Supermicro SuperServer 6018R-WTRT Bedienungsanleitung

Supermicro Server SuperServer 6018R-WTRT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro SuperServer 6018R-WTRT (126 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/126

USER'S MANUAL

Revision 1.0b

SUPERSERVER

6018R-WTR

6018R-WTRT

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: June 10, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6018R-WTR(T).

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 6018R-WTR(T) is a 1U rackmount server based on the

SC815TQ-R706WB server chassis and the X10DRW-i(T) serverboard. The

SuperServer 6018R-WTR(T) system's WIO platform has major advantages over

E-ATX/ATX platforms in small form factor 1U and 2U systems by increasing I/O

performance by use of multiple full-height, full-length add-on cards. Please refer to

our web site for updates on supported processors.

The only difference between the 6018R-WTR and 6018R-WTRT servers is that

the 6018R-WTR use 1Gps dual LAN ports and the 6018R-WTRT uses 10Gps dual

LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRW-i(T) serverboard

and the SC815TQ-R706WB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6018R-WTR(T)

into a rack and check out the server conﬁ guration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6018R-WTR(T).

iii

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Server
Modell:	SuperServer 6018R-WTRT
Breite:	437 mm
Tiefe:	650 mm
Gewicht:	18100 g
Produktfarbe:	Schwarz
Höhe:	43 mm
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Eingebauter Ethernet-Anschluss:	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	3
Warentarifnummer (HS):	84714100
Ethernet LAN Datentransferraten:	100,1000,10000 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Kupfer Ethernet Verkabelungstechnologie:	1000BASE-T, 100BASE-TX, 10GBASE-T
Prozessorfamilie:	Intel
Anzahl der unterstützten Speicherlaufwerke:	4
RAID Level:	0, 1,5, 10
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	6
Gehäusetyp:	Rack (1U)
Systembus-Rate:	9.6 GT/s
Prozessorsockel:	LGA 2011-v3
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	Intel® Xeon®
Unterstützte Arbeitsspeicher:	DDR4-SDRAM
ECC:	Ja
RAM-Speicher maximal:	1000 GB
Unterstützte Speicherlaufwerk-Schnittstellen:	Serial Attached SCSI (SAS), Serial ATA
BIOS-Speichergröße:	128 Mbit
Ethernet Schnittstellen Typ:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
LAN-Controller:	Intel X540, Realtek RTL8211E
Nachhaltigkeitszertifikate:	RoHS
Anzahl serielle Anschlüsse:	1
On-Board Grafikadaptermodell:	Aspeed AST2400
PCI-Express x16-Slots:	2
Speicherspannung:	1.2 V
PCI-Express x8-Slots:	1
Zahl der DIMM Slots:	16
unterstützte Speicherlaufwerksgrößen:	3.5 Zoll
HDD Laufwerkschächte Hot-Swap:	Ja
IPMI LAN (RJ-45)-Anschluss:	Ja
Intel® Xeon-Serie:	E5-2600
Maximaler RDIMM Speicher:	32 GB
Maximaler Cache:	45 MB
BIOS-Funktionen:	APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI
DC Ausgangsstrom (+5 V):	3 A