Smeg MDF50SS Bedienungsanleitung

Smeg Wasserhahn MDF50SS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Smeg MDF50SS (1 Seiten) in der Kategorie Wasserhahn. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Freque

FrequeFrequently Ask

ntly Ask

ntly Askntly Asked Q

ed Q

ed Qed Questions

uestions

uestionsuestions

Rev. 00 - 29/07/2020

Mixer type Possible causes Solution

Revolving / Pull-out

Drip from the clos

control aerator

Cartridge damaged (by micro

debris and impurities in the

water)

• Replacement of the mixing cartridge

Tips for preserving the cartridge: -

Installation of filter valves under the sink (if

they are not present) - Periodic filter

cleaning

Revolving / Pull-out

Visible leakage under

the control knob

Cartridge damaged (by micro

debris and impurities in the

water)

• Replacement of the mixing cartridge

Tips for preserving the cartridge: -

Installation of filter valves under the sink (if

they are not present) - Periodic filter

cleaning

Revolving

Visible leakage in the

spout rotation area

Wear and tear of the seals

due to wear and tear (from

daily use), impurities in the

water, limescale and

incorrect maintenance

Seal replacement using sealing kit

Revolving / Pull-out Reduced flow rate

Thick dirt on the filters

and/or in the aerator

Incorrect installation of the

supply hoses

1 - Inspection and cleaning of the

filter/aerator

2 - Check that the hoses are not

bent/twisted

3 - Clean the filters under the sink

Pull-out Reduced flow rate Spray head and check valve

In addition to the checks in the previous

point, please also check the check valve

in the spray head, if any

Pull-out

Spraying from both

spray head nozzles

Internal components and

seals damaged by impurities

Spray head replacement

Pull-out

The spray head is

barely pulled out of its

seat

The hand shower

hardly gets back into

position

Wrong installation of the

counterweight

Check the correct position of the

counterweight along the hose of the

pull-out spray head (and lubricate the

seal on the spray head shank if

necessary)

Revolving / Pull-out

The mixer is not stable

on the sink surface

Wrong installation

Check the correct tightening of the

fixing kit and evaluate the possible use

of the triangular support

Problem

The notes indicated in the table are intended to supplement the

Product Warranty

, which should be read in order to ensure correct installation, use and

maintenance of the product itself

Produktspezifikationen

Marke:	Smeg
Kategorie:	Wasserhahn
Modell:	MDF50SS
Produktfarbe:	Chrome, Stainless steel
Befestigungstyp:	Deck
Maximaler Betriebsdruck:	5 bar
Thermostat:	Nein
Schwenkbar:	Ja
Swivel Winkel:	360 °
Kartuschentyp:	Keramik
Schlauch enthalten:	Ja
Material Wasserhahn:	Messing
Wasserdurchflusskontrolle:	Hebelgriffe
Anzahl Ventile/Hebel:	Einzelbild
Ausgussform:	Typ C
Kartuschendurchmesser:	25 mm
Schlauchanschlussgewinde:	G3/8
Durchmesser Einbettungsloch:	35 mm
Belüftungsvorrichtung:	Ja
Stärke (max.) einbettende Oberfläche:	40 mm
Höhe über der einbettenden Oberfläche (max.):	482 mm
Abstand von Eingang Schlauch bis Ausgang Stutzen:	230 mm
Abstand von Auslass Stutzen bis einbettende Oberfläche:	207 mm
Anzahl der enthaltenen Schläuche:	2 Stück(e)