Sony RM-VZ220 Bedienungsanleitung
Sony
Afstandsbediening
RM-VZ220
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Sony RM-VZ220 (17 Seiten) in der Kategorie Afstandsbediening. Dieser Bedienungsanleitung war fĂŒr 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/17
4-170-642- (1)41
Remote Commander
RM-VZ220
©2016 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
îî
Reorient or relocate the receiving antenna.
îî
Increase the separation between the equipment and receiver.
îî
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
îî
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturerâs code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturerâs code.
Note
Only a TV can be assigned to the Device Select button. You can assign any device to TV
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes
îî
Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.
îî
Do not use an old battery with a new one, or mix different types of batteries together.
îî
If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte from leaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m (36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 Ă 213 Ă 27 mm (2 1/8 Ă 8 1/2 Ă 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:
îî
Carefully perform the setup procedure of âStartup Guide.â If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturerâs code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see âSearching for the correct codeâ).
îî
Aim the RM-VZ220 directly at the device.
îî
Remove any obstacles in the path between the RM-VZ220 and the device.
îî
Make sure you have pressed the correct Device Select button.
îî
Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.
îî
The batteries are weak, or not inserted correctly. Replace them with new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide This guide shows you how to set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see âOperate the device.â
Set the manufacturerâs code
Example: To set up a Philips TV
1 Find the manufacturerâs code in âManufacturerâs Code List.â
0
ble
be
Manufacturer âs Code List /
List a de cĂł digos del fa bricante
En g li s h
Th e following tables sh ow brand names ( ) and th eir corresponding Bran d
code numbers ( ).Cod e No.
1 Press and hold for more th an 3 seconds.SET
Th e indicator li ghts u p.SET
Whi le keep ing held down, pres s th e desir ed Device Select but ton, SET
th en releas e both butt ons.
2 Enter th e manufacturer âs code.
Th e indicator flas hes thr ee times and tur ns off.SET
Es p añ o l
La sigui ente tabla mues tra los nombres de las marcas ( ) y el nĂșmero Br and
de cĂłdigo correspondie nte ( ).Cod e No.
1 Presi one y mantenga pres ionado el botĂłn durante mĂĄs de 3 segundos.SET
Se encenderĂĄ l a luz indi cadora .SET
Mientr as tiene pr esionado el botĂłn , pr esione el botĂłn de sel ecciĂłn de SET
dis positivo deseado y luego suel te ambos botones.
2 Ingrese el cĂłdigo del fabri cante.
El indi cador par padearĂĄ tr es veces y se apagarĂĄ.SET
Br an d Cod e No .
Acer 01339
Action 00650
Admiral 00463
A kai 00812, 01675, 00702, 02232
Akir a 01733
AOC 01365, 01589
Apex Digital 00748
A ventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions 01447
Crosley 00054
Curtis 02352
Curtis M athes 00054, 00154, 00702, 01661
Daew oo 01661
Digital Li festyles 01765
Durabrand 00463, 00171
Dyn ex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emer son 01864, 00154, 00463, 00171,
01661, 01394
Em prex 01765
En vision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Har man/Kar don 00054
H isense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Inf inity 00054
Insignia 01564, 00171, 02049
J BL 00054
J CB 00000
JVC 00731, 01253, 01601, 01774
K DS 01687
Kolin 01331
LG 01423, 02358
L XI 00054, 00154, 00156
M AG 01687
M agnavox 01454, 01866, 00054, 01254,
01365, 02372
Mar antz 00054
M atsushita 00650
M axent 01755
Memorex 00154, 00463, 00150
M GA 00150
Midland 00051
Br an d Cod e No .
Mitsubishi 01250, 00150, 00836
N AD 00156
NEC 01797
NetT V 01755
N orcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PAR K 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pi oneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Pr oscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R adioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sam po 01755
Sam sung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
T atung 01756
T CL 02403, 02429
Technic s 00051
Techwood 00051
Teknika 00054, 00150
Telef unken 00702
Toshiba 01524, 00154, 00156, 00650
T VS 00463
V enturer 01865
V ideocon 01540, 01541, 02436
Vidikron 00054
Vi ewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
T V / T V
Br an d Cod e No .
W ards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zen ith 00463, 01661
Br an d Cod e No .
A ccurian 10675
A kai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineV ision 10869
Citizen 10695
CyberHome 11024
Daew oo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emer son 10591, 10675
En terprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Har man/Kar don 11229
Hitachi 10573, 10664
H iteker 10672
Insignia 10675, 12428, 12596
Integr a 11769, 10627, 12147
JVC 10623, 10867, 11164
K enwood 10490
LG 10591, 10741, 10869
M agnavox 10503, 10539, 10646, 10675,
11354
Mar antz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
N AD 10741, 12572
Olevia 12331
On kyo 10503, 11769, 10627, 11627,
12147
Br an d Cod e No .
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pi oneer 10142, 10631, 11571, 12442
Polk Audio 10539
P residian 10675
Pr oscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Sam sung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
T CL 12587
Technic s 10490
T ivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
U rban Concepts 10503
Viore 12553
Vizio 12563
Vtr ek 12587
Xbox 10522, 12083
Yam aha 10490, 10539, 10497, 10817,
12298
Zen ith 10503, 10591, 10741, 10869
DV D p layer / R epr o duc to r de DVD
Br an d Cod e No .
A ccurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
M agnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Br an d Cod e No .
Pi oneer 10631
RCA 10522
Sam sung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zen ith 10741
DV D r eco r de r / G ra ba do ra de DV D
Blu- ra y Dis c/HD- DV D p laye r/
Re pr od uct o r d e B lu-r ay D isc/HD -D VD
Br an d Cod e No .
Denon 12258
Insignia 10675, 12428, 12596
Integr a 11769, 12147
LG 10741
M agnavox 10675
Mar antz 12414, 12432
Microsoft 12083
N AD 12572
Olevia 12331
On kyo 11769, 12147
Oppo 12545
Panasonic 11641
Br an d Cod e No .
Philips 12084, 12434
Pi oneer 10142, 12442
RCA 11769
Sam sung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yam aha 12298
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
TV / TV
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
El b d
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R di Sh k
If your device is not listed, try the Search function (see âSearching for the correct codeâ).
2 Press and hold for more than 3 seconds.SET
The indicator lights up.SET
While keeping held down, press SET
the desired , Device Select button
then release both buttons.
3 Enter the manufacturerâs code (01454).
The indicator flashes three times and SET
turns off.
î
Operate the device
1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See âRemote Button Descriptionsâ for the functions of buttons for each device.
If the RM-VZ220 does not seem to be workingâŠ
îîCheck that you have set the correct manufacturerâs code.
îîTry repeating the setup procedure using another manufacturerâs code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see âSearching
for the correct codeâ).
Notes
îî
If the setting is incomplete,
the indicator flashes once SET
and the indicators turn off.
Start again from the
beginning.
îî
If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.
îî
To cancel the process, press
SET SET any time. The
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The indicator SET
lights up.
Searching for the correct code
You can set the manufacturerâs code using the Search function.
1 Power on the device with its power switch.
2 Aim the RM-VZ220 at the device you want to set.
3 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
4 Enter using the number buttons. 9 - 2 - 2
The indicator flashes three times.SET
5 Press and hold to start searching. îą
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the îĄ or î» button.
