Supermicro A+ Server 1114S-WTRT Bedienungsanleitung

Supermicro Server A+ Server 1114S-WTRT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro A+ Server 1114S-WTRT (13 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/13

Information for Lot 9 of d )ErP (Eco esign

This addresses Ecodesign addendum European Union (EU) requirements for servers and storage products.

All data and ratings within this addendum are in reference only to the in thSupermicro product(s) e

manual. the The below information conforms with requirements laid down in Annex II of Commission

Regulation . 2019/424

3(1)(a): See Section 1.1 of the system manual for the product type.

3(1)(b): e See the title page and preface of th system manual for trademark and the

manufacturer’s address.

3(1)(c): See the title page of the system manual for product model number(s).

3(1)(d): See the serial number on the physical system to determine the year . of manufacture

3(1)(e-j ): PSU Efficiency V ) (F and Power Factor alue (Table rom 80 Plus report)

PSU Model #: PWS- - 504P 1R

Watts: 500W

PSU E fficiency

P F ower actor

% of R Lated oad

20 %

50 %

100

50 %

Single -Output (AC DC)

86.16 %

91.84 %

94.11 %

92.61%

0.97

System (EUT) E P fficiency in I Sdle tate ower (Table)

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power Allowance

(W)

High-End Performance

Configuration

191

374.85

Typical Configuration

N/A

Low-End Performance

Configuration

119

204.37

System E(EUT) fficiency in A Sctive tate P ower (Table)

Representative

Configurations

Active tate S

E Sfficiency core

(Effserver)

Minimum A Sctive tate Efficiency for

2-S S ocket erver

High-End Performance

Configuration

56.1

Typical Configuration

N/A

Low-End Performance

Configuration

3(1)( ): k is . The operating condition class A2

Dry bulb temp °C

Humidity range, non condensing-

Operating

condition

class

Allowable

range

Recom 

mended

range

Allowable range

Recommended range

Max dew

point (°C)

Maximum

rate of

change

(°

C/hr)

15 32-

18 27-

–

12 and °C P Dew oint (DP)

8 % relative humidity (RH) to

17 ° and 80 C DP % RH

–

9 °C DP to

15 °C and DP

60 % RH

5/20

10 35-

18 27-

–

12 and °C DP 8 % RH to

21 and 80 °C DP % RH

Same as A1

5/20

5-40

18 27-

–

12 and °C DP 8 % RH to

24 and 85 °C DP % RH

Same as A1

5/20

5-45

18 27-

–

12 and °C DP 8 % RH to

24 and 90 °C DP % RH

Same as A1

5/20

3(1)( ): l The idle state power at the higher boundary temperature of the operating conditions

class is 2 . W. 25 38

3(1)( ): m The active state efficiency and performance is 56.1.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)( ): o List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family: N/A.

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of eodymium in the HDD is n 0.0 if manufactured by Western

Digital, and is between 5- 25 grams if manufactured by Seagate.

3(3)(b): Please see the disassembly instructions on the next page.

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Server
Modell:	A+ Server 1114S-WTRT
Breite:	437 mm
Tiefe:	597 mm
Produktfarbe:	Schwarz
Höhe:	43 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Paketgewicht:	20900 g
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Warentarifnummer (HS):	84714100
Ethernet LAN Datentransferraten:	10,100,1000,10000 Mbit/s
Stromversorgung:	500 W
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 60 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Ein-/Ausschalter:	Ja
Prozessorfamilie:	AMD
Unterstützte Speicherlaufwerke:	HDD & SSD
Anzahl der unterstützten Speicherlaufwerke:	12
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	7
Gehäusetyp:	Rack (1U)
Prozessorsockel:	Socket SP3
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	AMD EPYC
PC Gesundheitsüberwachung:	CPU, FAN, Temperature
Unterstützte Arbeitsspeicher:	DDR4-SDRAM
ECC:	Ja
RAM-Speicher maximal:	2000 GB
Unterstützte Speicherlaufwerk-Schnittstellen:	PCI Express, Serial ATA III
Anzahl der M.2 (M)-Steckplätze:	2
SATA III Anschlüsse:	2
BIOS-Speichergröße:	32 Mbit
BIOS-Typ:	AMI
Ethernet Schnittstellen Typ:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
LAN-Controller:	Broadcom 57416
Nachhaltigkeitszertifikate:	RoHS
Eingangsstrom:	2.6 - 6.1 A
Eingebauter Prozessor:	Nein
PCI-Express-Slots-Version:	4.0
On-Board Grafikadaptermodell:	Aspeed AST2500
PCI-Express x16-Slots:	3
Lüfterdurchmesser:	40 mm
Anzahl Lüfter:	4 Lüfter
Kühlung:	Aktiv
Memory Formfaktor:	288-pin DIMM
80 Plus Zertifizierung:	80 PLUS Platinum
Unterstützung für redundantes Netzteil:	Ja
Anzahl unterstützter Prozessoren:	1
Zahl der DIMM Slots:	8
Unterstützte RDIMM Taktraten:	3200 MHz
unterstützte Speicherlaufwerksgrößen:	2.5, M.2 "
HDD Laufwerkschächte Hot-Swap:	Ja
Anzahl der installierten redundanten Netzteile:	1
Backplanes-Unterstützung:	Ja
Anzahl der 2,5" Erweiterungseinschübe:	10
Anzahl der Haupt-Netzteile:	1
Integrierter BMC mit IPMI:	Ja
IPMI LAN (RJ-45)-Anschluss:	Ja
DC Ausgangsstrom (+12 V):	42 A
Ethernet/LAN:	Ja