Supermicro SuperServer SYS-620BT-HNC8R Bedienungsanleitung
Supermicro
Server
SuperServer SYS-620BT-HNC8R
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro SuperServer SYS-620BT-HNC8R (123 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war fĂĽr 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/123
USER’S MANUAL
Revision 1.0
SuperServer®
620BT-HNTR
620BT-HNC8R
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A or Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in industrial environment for Class A device or in residential
environment for Class B device. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: April 08, 2021
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2021 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
3
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides
information for the installation and use of the server. Installation and maintenance should be
performed by experienced technicians only.
Please refer to the 620BT-H Series server speciîšżcations page on our website for updates on
supported memory, processors and operating systems (http://www.supermicro.com).
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: https://www.supermicro.com/wdl
• Product safety info: http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
support@supermicro.com
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Secure Data Deletion
A secure data deletion tool designed to fully erase all data from storage devices can be found
on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wdl/utility/
Lot9_Secure_Data_Deletion_Utility/
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
6
Preface
Installing the Air Shroud ....................................................................................................62
Checking the Airow ......................................................................................................62
3.8 Power Supply .....................................................................................................................63
3.9 Cable Routing Diagram ......................................................................................................64
3.10 BMC Reset ........................................................................................................................65
Chapter 4 Motherboard Connections
4.1 Power Connections ............................................................................................................66
4.2 Headers and Connectors ...................................................................................................67
4.3 Input/Output Ports ..............................................................................................................69
4.4 Jumpers ..............................................................................................................................72
How Jumpers Work ...........................................................................................................72
4.5 LED Indicators ....................................................................................................................74
Chapter 5 Software
5.1 Microsoft Windows OS Installation .....................................................................................75
5.2 Driver Installation ................................................................................................................77
5.3 SuperDoctor® 5 ...................................................................................................................78
5.4 BMC ....................................................................................................................................79
BMC ADMIN User Password ............................................................................................79
Chapter 6 Optional Components
6.1 Optional Parts List ..............................................................................................................80
6.2 M.2 NVMe Carrier Card .....................................................................................................80
6.4 GPU Support ......................................................................................................................80
Chapter 7 Troubleshooting and Support
7.1 Information Resources .......................................................................................................81
Website .............................................................................................................................81
Direct Links for the 620BT-H Series System .................................................................81
Direct Links for General Support and Information .......................................................81
7.2 Baseboard Management Controller (BMC) ........................................................................82
7.3 Troubleshooting Procedures .............................................................................................83
No Power ..........................................................................................................................83
System Boot Failure .........................................................................................................84
Memory Errors ..................................................................................................................84
Losing the System's Setup Conîšżguration .........................................................................84
When the System Becomes Unstable ..............................................................................85
7.4 Crash Dump Using BMC ....................................................................................................87
8
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: marketing@supermicro.com (General Information)
support@supermicro.com (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: sales@supermicro.nl (General Information)
support@supermicro.nl (Technical Support)
rma@supermicro.nl (Customer Support)
Website: www.supermicro.nl
Asia-Paciîšżc
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Email: support@supermicro.com.tw
Website: www.supermicro.com.tw
Preface
9
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the SuperServer
620BT-H Series. It is based on the X12DPT-B6 motherboard and the CSE-827BQ-R2K60P
chassis.
The following provides an overview of the speciîšżcations and capabilities.
System Overview
Motherboard X12DPT-B6
Chassis CSE-827BQ-R2K60P
Processor
Support
Supports dual Intel Xeon Scalable Family 3rd Gen/4th Gen Series Processors (in Socket P+)
with a thermal design power (TDP) of up to 185W (Air Cooling) or 270W (Liquid Cooling) and
three UPIs (UltraPath Interconnect) of up to 11.2 GT/s per node
Chipset Intel PCH C621A (LBG-R)
Memory 16 DRAM DIMMs plus two PMem (Intel® Optane™ PMem 200 Series) per node. Up to 4TB
RDIMM, DDR4-3200MHz in 16 memory slots
Drive Support
Front hot-swappable drives include:
12 NVMe/SATA drives for 620BT-HNTR
12 NVMe/SAS/SATA drives for 620BT-HNC8R
Internal M.2 drives per node include:
Default carrier with two M.2 NVMe/SATA SSDs
Optional carrier with two M.2 NVMe SSDs and Marvell HW RAID
Internal Connector:
VROC key header
Expansion Slots Two PCIe 4.0 x16 slots for each node
Networking One AIOM or any compliant OCP 3.0 SFF Network Interface Card per node
One dedicated LAN port for BMC per node
I/O Ports Two USB 3.0 ports per node
One VGA port per node
System Cooling
Four 8-cm mid-chassis fans
Two CPU heatsinks per node
One air shroud per node
Power Two redundant 2600W modules, 80Plus level Titanium power supplies
Form Factor 2U rackmount; (WxHxD) 17.6 x 3.5 x 28.8 in. (447 x 88 x 730 mm)
Note1: A Quick Reference Guide can be found on the product page of the Supermicro website.
Note2: The following safety models associated with the 620BT-H Series have been certiîšżed
as compliant with CSA or UL models: 827B-R26X12 and 827B-26 .