6 Press .
The indicator flashes three times and turns off.SET
7 Check if the code number works correctly (see âRemote Button
Descriptionsâ).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturerâs code you have set
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
2 Enter using the number buttons. 9 - 3 - 3
The indicator flashes three times.SET
3 Press .îą
4 When the indicator starts flashing, count the number of flashes. SET
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). â0â is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .îą
5 Press to finish.SET
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press , then release both buttons.SET
2 Enter using the number buttons. 9 - 7 - 7
The indicator flashes three times.SET
3 Press the desired Device Select button.
The indicator flashes three times and turns off.SET
To set the function again, perform the same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press , then release both buttons.SET
2 Enter using the number buttons. 9 - 0 - 0
The indicator flashes three times. SET
To cancel, press any button except .
3 Press .
The indicator flashes three times and turns off.SET
Remote Button Descriptions
General
î«îŹî
SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.
îî
Device Select buttons: Press to select the device to operate.
î°î
GUIDE: Displays the program guide (EPG).
î±î î
Źîî
î
Č//// : Moves the cursor to select a menu item/enters the selected item.
îłî
RETURN: Returns to the previous display/exits the menu.
î”î
VOL +/â: Turns the volume up/down.
îșî
POWER: Turns the selected device on and off.
îî
MUTING: Mutes the volume. Press again to turn muting off.
îî
SLEEP: Enables the Sleep function (when available).
The number , , and buttons each have a tactile dot for ease of use.5 CH+ îą
The and buttons do not work for a VCR.GUIDE RETURN
Note on the VOL+/â and MUTING buttons
When a TV or other video device is selected, the TVâs volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV
îźî
î
: VIDEO 1 input
: VIDEO 2 input
: HDMI input
î: RGB input
î»: (PIP INPUT) Changes the
input mode of the âwindowâ
picture.
îą: (PIP) Turns the âwindowâ
picture on and off.
îĄ: (PIP MOVE) Moves the
location of the âwindowâ picture.
îŹ: (PIP STILL) Freezes the
âwindowâ picture.
î: (PIP SWAP) Switches between
âmainâ and âwindowâ picture.
îŻî
A: Red button
B: Green button
C: Yellow button
D: Blue button
îČî
LIST: (CAPTION) Displays closed
captioning.
îŽî
MENU: Calls up the menu display.
î¶î
INPUT: Changes the input mode.
î·îžî 1 â 9, 0, ENTER ,î (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
î»î
PAGE +/â: (PIP CH +/â) Changes
the channel up/down in the
âwindowâ picture.
îŒî
FAVORITES: Enables the Favorite
function.
îœî
INFO: Displays program
information.
îŸî
OPTIONS: Displays the options
menu.
îżî
RECALL: Selects the channel
previously selected.
îî
CH +/â: Switches the channel up/
down.
Cable set top box/IPTV
îźî
î
: Proceeds to the previous
location.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Proceeds to the next location.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records.
îŹ: Pauses.
î: Stops.
îŻî
A, B, C buttons
D: (Live TV) Displays Master
Guide.
îČî
LIST: Displays the title of recorded
program.
îŽî
MENU: Calls up the menu display.
î¶î
INPUT: Changes the input mode.
î·îîž î , 1 â 9, 0, ENTER î (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
î»î
PAGE +/â: Page up/down
îŒî
FAVORITES: Enables the Favorite
function.
îœî
INFO: Displays program
information.
îŸî
OPTIONS: Displays the options
menu.
îżî
RECALL: Switches between the
current and previous channel.
îî
CH +/â: Switches the channel up/
down.
Satellite receiver
îźî
î
: Proceeds to the previous
location.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Proceeds to the next location.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records.
îŹ: Pauses.
î: Stops.
îŻî
A: Red button
B: Green button
C: Yellow button
D: Blue button
îČî
LIST: Displays the title of recorded
program/PVR menu.
îŽî
MENU: Calls up the menu display.
î¶î
INPUT: (TV/SAT) Switches the
output between SAT and TV.
î·îîž î , 1 â 9, 0, ENTER î (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).
î»î
PAGE +/â: Page up/down
îŒî
FAVORITES: Enables the Favorite
function.
îœî
INFO: Displays program
information.
îŸî
OPTIONS: Displays the Satellite
dish menu/Station Index.
îżî
RECALL: Tunes to the last tuned
station.
îî
CH +/â: Switches the channel up/
down.
VCR
îźî
î»: Rewinds.
îą: Plays.
îĄ: Fast forwards.
î: Records.
îŹ: Pauses.
î: Stops.
î¶î
INPUT: Changes the input mode.
î·î
1 â 9, 0: Number buttons
îčîîź: Ejects a tape.
îœî
INFO: (DISPLAY) Displays the
playback information.
îŸî
OPTIONS: (ANT/SW) Switches
the antenna output.
îżî
RECALL: (DRIVE SELECT) Selects
the deck.
îî
CH +/â: Switches the channel up/
down.
îî
ENTER: Enters the selected item.
DVD player/recorder
îźî
î
: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Skips to the next chapter/
track.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records (for DVD recorder).
îŹ: Pauses.
î: Stops.
îŻî
A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
îČî
LIST: Displays the Title List.
îŽî
MENU: Displays the DVD menu.
î¶î
INPUT: Changes the input mode.
î·î
1 â 9, 0: Number buttons
îžî
î (dot): (+10) Selects numbers 10
and above.
îčîîź: Opens/closes the disc tray.
î»î
PAGE +: (DVD) Selects the DVD
drive.
îPAGE â: (HDD) Selects the
internal HDD (hard disk drive).
îŒî
FAVORITES: (TOP MENU)
Displays the Top Menu.
îœî
INFO: (DISPLAY) Displays the
playback information.
îŸî
OPTIONS: Displays the options
menu.
îżî
RECALL: (DRIVE SELECT)
Switches between HDD and DVD.
îî
CH +/â: Switches the channel up/
down (for DVD recorder).
îî
ENTER: Enters the selected item.
Blu-ray Disc/HD-DVD player
îźî
î
: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Skips to the next chapter/
track.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records (for BD recorder).
îŹ: Pauses.
î: Stops.
îŻî
A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
îŽî
MENU: Displays the Pop-up Menu/
Disc Menu.
î¶î
INPUT: Changes the input mode.
î·î
1 â 9, 0: Number buttons
îžî
î (dot): (+10) Selects numbers 10
and above.
îčî
îź: Opens/closes the disc tray.
î»î
PAGE +: (BD) Selects the BD drive.
îPAGE â: (HDD) Selects the
internal HDD (hard disk drive).
îŒî
FAVORITES: (TOP MENU)
Displays the Top Menu.
îœî
INFO: (DISPLAY) Displays the
playback information.
îŸî
OPTIONS: Displays the options
menu.
îî
ENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)
îźî
î
: Proceeds to the previous
location.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Proceeds to the next location.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records.
îŹ: Pauses.
î: Stops.
îŻî
A: (REPLAY ) Enables the Replay *
function for DVR/Replay TV.
îB: (Live TV ) Displays Master *
Guide.
îČî
LIST: Displays the title of recorded
program.
îŽî
MENU: Calls up the menu display.
î¶î
INPUT: Changes the input mode.
î·î
1 â 9, 0: Number buttons
îžî
î (dot): (+10) Selects numbers 10
and above.
îčî
îź: Opens/closes the disc tray.
î»î
PAGE +/â: Page up/down,
Thumbs up/down*
îœî
INFO: (DISPLAY) Displays the
playback information.
îżî
RECALL: Selects the channel
previously selected.
îî
CH +/â: Switches the channel up/
down.
îî
ENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVD Home Theater
îźî
î
: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash â).
: Briefly fast forwards the
scene (Flash +).
î: Skips to the next chapter/
track.
î»: Fast reverses.
îą: Plays.
îĄ: Fast forwards.
î: Records.
îŹ: Pauses.
î: Stops.
îŻî
A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.
îČî
LIST: Enables the SOUND FIELD
function.
îŽî
MENU: Displays the DVD menu.
