954 Bedienungsanleitung

11 Oktober 2024
Witt

Witt WCKS5BM Bedienungsanleitung

11 Oktober 2024
Orbegozo

Orbegozo PC 1022 Bedienungsanleitung

10 Oktober 2024
Soehnle

Soehnle 66308 Bedienungsanleitung

9 Oktober 2024