Supermicro SuperServer 6028UX-TR4 Bedienungsanleitung
Supermicro
Server
SuperServer 6028UX-TR4
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro SuperServer 6028UX-TR4 (130 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/130
User's Manual
Revision 1.0b
S SUPER ERVER®
6028UX-TR4
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0b
Release Date: July 21, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6028UX-TR4.
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 6028UX-TR4 is a high-end server based on the SC829UACN4-R1K02
2U rackmount chassis and the dual processor X10DRU-X serverboard.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X10DRU-X serverboard and
the SC829UACN4-R1K02 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6028UX-TR4
into a rack and check out the server conguration prior to powering up the system.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6028UX-TR4.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRU-X serverboard, including
the locations and functions of connections, headers and jumpers. Refer to
this chapter when adding or removing processors or main memory and when
reconguring the serverboard.
Chapter 6: Advanced Chassis Setup
Refer to Chapter 6 for detailed information on the SC829UACN4-R1K02 server
chassis. You should follow the procedures given in this chapter when installing,
removing or reconguring SATA or peripheral drives and when replacing system
power supply units and cooling fans.
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Server |
| Modell: | SuperServer 6028UX-TR4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro SuperServer 6028UX-TR4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Server Supermicro
16 April 2024
29 Februar 2024
26 Februar 2024
19 Februar 2024
18 Februar 2024
12 Februar 2024
9 Februar 2024
Bedienungsanleitung Server
- Server Acer
- Server Asus
- Server Gigabyte
- Server HP
- Server Buffalo
- Server Netgear
- Server Megasat
- Server Dell
- Server Lenovo
- Server Tripp Lite
- Server TRENDnet
- Server Western Digital
- Server AVerMedia
- Server Veritas
- Server Black Box
- Server NEC
- Server Monacor
- Server Seagate
- Server Fujitsu
- Server QNAP
- Server Digitus
- Server APC
- Server Cisco
- Server Synology
- Server Intellinet
- Server Eaton
- Server Hikvision
- Server Planet
- Server Asustor
- Server Dane Elec
- Server LaCie
- Server Quantum
- Server Siig
- Server Moxa
- Server StarTech.com
- Server ATen
- Server Axis
- Server B&B Electronics
- Server Infortrend
- Server Areca
- Server Origin Storage
- Server Lantronix
Neueste Bedienungsanleitung für -Kategorien-
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
18 April 2024
17 April 2024
16 April 2024
15 April 2024
14 April 2024
14 April 2024