î¶î
INPUT: Changes the input mode.
î·î
1 â 9, 0: Number buttons
îžî
î (dot): (+10) Selects numbers 10
and above.
îčîîź: Opens/closes the disc tray.
îŒî
FAVORITES: (TOP MENU)
Displays the Top Menu.
îœî
INFO: (DISPLAY) Displays the
playback information.
îŸî
OPTIONS: Displays the amplifier
menu.
îżî
RECALL: (BAND) Selects FM/AM.
îî
CH +/â: Presets or tunes frequency
up/down.
îî
ENTER: Enters the selected item.
Notes on using the RM-VZ220
îî
The RM-VZ220 will not perform functions that the device is not designed for. For
example, if your TV does not have the muting function, on the RM-VZ220 MUTING
will not function with your TV.
îî
The function of the buttons varies depending on settings/operating modes. The table
of âRemote Button Descriptionsâ shows how the RM-VZ220 generally operates for
each device in the preset mode.
îî
If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVâs volume with the RM-VZ220.
Manufacturerâs Code List /
Lista de cĂłdigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
2 Enter the manufacturerâs code.
The indicator flashes three times and turns off.SET
Español
La siguiente tabla muestra los nombres de las marcas (Brand) y el nĂșmero
de cĂłdigo correspondiente (Code No.).
1 Presione y mantenga presionado el botĂłn durante mĂĄs de 3 segundos. SET
Se encenderĂĄ la luz indicadora . SET
Mientras tiene presionado el botĂłn , presione el botĂłn de selecciĂłn de SET
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el cĂłdigo del fabricante.
El indicador parpadearĂĄ tres veces y se apagarĂĄ.SET
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV / TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVD player / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVD recorder / Grabadora de DVD
Blu-ray Disc/HD-DVD player/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298
Español
Para los clientes de EE. UU.
ADVERTENCIA
Este equipo p2-ha sido probado y se p2-ha encontrado que cumple con los lĂmites para
dispositivos digitales de Clase B, de acuerdo con la Parte 15 de las normas de la FCC.
Estos lĂmites han sido diseñados para proporcionar una protecciĂłn razonable contra
interferencias perjudiciales en una instalaciĂłn residencial.
Este equipo genera, usa y puede emitir energĂa de radiofrecuencia y, si no se instala y
utiliza de acuerdo con las instrucciones, puede provocar interferencias perjudiciales en
las radiocomunicaciones. Sin embargo, no existe ninguna garantĂa de que tales
interferencias no se produzcan en una instalaciĂłn particular. Si este equipo llega a
producir interferencias dañinas en la recepción por radio o TV, lo que podrå
comprobarse encendiendo y apagando el aparato, se recomienda al usuario que intente
corregir la interferencia tocontrol remoto una o mĂĄs de las siguientes medidas:
îî
ReorientaciĂłn o reubicaciĂłn de la antena receptora.
îî
Aumento de la separaciĂłn entre el equipo y el receptor.
îî
ConexiĂłn del equipo a un tomacorriente diferente del utilizado por el receptor.
îî
Solicitud de ayuda al proveedor o a un técnico de radio/televisión experimentado.
Tenga en cuenta que cualquier cambio o modificaciĂłn que no se apruebe expresamente
en este manual puede anular su derecho a utilizar este equipo.
ConfiguraciĂłn del RM-VZ220
El RM-VZ220 estĂĄ configurado de fĂĄbrica para funcionar con los
dispositivos de video de la marca Sony en cualquiera de los botones de
selecciĂłn de dispositivos (consulte la tabla a continuaciĂłn).
Para usar los dispositivos que no sean marca Sony, o dispositivos marca Sony
que no vengan configurados de fĂĄbrica, establezca el cĂłdigo del fabricante de
cada dispositivo.
Dispositivos BotĂłn ConfiguraciĂłn de
fĂĄbrica*
TV TV Televisor Sony (00810)
TV, decodificador de cable,
receptor de satéllite, IPTV,
reproductor de DVD, grabadora
de DVD, reproductor de Blu-ray
Disc, DVR (videograbadora
digital), PVR (videograbadora
personal), VCR, DVD con cine en
casa
CBL (SAT) Decodificador de cable
(no de marca Sony)
(51376)
VCR VCR Sony (60032)
DVD Reproductor de DVD
Sony (11033)
* El cĂłdigo de cinco dĂgitos es el cĂłdigo establecido por el fabricante.
Nota
Solamente se puede asignar un TV al botĂłn de selecciĂłn de dispositivos del . Puede TV
asignar cualquier dispositivo a los otros botones de selecciĂłn de dispositivos.
InstalaciĂłn de las baterĂas
Abra el compartimiento de las baterĂas e inserte dos baterĂas tamaño AA
(R6) secas (no incluidas).
Inserte las baterĂas (primero el lado negativo) en el compartimiento tal como
se muestra abajo.
1 2
Vida Ăștil de la baterĂa
En condiciones normales, las baterĂas secas alcalinas AA (LR6) pueden
durar hasta un año. Si el RM-VZ220 no funciona apropiadamente, las
baterĂas pueden descargarse. Si ocurriera esto, reemplace ambas baterĂas con
un par nuevo.
Notas
îî
Reemplace las baterĂas por nuevas dentro de los dos minutos, y no presione ningĂșn
botĂłn mientras las reemplaza. De hacerlo, se pueden borrar las configuraciones de los
cĂłdigos.
îî
No usar una baterĂa vieja con una nueva, ni usar diferentes tipos de baterĂas juntos.
îî
Si se derraman los electrolitos contenidos dentro de la baterĂa, limpie el ĂĄrea
contaminada del compartimiento de las baterĂas con un paño y reemplace las baterĂas
viejas con nuevas. Para evitar los derrames de electrolitos, quite las baterĂas si tiene
planeado no utilizar el RM-VZ220 durante un perĂodo de tiempo prolongado.
Especificaciones
Distancia de operaciĂłn Aproximadamente 11 m (36 pies) (varĂa segĂșn los
dispositivos de los diferentes fabricantes)
Requisitos de alimentaciĂłn
Dos baterĂas secas de tamaño AA (R6) (no incluidas)
Vida Ăștil de la baterĂa Aproximadamente 1 año cuando se utilizan baterĂas alcalinas
de tamaño AA (LR6) (varĂa de acuerdo con la frecuencia del
uso de los botones, hasta un uso aproximado de 300 veces
por dĂa.)
Dimensiones Aproximadamente 53 Ă 213 Ă 27 mm
(2 1/8 Ă 8 1/2 Ă 1 1/8 pulgadas) (a Ă h Ă d)
Peso Aproximadamente 100 g (3,5 onzas) (sin incluir las baterĂas)
El diseño y las especificaciones estån sujetos a cambios sin previo aviso.
SoluciĂłn de problemas
Si tiene problemas con la configuraciĂłn o el funcionamiento del RM-VZ220:
îî
Realice con cuidado el procedimiento de configuraciĂłn de la âGuĂa de configuraciĂłnâ.
Si el RM-VZ220 no funciona, intente repetir el procedimiento de configuraciĂłn con
otro cĂłdigo de fabricante (si hay otros en la enumeraciĂłn de cĂłdigos de su
dispositivo). Si sigue sin poder operar el RM-VZ220, intente con la funciĂłn BĂșsqueda
(consulte âBĂșsqueda del cĂłdigo del fabricanteâ).
îî
Apunte el RM-VZ220 directamente al dispositivo.
îî
Quite cualquier obstĂĄculo en el camino entre el RM-VZ220 y el dispositivo.
îî
AsegĂșrese de haber presionado el botĂłn de selecciĂłn de dispositivo correcto.