12
Chapter 1: Introduction
Rear View
Figure 1-3. System: Rear View
Node C Node A
Node D Node B
Power Supply
D1
D1
Node Handle Node Handle
B1
A1
C1
B1
A
A1
VGA Port
USB Ports
BMC LAN
Dual Function Switch
C1
A
A
A
System Features: Rear
Feature Description
Nodes A, B, C, D Independent computing nodes
Power Supplies Two 2600W redundant power supplies
VGA Port Video port
USB Ports Two USB 3.0 ports
LAN Port Dedicated BMC LAN port
Dual Function Switch A switch that can function as either a UID LED switch or a BMC reset switch. See
Chapter 4 for a description of the dual function switch.
Node Handles Two handles per node supporting node tray removal
Expansion Slot Locations
Item Description
1PCIe 4.0 p12-x16 slot (CPU1) in each node
1PCIe 4.0 p12-x16 slot (CPU2) in each node
AAIOM PCIe 4.0 p12-x16 slot (CPU1) in each node
CPU1 CPU2
13
Chapter 1: Introduction
AIOM Network Ports
Power Supply Options
Power Supply Module Options
Watts Part Number 80Plus Level
2600 PWS-2K60A-1R Titanium
Network ports are provided by the AIOM card, which o󰀨ers several choices of connection
speeds and types.
AIOM Networking Add-on Card Options
Speed Ports Add-on Card Part Number
GbE
Two RJ45 AOC-AG-i2M
Four RJ45 AOC-AG-i4M
Four SFP AOC-AG-i4SM
10 G SFP+
Two SFP+ AOC-ATG-i2SM
Four SFP+ AOC-ATG-i4SM
Two SFP+ & two RJ45 AOC-ATG-i2T2SM
10GBase-T Two RJ45 AOC-ATG-i2TM
25 GbE
Two SFP28 & two RJ45 AOC-AH25G-m2S2TM
One SFP28 MCX623432AC-ADAB
Two SFP28 MCX4621A-ACAB
100 GbE QSFP56 MCX623435AC-VDAB
Updates: https://www.supermicro.com/en/support/resources/aoc/aiom
15
Chapter 1: Introduction
Figure 1-5. 620BT-HNC8R Node Tray
SAS Controller Card for
620BT-HNC8R
16 DDR4 DIMM slots
plus 2 PMem slots
AIOM Slot
Storage Adapter
Dual Intel® Xeon® Scalable
Processors
M.2 Card with Riser
16
Chapter 1: Introduction
1.3 System Architecture
This section covers the printed circuit board (PCB) locations and system block diagrams.
Main Components
Figure 1-6. Main Component Locations
Storage Adapter
Motherboard
PCIe x16 Riser Card
M.2 Card with Riser
Single Node
SAS Controller Card for 620BT-HNC8R
Storage Backplane
AIOM
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Server |
| Modell: | SuperServer SYS-620BT-HNC8R |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro SuperServer SYS-620BT-HNC8R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Server Supermicro
6 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
29 August 2024
Bedienungsanleitung Server
- Server Acer
- Server Asus
- Server Gigabyte
- Server HP
- Server Medion
- Server Sony
- Server ZyXEL
- Server Buffalo
- Server Allnet
- Server Linksys
- Server Netgear
- Server Fantec
- Server Technics
- Server Abus
- Server Megasat
- Server Toshiba
- Server Lindy
- Server Dell
- Server Lenovo
- Server Tripp Lite
- Server TRENDnet
- Server Western Digital
- Server AVerMedia
- Server Veritas
- Server Black Box
- Server SilverStone
- Server NEC
- Server Monacor
- Server Seagate
- Server Fujitsu
- Server Maxdata
- Server Revox
- Server Totolink
- Server Conceptronic
- Server D-Link
- Server QNAP
- Server Digitus
- Server LevelOne
- Server APC
- Server Cisco
- Server Freecom
- Server Synology
- Server Kramer
- Server Intellinet
- Server Eaton
- Server Hikvision
- Server FLIR
- Server ELAC
- Server Planet
- Server Asustor
- Server Blackmagic Design
- Server Dane Elec
- Server Digi
- Server Dual Bay
- Server EMC
- Server GeoVision
- Server Ibm
- Server In Win
- Server Iomega
- Server LaCie
- Server Provision ISR
- Server Quantum
- Server Sun
- Server AMX
- Server ACTi
- Server Vimar
- Server Siig
- Server Intel
- Server Moxa
- Server StarTech.com
- Server Smart-AVI
- Server Mobotix
- Server Sonnet
- Server SEH
- Server Gefen
- Server Avocent
- Server Atlantis Land
- Server Hanwha
- Server ATen
- Server KanexPro
- Server Axis
- Server Advantech
- Server HGST
- Server Kiloview
- Server B&B Electronics
- Server Extron
- Server Atlona
- Server Rocstor
- Server Raidsonic
- Server G-Technology
- Server Infortrend
- Server Areca
- Server Silex
- Server Promise Technology
- Server Matrox
- Server Origin Storage
- Server Ernitec
- Server EXSYS
- Server Raritan
- Server C2G
- Server Chenbro Micom
- Server Lantronix
- Server IStarUSA
- Server Valcom
- Server TAIDEN
- Server MvixUSA
- Server Opengear
- Server Mr. Signal
- Server NETSCOUT
Neueste Bedienungsanleitung fĂĽr -Kategorien-
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
6 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024