Supermicro SuperServer E200-8B Bedienungsanleitung

Supermicro Server SuperServer E200-8B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro SuperServer E200-8B (92 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/92

SUPER ®

USER'S MANUAL

Revision 1.0

SuperServer®

E200-8B

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: January 12, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the server. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (www.supermicro.com).

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Server
Modell:	SuperServer E200-8B
Breite:	195 mm
Tiefe:	195 mm
Gewicht:	1750 g
Produktfarbe:	Schwarz
Höhe:	43 mm
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 85 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Stromversorgung:	60 W
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 95 %
Ein-/Ausschalter:	Ja
Netzteiltyp:	Gleichstrom
Prozessorfamilie:	Intel
Anzahl der unterstützten Speicherlaufwerke:	1
RAID Level:	0, 1,10
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	1
Prozessorsockel:	BGA 1170
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	Intel® Celeron®
Unterstützte Arbeitsspeicher:	DDR3-SDRAM
Ohne ECC:	Ja
RAM-Speicher maximal:	8 GB
Unterstützte Speicherlaufwerk-Schnittstellen:	Serial ATA II, Serial ATA III
SATA III Anschlüsse:	4
BIOS-Speichergröße:	64 Mbit
BIOS-Typ:	EEPROM
ACPI-Version:	5.0
Ethernet Schnittstellen Typ:	Fast Ethernet, Gigabit Ethernet
LAN-Controller:	Intel® I210-AT
Mitgelieferte Software:	SuperDoctor® 5\r\nWatch Dog
Nachhaltigkeitszertifikate:	RoHS
On-Board Grafikadaptermodell:	Intel® HD Graphics
SATA II Anschlüsse:	2
Trusted Platform Module (TPM):	Ja
Lüfterdurchmesser:	40 mm
Anzahl Lüfter:	1 Lüfter
Memory Formfaktor:	204-pin SO-DIMM
Speicherspannung:	1.35 V
Anzahl unterstützter Prozessoren:	1
Zahl der DIMM Slots:	2
unterstützte Speicherlaufwerksgrößen:	2.5 "
Trusted Platform Module (TPM) Version:	1.2
Unterstützte maximale Prozessortaktrate:	2.42 GHz
Unterstützte DIMM-Modulkapazitäten:	2GB, 4GB
Maximaler Cache:	2 MB
BIOS-Funktionen:	Plug & Play, UEFI
Ethernet/LAN:	Ja