îî
Controle que el dispositivo tenga capacidad para infrarrojo de control remoto. Por
ejemplo, si su dispositivo no incluĂa un control remoto, probablemente no sea capaz
de ser controlado por el RM-VZ220.
îî
Las baterĂas estĂĄn agotadas o no estĂĄn insertadas correctamente. ReemplĂĄcelas por
nuevas o insértelas correctamente.
Para clientes en EE. UU.
InformaciĂłn de asistencia al cliente
Luego de leer este manual, si todavĂa no puede lograr que el RM-VZ220 funcione
apropiadamente, llame a la LĂnea de ayuda de asistencia al cliente de Sony
al 1-800-822-2217.
GuĂa de configuraciĂłn
Esta guĂa muestra la configuraciĂłn y uso del RM-VZ220 para operar sus dispositivos.
Si su dispositivo Sony p2-ya p2-ha sido configurado, consulte âFuncionamiento del dispositivoâ.
Establezca el cĂłdigo del fabricante
Ejemplo: Para usar un televisor Philips
1 Encuentre el cĂłdigo del fabricante en la âLista de cĂłdigos del fabricanteâ.
e
e
Manufacturer âs Code List /
List a de cĂł digos del fa bricante
En g li s h
Th e following tables sh ow brand names ( ) and th eir corresponding Bran d
code numbers ( ).Cod e No.
1 Press and hold for more th an 3 seconds.SET
Th e indi cator ligh ts up.SET
Whi le keep ing h eld down, press the d esire d Device Sel ect button, SE T
th en releas e both butt ons.
2 Enter th e manufacturer âs code.
Th e indi cator flas hes thre e times and tur ns off.SET
Es p añ o l
La sigui ente tabla mues tra los nombres de las marcas ( ) y el nĂșmero Br and
de cĂłdigo correspondie nte ( ).Cod e No.
1 Presi one y mantenga pres ionado el botĂłn durante mĂĄs de 3 segundos.SET
Se encenderĂĄ l a luz indi cadora .SET
Mientr as tiene pr esionado el botĂłn , pr esione el botĂłn de sel ecciĂłn de SET
dis positivo deseado y luego suel te ambos botones.
2 Ingrese el cĂłdigo del fabri cante.
El indi cador par padearĂĄ tr es veces y se apagarĂĄ.SET
Br an d Cod e No .
Acer 01339
Action 00650
Admiral 00463
A kai 00812, 01675, 00702, 02232
Akir a 01733
AOC 01365, 01589
Apex Digital 00748
A ventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions 01447
Crosley 00054
Curtis 02352
Curtis M athes 00054, 00154, 00702, 01661
Daew oo 01661
Digital Li festyles 01765
Durabrand 00463, 00171
Dyn ex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emer son 01864, 00154, 00463, 00171,
01661, 01394
Em prex 01765
En vision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Har man/Kar don 00054
H isense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iL o 01684
Inf inity 00054
Insignia 01564, 00171, 02049
J BL 00054
J CB 00000
JVC 00731, 01253, 01601, 01774
K DS 01687
Kolin 01331
LG 01423, 02358
L XI 00054, 00154, 00156
M AG 01687
M agnavox 01454, 01866, 00054, 01254,
01365, 02372
Mar antz 00054
M atsushita 00650
M axent 01755
Memorex 00154, 00463, 00150
M GA 00150
Midland 00051
Br an d Cod e No .
Mitsubishi 01250, 00150, 00836
N AD 00156
NEC 01797
NetT V 01755
N orcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PAR K 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pi oneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Pr oscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R adioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sam po 01755
Sam sung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
T atung 01756
T CL 02403, 02429
Technic s 00051
Techwood 00051
Teknika 00054, 00150
Telef unken 00702
Toshiba 01524, 00154, 00156, 00650
T VS 00463
V enturer 01865
V ideocon 01540, 01541, 02436
Vidikron 00054
Vi ewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
T V / T V
Br an d Cod e No .
W ards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zen ith 00463, 01661
Br an d Cod e No .
A ccurian 10675
A kai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineV ision 10869
Citizen 10695
CyberHome 11024
Daew oo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emer son 10591, 10675
En terprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Har man/Kar don 11229
Hitachi 10573, 10664
H iteker 10672
Insignia 10675, 12428, 12596
Integr a 11769, 10627, 12147
JVC 10623, 10867, 11164
K enwood 10490
LG 10591, 10741, 10869
M agnavox 10503, 10539, 10646, 10675,
11354
Mar antz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
N AD 10741, 12572
Olevia 12331
On kyo 10503, 11769, 10627, 11627,
12147
Br an d Cod e No .
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pi oneer 10142, 10631, 11571, 12442
Polk Audio 10539
P residian 10675
Pr oscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Sam sung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
T CL 12587
Technic s 10490
T ivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
U rban Concepts 10503
Viore 12553
Vizio 12563
Vtr ek 12587
Xbox 10522, 12083
Yam aha 10490, 10539, 10497, 10817,
12298
Zen ith 10503, 10591, 10741, 10869
DV D p layer / R epr o duc to r de DVD
Br an d Cod e No .
A ccurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
M agnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Br an d Cod e No .
Pi oneer 10631
RCA 10522
Sam sung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zen ith 10741
DV D r eco r de r / G ra ba do ra de DV D
Blu- ra y Dis c/HD- DV D p laye r/
Re pr od uct o r d e B lu-r ay D isc/HD -D VD
Br an d Cod e No .
Denon 12258
Insignia 10675, 12428, 12596
Integr a 11769, 12147
LG 10741
M agnavox 10675
Mar antz 12414, 12432
Microsoft 12083
N AD 12572
Olevia 12331
On kyo 11769, 12147
Oppo 12545
Panasonic 11641
Br an d Cod e No .
Philips 12084, 12434
Pi oneer 10142, 12442
RCA 11769
Sam sung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yam aha 12298
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
TV / TV
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
El b d
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R di Sh k
Si su dispositivo no figura en la lista, intente con la funciĂłn BĂșsqueda (consulte âBĂșsqueda del
cĂłdigo del fabricanteâ).
2 Presione y mantenga presionado el
botĂłn durante mĂĄs de 3 segundos.SET
Se encenderĂĄ la luz indicadora .SET
Mientras tiene presionado el botĂłn
SET botĂłn de selecciĂłn , presione el
de dispositivo deseado y luego suelte
ambos botones.
3 Ingrese el cĂłdigo del fabricante (01454).
El indicador parpadearĂĄ tres veces y se SET
apagarĂĄ.
î
Funcionamiento del dispositivo
1 Apunte el RM-VZ220 directamente al dispositivo.
2 Presione el botĂłn de selecciĂłn de dispositivo
del dispositivo que desee hacer funcionar.
3 Presione POWER para encender el dispositivo.
4 Presione los botones en el RM-VZ220 para comprobar que funcionan.
Consulte âDescripciĂłn de los botones del control remotoâ para conocer las funciones de los botones para cada
dispositivo.
Si el RM-VZ220 parece no estar funcionandoâŠ
îîCompruebe que haya establecido el cĂłdigo del fabricante correcto.
îîIntente repetir el procedimiento de configuraciĂłn usando otro cĂłdigo de fabricante (si hay otros en la
enumeraciĂłn de cĂłdigos de su dispositivo).
Si sigue sin poder operar el RM-VZ220 después de probar todos los códigos de la lista, intente con la función
BĂșsqueda (consulte âBĂșsqueda del cĂłdigo del fabricanteâ).
Notas
îî
Si la configuraciĂłn estĂĄ
incompleta, el indicador SET
parpadearĂĄ una vez y los
indicadores se apagarĂĄn.
