Supermicro SuperServer 5039MP-H8TNR Bedienungsanleitung

Supermicro Server SuperServer 5039MP-H8TNR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro SuperServer 5039MP-H8TNR (10 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Information for Lot 9 of d )ErP (Eco esign
This addresses Ecodesign addendum European Union (EU) requirements for servers and storage
products addendum. All data and ratings within this are in reference only to the Supermicro product(s) in
th toe manual. The below information conforms Commission requirements laid down in Annex II of the
Regulation . 2019/424
3(1)(a): See Section 1.1 of the system manual for the product type.
3(1)(b): e See the title page and preface of th system manual for trademark and the
manufacturer’s address.
3(1)(c): See the title page of the system manual for product model number(s).
3(1)(d): See the serial number on the physical system to determine the year . of manufacture
3(1)(e-j ): PSU Efficiency V ) (F and Power Factor alue (Table rom 80 Plus report)
PSU Model #: PWS-2K20A 1R-
Watts: 22 W00
PSU E fficiency
P Fower actor
% of R Lated oad
% % % %10 20 50 100
50 %
Single -Output (AC DC)
93. %49
95.26 %
96.26 %
94. %38
96.26
System (EUT) E P fficiency in I Sdle tate ower (Table)
Representative
Configurations
Measured Idle State
Power (W)
Calculated Idle Power
Allowance (W)
High-E Pnd erformance
C onfiguration
433.6
759.61
Typical Conguration
N/A
N/A
Low-E Pnd erformance
C onfiguration
326.5
571.12
System E(EUT) fficiency in A Sctive tate P ower (Table)
Representative
Configurations
E Sfficiency core
Minimum A Sctive tate
Efficiency for 2-Socket
S erver
High-End Performance
Configuration
32.9
8
Typical Conguration
N/A
Low-End Performance
Configuration
1 9.2
3(1)( ): k is The operating condition class A2.
Dry bulb temp °C
Humidity range (non- )condensing
Operating
condition
class
Allowable
range
Recom
mended
range
Allowable range
Dew Point (DP)
Relative Humidity
(RH)
Recommended
range
Max dew
point (°C)
Maximum
rate of
change
(°C/hr)
A1
15-32
18-27
–
12 °C DP and
8 %
RH to
17 °C DP and
80 % RH
–
9 °C DP to
15 °C
DP and
60 % RH
17
5/20
A2
10-35
18-27
–
12 8 % °C DP and
RH to
21 °C DP and
80 % RH
Same as A1
21
5/20
A3
5-40
18-27
–
12 8 % °C DP and
RH to
24 °C DP and
85 % RH
Same as A1
24
5/20
A4
5-45
18-27
–
12 8 % °C DP and
RH to
24 °C DP and
90 % RH
Same as A1
24
5/20
3(1)( ): l The idle state power at the higher boundary temperature of the operating conditions
class is 433.6W
3(1)( ): m The active state efficiency and performance is 32.9
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The rst is with a Unied Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB î‹Šash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
information.
3(1)( ): o List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): - - List of all current SKUs within this product family: SYS 5039MP H8TNR.
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of neodymium in the HDD is 0.0 if manufactured by Western
Digital, and is between 5-25 grams if manufactured by Seagate.
3(3)(b): Please see the disassembly instructions on the next page.


Produktspezifikationen

Marke: Supermicro
Kategorie: Server
Modell: SuperServer 5039MP-H8TNR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Supermicro SuperServer 5039MP-H8TNR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Server Supermicro

Bedienungsanleitung Server

Neueste Bedienungsanleitung für -Kategorien-