Vuelva a comenzar desde el
principio.
îî
Si no se realizan operaciones
en el transcurso de 10
segundos cuando se estĂĄ
realizando la configuraciĂłn, la
configuraciĂłn se cancelarĂĄ y
deberĂĄ volver a iniciarse.
îî
Para cancelar el proceso,
presione en cualquier SET
momento. El indicador se SET
apaga.
SET
POWER
Botones de
selecciĂłn
de
dispositivo
Botones
numéricos
Se encenderĂĄ la luz
indicadora .SET
BĂșsqueda del cĂłdigo del fabricante
Puede configurar el cĂłdigo del fabricante correcto usando la funciĂłn
BĂșsqueda.
1 Encienda el dispositivo con su botĂłn de encendido.
2 Apunte el RM-VZ220 al dispositivo que desea configurar.
3 Presione y mantenga presionado el botĂłn durante mĂĄs de 3 segundos. SET
Se encenderĂĄ la luz indicadora . SET
Mientras tiene presionado el botĂłn , presione el botĂłn de selecciĂłn de SET
dispositivo deseado y luego suelte ambos botones.
4 Ingrese usando los botones con nĂșmeros. 9 - 2 - 2
El indicador parpadea tres veces.SET
5 Presione y mantenga presionado para comenzar a buscar. îą
Cuando el dispositivo se apague suelte el botĂłn.
Si se pasa del cĂłdigo que necesita, puede buscar el cĂłdigo anterior o
siguiente con los botones îĄ o î».
6 Presione .
El indicador parpadearĂĄ tres veces y se apagarĂĄ.SET
7 Compruebe si el nĂșmero de cĂłdigo funciona correctamente (consulte
âDescripciĂłn de los botones del control remotoâ).
Si sigue sin poder operar el dispositivo, repita los pasos para buscar otro
cĂłdigo que funcione con la mayorĂa de las funciones de su dispositivo.
ComprobaciĂłn del cĂłdigo del fabricante que
configurĂł
1 Presione y mantenga presionado el botĂłn durante mĂĄs de 3 segundos. SET
Se encenderĂĄ la luz indicadora . SET
Mientras tiene presionado el botĂłn , presione el botĂłn de selecciĂłn de SET
dispositivo deseado y luego suelte ambos botones.
2 Ingrese usando los botones con nĂșmeros. 9 - 3 - 3
El indicador parpadea tres veces.SET
3 Presione .îą
4 Cuando el indicador comience a parpadear, cuente el nĂșmero de SET
parpadeos.
Los parpadeos cortos indican el dĂgito (primero, segundo, etc.), seguidos
de los parpadeos largos que indican el nĂșmero del dĂgito (p. ej., 2
parpadeos largos representan el nĂșmero 2). Los parpadeos rĂĄpidos
representan el â0â.
Determine de esta forma el nĂșmero de cĂłdigo de 5 dĂgitos. Para chequear
nuevamente, presione .îą
5 Presione para finalizar.SET
Para anular el control de encendido automĂĄtico
(solamente de los dispositivos Sony)
Los botones de selecciĂłn del dispositivo estĂĄn configurados para encender
un dispositivo en forma automĂĄtica cuando se presionan.
Para cancelar la funciĂłn:
1 Presione y mantenga presionado durante mĂĄs de 3 segundos. SET
Se encenderĂĄ la luz indicadora . SET
Mientras mantiene presionado , presione , luego suelte ambos SET
botones.
2 Ingrese usando los botones con nĂșmeros. 9 - 7 - 7
El indicador parpadea tres veces.SET
3 Presione el botĂłn de selecciĂłn de dispositivos que desea.
El indicador parpadearĂĄ tres veces y se apagarĂĄ.SET
Para volver a establecer la funciĂłn, siga el mismo procedimiento descrito
arriba.
RecuperaciĂłn de la configuraciĂłn de fĂĄbrica
Puede eliminar todas las configuraciones y restablecer la configuraciĂłn de
fĂĄbrica del RM-VZ220.
1 Presione y mantenga presionado durante mĂĄs de 3 segundos. SET
Se encenderĂĄ la luz indicadora . SET
Mientras mantiene presionado , presione , luego suelte ambos SET
botones.
2 Ingrese usando los botones con nĂșmeros. 9 - 0 - 0
El indicador parpadea tres veces. SET
Para cancelar presione cualquier botĂłn excepto .
3 Presione .
El indicador parpadearĂĄ tres veces y se apagarĂĄ.SET
Decodificador de cable/IPTV
îźî
î
: Va a la ubicaciĂłn anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va a la siguiente ubicaciĂłn.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba.
îŹ: Pausa.
î: Detiene.
îŻî
Botones A, B, C
D: (Live TV) Muestra la guĂa
maestra.
îČî
LIST: Muestra el tĂtulo del
programa grabado.
îŽî
MENU: Muestra el menĂș.
î¶î
INPUT: Cambia el modo de
entrada.
î·îîž î , 1 â 9, 0, ENTER î (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
î»î
PAGE +/â: Avanza/retrocede la
pĂĄgina.
îŒî
FAVORITES: Habilita la funciĂłn
Favorito.
îœî
INFO: Muestra informaciĂłn de
programaciĂłn.
îŸî
OPTIONS: Muestra el menĂș de
opciones.
îżî
RECALL: Cambia entre el canal
actual y el anterior.
îî
CH +/â: Cambia el canal hacia
arriba/abajo.
Receptor de satélite
îźî
î
: Va a la ubicaciĂłn anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va a la siguiente ubicaciĂłn.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba.
îŹ: Pausa.
î: Detiene.
îŻî
A: BotĂłn rojo
B: BotĂłn verde
C: BotĂłn amarillo
D: BotĂłn azul
îČî
LIST: Muestra el tĂtulo del
programa grabado/el menĂș PVR.
îŽî
MENU: Muestra el menĂș.
î¶î
INPUT: (TV/SAT) Cambia la salida
entre SAT y TV (cuando estĂĄ
conectado a un televisor).
î·îîž î , 1 â 9, 0, ENTER î (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
î»î
PAGE +/â: Avanza/retrocede la
pĂĄgina
îŒî
FAVORITES: Habilita la funciĂłn
Favorito.
îœî
INFO: Muestra informaciĂłn de
programaciĂłn.
îŸî
OPTIONS: Muestra el menĂș del
satĂ©lite/Ăndice de la estaciĂłn.
îżî
RECALL: Sintoniza la Ășltima
estaciĂłn sintonizada.
îî
CH +/â: Cambia el canal hacia
arriba/abajo.
VCR
îźî
î»: Rebobina.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba.
îŹ: Pausa.
î: Detiene.
î¶î
INPUT: Cambia el modo de
entrada.
î·î
1 â 9, 0: Botones numĂ©ricos
îčî
îź: Expulsa la cinta.
îœî
INFO: (MOSTRAR) Muestra la
informaciĂłn de reproducciĂłn.
îŸî
OPTIONS: (ANT/SW) Cambia la
salida de la antena.
îżî
RECALL: (SELECCIONAR LA
UNIDAD) Selecciona la casetera.
îî
CH +/â: Cambia el canal hacia
arriba/abajo.
îî
ENTER: Accede al elemento
seleccionado.
Reproductor/grabador de DVD
îźî
î
: Va al capĂtulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va al siguiente capĂtulo/pista.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba (para la grabadora de
DVD).
îŹ: Pausa.
î: Detiene.
îŻî
A: (CONFIGURACIĂN) Muestra
el menĂș del sistema/
configuraciĂłn.
B: (SUBTĂTULO) Cambia el
subtĂtulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuraciĂłn.
îČî
LIST: Muestra la lista de tĂtulos.
îŽî
MENU: Muestra el menĂș del DVD.
î¶î
INPUT: Cambia el modo de
entrada.
î·î
1 â 9, 0: Botones numĂ©ricos
îžî
î (punto): (+10) Selecciona los
nĂșmeros a partir del 10.
îčîîź: Abre/cierra la bandeja del disco.
î»î
PAGE +: (DVD) Selecciona la
unidad de DVD.
îPAGE â: (HDD) Selecciona el disco
duro interno.
îŒî
FAVORITES: (MENĂ PRINCIPAL)
Muestra el menĂș principal.
îœî
INFO: (MOSTRAR) Muestra la
informaciĂłn de reproducciĂłn.
îŸî
OPTIONS: Muestra el menĂș de
opciones.
îżî
RECALL: (SELECCIĂN DE LA
UNIDAD) Cambia entre HDD y
DVD.
îî
CH +/â: Cambia el canal hacia
arriba/abajo (para la grabadora de
DVD).
îî
ENTER: Accede al elemento
seleccionado.
DescripciĂłn de los botones del control
remoto
General
î«îŹîSET: Presione para configurar el RM-VZ220. El indicador se enciende o
parpadea durante la configuraciĂłn.
îî
Botones de selecciĂłn de dispositivo: Presione para seleccionar el
dispositivo para operar.
î°î
GUIDE: Muestra la guĂa de programaciĂłn (EPG).
î±î î
Źîî
î
Č//// : Mueve el cursor para seleccionar un elemento del menĂș. Accede
al elemento seleccionado.
îłî
RETURN: Vuelve a la visualizaciĂłn anterior/sale del menĂș.
î”î
VOL +/â: Sube/baja el volumen.
îșî
POWER: Enciende y apaga el dispositivo seleccionado.
îî
MUTING: Silencia el volumen. Presione nuevamente para silenciar el volumen.
îî
SLEEP: Habilita la funciĂłn Sleep (cuando estĂĄ disponible).
El nĂșmero , y el botĂłn tienen un punto tĂĄctil cada uno para facilitar el uso.5 CH+ îą
Los botones y no funcionan con un VCR.GUIDE RETURN
Nota sobre los botones VOL+/â y MUTING
Cuando se selecciona un TV u otro dispositivo de video, se controla el volumen del TV.
Cuando se selecciona un DVD con cine en casa, se puede controlar el volumen.
TV
îźî
î
: Entrada de VIDEO 1
: Entrada de VIDEO 2
: Entrada de HDMI
î: Entrada de RGB
î»: (ENTRADA PIP) Cambia la
entrada de la imagen de la
âventanaâ.
îą: (PIP) Enciende y apaga la
âventanaâ.
îĄ: (MOVER PIP) Mueve la
ubicaciĂłn de la imagen de la
âventanaâ.
îŹ: (PAUSAR PIP) Congela la
imagen de la âventanaâ.
î: (CAMBIAR PIP) Cambia entre
la imagen âprincipalâ y la âventanaâ.
îŻî
A: BotĂłn rojo
B: BotĂłn verde
C: BotĂłn amarillo
D: BotĂłn azul
îČî
LIST: (SUBTĂTULO) Muestra los
subtĂtulos.
îŽî
MENU: Muestra el menĂș.
î¶î
INPUT: Cambia el modo de
entrada.
î·îžî 1 â 9, 0, ENTER ,î (punto):
Cambia de canal. Por ejemplo, para
cambiar al canal 5, presione 0 y 5
(o presione 5 y ENTER).
î»î
PAGE +/â: (CANAL DE PIP +/â)
PIP CH Cambia el canal hacia
arriba/abajo en la imagen de la
âventanaâ.
îŒî
FAVORITES: Habilita la funciĂłn
Favorito.
îœî
INFO: Muestra informaciĂłn de
programaciĂłn.
îŸî
OPTIONS: Muestra el menĂș de
opciones.
îżî
RECALL: Selecciona el canal
seleccionado previamente.
îî
CH +/â: Cambia el canal hacia
arriba/abajo.
Reproductor de Blu-ray Disc/HD-DVD
îźî
î
: Va al capĂtulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va al siguiente capĂtulo/pista.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba (para grabadora de BD).
îŹ: Pausa.
î: Detiene.
îŻî
A: (CONFIGURACIĂN) Muestra
el menĂș del sistema/
configuraciĂłn.
B: (SUBTĂTULO) Cambia el
subtĂtulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuraciĂłn.
îŽî
MENU: Muestra el menĂș
emergente/menĂș del disco.
î¶î
INPUT: Cambia el modo de
entrada.
î·î
1 â 9, 0: Botones numĂ©ricos
îžî
î (punto): (+10) Selecciona los
nĂșmeros a partir del 10.
îčî
îź: Abre/cierra la bandeja del disco.
î»î
PAGE +: (BD) Selecciona la unidad
de BD.
îPAGE â: (HDD) Selecciona el disco
duro interno.
îŒî
FAVORITES: (MENĂ PRINCIPAL)
Muestra el menĂș principal.
îœî
INFO: (MOSTRAR) Muestra la
informaciĂłn de reproducciĂłn.
îŸî
OPTIONS: Muestra el menĂș de
opciones.
îî
ENTER: Accede al elemento
seleccionado.
DVR (videograbadora digital)/PVR (videograbadora personal)
îźî
î
: Va a la ubicaciĂłn anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va a la siguiente ubicaciĂłn.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba.
îŹ: Pausa.
î: Detiene.
îŻî
A: (VOLVER A REPRODUCIR ) *
Habilita la funciĂłn para volver a
reproducir para DVR/Replay
TV.
îB: (Live TV ) Muestra la guĂa *
maestra.
îČî
LIST: Muestra el tĂtulo del
programa grabado.
îŽî
MENU: Muestra el menĂș.
î¶î
INPUT: Cambia el modo de
entrada.
î·î
1 â 9, 0: Botones numĂ©ricos
îžî
î (punto): (+10) Selecciona los
nĂșmeros a partir del 10.
îčî
îź: Abre/cierra la bandeja del disco.
î»î
PAGE +/â: Avanza/retrocede la
pĂĄgina, Buscar arriba/abajo*
îœî
INFO: (MOSTRAR) Muestra la
informaciĂłn de reproducciĂłn.
îżî
RECALL: Selecciona el canal
seleccionado previamente.
îî
CH +/â: Cambia el canal hacia
arriba/abajo.
îî
ENTER: Accede al elemento
seleccionado.
* Estos botones corresponden al servicio
TiVo o al servicio Replay. Consulte su
manual de instrucciones para obtener
mĂĄs detalles.
DVD con cine en casa
îźî
î
: Va al capĂtulo/pista anterior.
: Muestra otra vez brevemente
la escena (Flash â).
: Avanza brevemente la escena
(Flash +).
î: Va al siguiente capĂtulo/pista.
î»: Rebobina rĂĄpidamente.
îą: Reproduce.
îĄ: Avanza rĂĄpidamente.
î: Graba.
îŹ: Pausa.
î: Detiene.
îŻî
A: (CONFIGURACIĂN) Muestra
el menĂș del sistema/
configuraciĂłn.
B: (SUBTĂTULO) Cambia el
subtĂtulo.
C: (AUDIO) Cambia el sonido.
D: (BORRAR) Borra la
configuraciĂłn.
îČî
LIST: Habilita la funciĂłn CAMPO
DE SONIDO.
îŽî
MENU: Muestra el menĂș del DVD.
î¶î
INPUT: Cambia el modo de
entrada.
î·î
1 â 9, 0: Botones numĂ©ricos
îžî
î (punto): (+10) Selecciona los
nĂșmeros a partir del 10.
îčî
îź: Abre/cierra la bandeja del disco.
îŒî
FAVORITES: (MENĂ PRINCIPAL)
Muestra el menĂș principal.
îœî
INFO: (MOSTRAR) Muestra la
informaciĂłn de reproducciĂłn.
îŸî
OPTIONS: Muestra el menĂș del
amplificador.
îżî
RECALL: (BANDA) Selecciona
FM/AM.
îî
CH +/â: Configura o sintoniza la
frecuencia hacia arriba/abajo.
îî
ENTER: Accede al elemento
seleccionado.
Notas sobre el uso del RM-VZ220
îîEl RM-VZ220 no puede realizar funciones que el dispositivo no estĂĄ diseñado para
realizar. Por ejemplo, si su TV no tiene una funciĂłn para silenciar el sonido, la funciĂłn
MUTING en el RM-VZ220 no funcionarĂĄ con su TV.
îîLa funciĂłn de los botones varĂa dependiendo de los modos de configuraciĂłn/
operaciĂłn. La tabla de âDescripciĂłn de los botones del control remotoâ muestra cĂłmo
el RM-VZ220 opera en general con cada dispositivo en el modo configurado.
îîSi el decodificador de cable puede controlar el volumen, asegĂșrese de establecerlo en
un nivel moderado. Si el volumen en el decodificador de cable se baja por completo,
no podrĂĄ ajustar el volumen de su TV con el RM-VZ220.
Cable set top box / Decodificador de cable
Brand Code No.
ADB 51927
Bright House 51376, 51877
Cable One 51376, 51877
Cablevision 51376, 51877, 51006
Charter 51376, 51877, 52187
Cisco 51877, 50877, 51982
Comcast 51376, 51877, 51982, 52576
Cox 51376, 51877
Digeo 51187, 52187
Director 50476
General
Instrument 50476
Insight 51376, 51877
Jerrold 50476
Knology 51877
Mediacom 51376, 51877
Brand Code No.
Motorola 51376, 50476, 51187, 51982
NET 50277
Pace 51877, 51982
Panasonic 51982
Philips 51305
Pioneer 51877, 50877
Rogers 51877
Scientific Atlanta 51877, 50877, 50277
Shaw 51376
Sony 51006
StarHub 51927
Suddenlink 51376, 51877
Time Warner 51376, 51877, 52187
Tivo 52576
US Electronics 50277
WideOpenWest 51877
IPTV / IPTV
Brand Code No.
AT&T 50858
Azteca 52237
BesTV 52327
Cisco 52345
Motorola 51998, 50858, 52275, 52378
Reliance 52452
Brand Code No.
Scientific Atlanta 50858, 52345
SingTel 51998, 52275
Thomson 52237
UTStarcom 52327
Verizon 52378
Satellite receiver / Receptor de satélite
Brand Code No.
Airtel 42248
Astro 42600
Bell ExpressVu 40775
DirecTV 41377, 40566, 40749, 40099,
41442
Dish Network 40775
Dishpro 40775
Echostar 40775, 42527
Expressvu 40775
GE 40566
GOI 40775
Hisense 41535
HTS 40775
Hughes Network
Systems 40749, 41442
iLo 41535
Indovision 40856
JVC 40775
Magnavox 40722
Mitsubishi 40749
Brand Code No.
Multichoice 42059, 42060
NET 41883
Net Brazil 41883
Pace 40887
Philips 40749, 40722, 40099, 41442
Proscan 40566
Proton 41535
RCA 40566
Samsung 41377, 41442
SKY 40856, 42619
SKY Brazil 40856, 40887, 41499
SKY Mexico 40856, 42619
Telefonica 42527
Tivo 41442
Toshiba 40749
Uniden 40722
US Digital 41535
USDTV 41535
Zenith 40856
DVR (digital video recorder)/PVR (personal video recorder)
DVR (videograbadora digital)/PVR (videograbadora personal)
Brand Code No.
DirecTV 20739
Go Video 20614
Hughes Network
Systems 20739
Humax 20739
Panasonic 20614, 20616
Philips 20739, 20618
Brand Code No.
ReplayTV 20614, 20616
Samsung 20739
Sonic Blue 20614, 20616
Sony 20636
Tivo 20739, 20618, 20636
Toshiba 21008
VCR / VCR
Brand Code No.
Admiral 60048
Aiwa 60037
Allegro 61137
American High 60035
Audiovox 60037
Calix 60037
Canon 60035
Carver 60081
CineVision 61137
Citizen 60037
Craig 60037
Curtis Mathes 60060, 60035, 60162
Daewoo 61137
Denon 60042
DirecTV 60739
Durabrand 60038
Electrohome 60037
Electrophonic 60037
Emerex 60032
Emerson 60037, 60043
ESA 61137
Fuji 60035, 60033
GE 60060, 60035
Go Video 60614, 61137
GoldStar 60037, 60038, 61137
Gradiente 61137
Harman/Kardon 60081, 60038
Hitachi 60042
Hughes Network
Systems 60739, 60042
Humax 60739
Instant Replay 60035
JVC 60067
KEC 60037
Kenwood 60067, 60038
Kodak 60035, 60037
LG 61137
LXI 60037
Magnavox 60035, 60081
Marantz 60035, 60081
Marta 60037
Matsushita 60035, 60162
MEI 60035
Memorex 60035, 60162, 60037, 60048
MGA 60043
Minolta 60042
Mitsubishi 60067, 60043
Brand Code No.
Motorola 60035, 60048
NEC 60067, 60038
Nikko 60037
Olympus 60035
Optimus 61062, 60162, 60037, 60048
Panasonic 61062, 60035, 60162, 60614,
60616, 61562
Penney 60035, 60037, 60042, 60038
Pentax 60042
Philco 60035
Philips 60739, 60035, 60081, 60618
Pilot 60037
Pioneer 60067
Polk Audio 60081
Proscan 60060
Quasar 60035, 60162
Radix 60037
Randex 60037
RCA 60060, 60042
Realistic 60035, 60037, 60048
ReplayTV 60614, 60616
Rio 61137
Samsung 60739
Sanky 60048
Sansui 60067
Scott 60043
Sears 60035, 60037, 60042
Sensory Science 61155
Sharp 60048
Sonic Blue 60614, 60616, 61137
Sony 60032, 60033, 60636
STS 60042
Sylvania 60035, 60081, 60043
Tashiko 60037
Technics 60035, 60162
Teknika 60035, 60037
Tivo 60739, 60618, 60636
Toshiba 60043, 61008
Totevision 60037
Vector Research 60038
Videomagic 60037
Wards 60060, 60035, 60048, 60081,
60042
XR-1000 60035
Yamaha 60038
Zenith 60033, 61137
DVD Home Theater / DVD con cine en casa
Brand Code No.
Anam 31609
Bose 31229, 31629, 31933
Denon 32857
Harman/Kardon 31306
HitPlus 32483
Insignia 31751, 32175
Integra 31298
JBL 31306
JVC 31374, 32239, 32331
LG 31293, 32197, 32284
Magnavox 31514
NexxTech 31751
Norcent 31751
Brand Code No.
Onida 32482
Onkyo 31298, 31531
Panasonic 31288, 31548, 31633, 31763,
31764, 32452, 32967
Philco 31838
Philips 31266, 32311, 32459
Pioneer 31935
RCA 31609, 32041, 32426
Samsung 31295, 31500, 31868
Sony 31622, 31558, 31658, 31758,
31822, 31858, 32522
Vtrek 32426, 32483
Zenith 31293
Produktspezifikationen
Marke: | Sony |
Kategorie: | Afstandsbediening |
Modell: | RM-VZ220 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sony RM-VZ220 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Afstandsbediening Sony
16 September 2024
14 September 2024
9 September 2024
4 September 2024
1 September 2024
14 August 2024
8 August 2024
4 August 2024
3 August 2024
28 Juli 2024
Bedienungsanleitung Afstandsbediening
- Afstandsbediening Exibel
- Afstandsbediening Hama
- Afstandsbediening Kensington
- Afstandsbediening LogiLink
- Afstandsbediening Logitech
- Afstandsbediening Medion
- Afstandsbediening Nedis
- Afstandsbediening Philips
- Afstandsbediening SilverCrest
- Afstandsbediening Sweex
- Afstandsbediening T'nB
- Afstandsbediening Targus
- Afstandsbediening Trust
- Afstandsbediening Watson
- Afstandsbediening Zalman
- Afstandsbediening Panasonic
- Afstandsbediening Clas Ohlson
- Afstandsbediening Cotech
- Afstandsbediening AEG
- Afstandsbediening Miele
- Afstandsbediening Canon
- Afstandsbediening Velleman
- Afstandsbediening Neumann
- Afstandsbediening CSL
- Afstandsbediening Devolo
- Afstandsbediening Schwaiger
- Afstandsbediening König
- Afstandsbediening Thomson
- Afstandsbediening Kenwood
- Afstandsbediening Bang And Olufsen
- Afstandsbediening Bose
- Afstandsbediening Pioneer
- Afstandsbediening Geemarc
- Afstandsbediening Heitech
- Afstandsbediening JVC
- Afstandsbediening Meliconi
- Afstandsbediening Motorola
- Afstandsbediening One For All
- Afstandsbediening Technics
- Afstandsbediening Vivanco
- Afstandsbediening Abus
- Afstandsbediening Ferguson
- Afstandsbediening Hannspree
- Afstandsbediening Strong
- Afstandsbediening Tascam
- Afstandsbediening Nexa
- Afstandsbediening Lifetec
- Afstandsbediening Lindy
- Afstandsbediening Waeco
- Afstandsbediening Tripp Lite
- Afstandsbediening Ansmann
- Afstandsbediening Marmitek
- Afstandsbediening Naim
- Afstandsbediening Scosche
- Afstandsbediening Honeywell
- Afstandsbediening DJI
- Afstandsbediening Reely
- Afstandsbediening Edision
- Afstandsbediening Humax
- Afstandsbediening Kathrein
- Afstandsbediening Metronic
- Afstandsbediening Skymaster
- Afstandsbediening Smart
- Afstandsbediening Alpine
- Afstandsbediening NAD
- Afstandsbediening Adj
- Afstandsbediening CGV
- Afstandsbediening Ebode
- Afstandsbediening Ruwido
- Afstandsbediening Vogel's
- Afstandsbediening Zapman
- Afstandsbediening SilverStone
- Afstandsbediening Vision
- Afstandsbediening Xavax
- Afstandsbediening Hager
- Afstandsbediening Marantz
- Afstandsbediening Ecler
- Afstandsbediening Monacor
- Afstandsbediening Rockford Fosgate
- Afstandsbediening Milwaukee
- Afstandsbediening Chamberlain
- Afstandsbediening Packard Bell
- Afstandsbediening JUNG
- Afstandsbediening Aplic
- Afstandsbediening Innr
- Afstandsbediening Ranex
- Afstandsbediening Ei Electronics
- Afstandsbediening Omega
- Afstandsbediening Optex
- Afstandsbediening Revox
- Afstandsbediening Clarion
- Afstandsbediening Energy Sistem
- Afstandsbediening Audiovox
- Afstandsbediening TomTom
- Afstandsbediening HQ
- Afstandsbediening Amazon
- Afstandsbediening Reflecta
- Afstandsbediening DataVideo
- Afstandsbediening Manfrotto
- Afstandsbediening Cisco
- Afstandsbediening Danfoss
- Afstandsbediening Delta Dore
- Afstandsbediening Intertechno
- Afstandsbediening Engel Axil
- Afstandsbediening BENNING
- Afstandsbediening Aeon Labs
- Afstandsbediening Vaddio
- Afstandsbediening Hikvision
- Afstandsbediening Jensen
- Afstandsbediening JL Audio
- Afstandsbediening HĂ€hnel
- Afstandsbediening PDP
- Afstandsbediening Viper
- Afstandsbediening Homematic IP
- Afstandsbediening EQ3
- Afstandsbediening Nanlite
- Afstandsbediening Emtec
- Afstandsbediening ESYLUX
- Afstandsbediening Furman
- Afstandsbediening Fusion
- Afstandsbediening Glashart Media
- Afstandsbediening Jasco
- Afstandsbediening Jolly
- Afstandsbediening KlikaanKlikuit
- Afstandsbediening KPN
- Afstandsbediening Maximex
- Afstandsbediening Nemef
- Afstandsbediening OEM
- Afstandsbediening Online
- Afstandsbediening Prolectrix
- Afstandsbediening Provision ISR
- Afstandsbediening Q-Sonic
- Afstandsbediening Remotec
- Afstandsbediening Revo
- Afstandsbediening Schaudt
- Afstandsbediening Steren
- Afstandsbediening Sunwave
- Afstandsbediening Tevion (Medion)
- Afstandsbediening Tihao
- Afstandsbediening AMX
- Afstandsbediening TV Vlaanderen
- Afstandsbediening Uni-T
- Afstandsbediening Unitron
- Afstandsbediening Universal Electronics
- Afstandsbediening Universal Remote Control
- Afstandsbediening VDO Dayton
- Afstandsbediening Verizon
- Afstandsbediening Vizio
- Afstandsbediening Voxx
- Afstandsbediening Walkera
- Afstandsbediening Ziggo
- Afstandsbediening Vimar
- Afstandsbediening Siig
- Afstandsbediening Antec
- Afstandsbediening Sonoff
- Afstandsbediening AudioControl
- Afstandsbediening RGBlink
- Afstandsbediening Iogear
- Afstandsbediening Fortin
- Afstandsbediening Simplify
- Afstandsbediening Profoto
- Afstandsbediening Metra
- Afstandsbediening Mosconi
- Afstandsbediening Vello
- Afstandsbediening Tiq
- Afstandsbediening Magnus
- Afstandsbediening H-Tronic
- Afstandsbediening Bang Olufsen
- Afstandsbediening SVS
- Afstandsbediening Axis
- Afstandsbediening Natec
- Afstandsbediening Wet Sounds
- Afstandsbediening Aputure
- Afstandsbediening Libec
- Afstandsbediening Malmbergs
- Afstandsbediening Wentronic
- Afstandsbediening Neets
- Afstandsbediening Crestron
- Afstandsbediening Antelope Audio
- Afstandsbediening ORNO
- Afstandsbediening Extron
- Afstandsbediening Valueline
- Afstandsbediening Artsound
- Afstandsbediening Bigben Interactive
- Afstandsbediening Satechi
- Afstandsbediening DSC
- Afstandsbediening Memphis Audio
- Afstandsbediening Beoplay
- Afstandsbediening Swiss Sense
- Afstandsbediening GBS Elettronica
- Afstandsbediening Gewiss
- Afstandsbediening Lutron
- Afstandsbediening Control4
- Afstandsbediening Xit
- Afstandsbediening ETiger
- Afstandsbediening TELE System
- Afstandsbediening Multibrackets
- Afstandsbediening Nanoleaf
- Afstandsbediening Elbe
- Afstandsbediening MIOPS
- Afstandsbediening Compustar
- Afstandsbediening Ridem
Neueste Bedienungsanleitung fĂŒr -Kategorien-
5 Oktober 2024
5 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024