Reloop Flux Bedienungsanleitung

Reloop DJ Ausrüstung Flux

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Reloop Flux (28 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/28
English 02-07 ...............................................................
Deutsch 08-13 .............................................................
Français 14-19 .............................................................
Español 20-25 ..............................................................
WARNING!
To prevent re or avoid an electric shock
do not expose the device to water or uids!
Never open the housing!
WARNUNG!
Um Feuer oder einen elektrischen Schock zu
vermeiden, setzen Sie dieses Gerät nicht Wasser
oder Flüssigkeiten aus! Öffnen Sie niemals das
Gehäuse!
ATTENTION !
An d‘éviter un incendie ou une décharge
électrique, veillez à tenir cet appareil à l‘écart
des liquides et de l‘humidité ! N´ouvrez jamais le
boîtier !
¡ADVERTENCIA!
Para evitar incendios o descargas eléctricas, ¡no
sumerja este equipo en agua u otras sustancias
líquidas! ¡Nunca abra la carcasa!
Keep information for further reference!
Für weiteren Gebrauch aufbewahren!
Gardez ces instructions pour des utilisations
ultérieurs!
¡Conservar para su uso posterior!
www.reloop.com
Reloop Trademark
Global Distribution GmbH & Co. KG
Schuckertstr. 28
48153 Muenster / Germany
© 2023
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D‘EMPLOI
MANUAL DE INSTRUCCIONES
REV. 1.1
ENGLISH
2
ATTENTION! For your own safety, please read this operation manual carefully before the initial operation! All
persons involved in the installation, setting-up, operation, maintenance and service of this device must be
appropriately qualied and observe this operation manual in detail. This product complies with the requirements
of the applicable European and national regulations. Conformity has been proven. The respective statements and
documents are deposited at the manufacturer.
Before operating this equipment we ask you to carefully study and observe all instructions. Please remove the FLUX
from its packaging. Check before an initial operation to make sure that the device has not been visibly damaged during
transport. If you detect any damage to the USB cable or the casing, do not operate the device. Contact your specialized
dealer.
SAFETY INSTRUCTIONS
CAUTION! Please exercise particular caution when handling power voltage. This voltage rating may lead to a
critical electrical shock! Any damage caused by the non-observance of this operation manual excludes any
warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused by
improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user
must observe the safety instructions and warnings contained in this operation manual.
- For reasons of safety and certication (CE) the unauthorized conversion and/or modication of the device is prohibited.
Please note that in the event of damage caused by the manual modication to this device, any warranty claims are
excluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of worn parts that can be
exchanged from the outside. Qualied staff must carry out maintenance, otherwise, the warranty does not apply!
- Ensure that the power will only be supplied after the device has been fully set up. Always plug in the USB plug last.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and correctly hooked
up. Refer to your dealer if you have any questions.
- Ensure that when setting up the product the USB cable is not squashed or damaged by sharp edges.
- Disconnect the device when not in use and before cleaning! Be sure to hold the USB plug by the body. Never pull the USB cord!
- Position the device on a horizontal and stable base.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and
dust. Be sure that no cables lie around openly. You will endanger your own safety and that of others!
- Do not rest any containers lled with liquid that could easily spill onto the device or its immediate vicinity. If, however,
uids should access the inside of the device, immediately disconnect the USB plug. Have the device checked by a
qualied service technician before reuse. Damage caused by uids inside the device is excluded from the warranty.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the
device away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in
a closed vehicle). Never cover the cooling fan or vents. Always ensure sufcient ventilation.
- The device must not be operated after being taken from a cold environment into a warm environment. The
condensation caused at this moment may destroy your device. Do not switch on or operate the device until it has
reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only
be cleaned with a damp cloth. Never use solvents or cleaning uids with a petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- At commercial facilities, the regulations for the prevention of accidents as stipulated by the organization of professional
associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with
responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or problems.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- This device is a professional USB-C DVS interface. The FLUX interface converts the control signal coming from
each deck into digital audio, to be sent via USB to the Serato DJ software, which decodes that signal into a stream
of information based on what the DJ is doing with the control disc. A virtual “deck” replicates the movements of the
control disc. Audio les loaded onto the virtual decks are then played back through the outputs of the hardware, with
any manipulation of the control disc reproduced on the audio, effectively emulating vinyl control of the les loaded
into the software.
- If the device is used for other purposes than those described in the operation manual, damage can be caused to the
product, leading to the exclusion of warranty rights. Moreover, any other application that does not comply with the
specied purpose harbors risks such as short circuits, res, electrical shocks, etc.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the USB cable or the casing, as well as for wear out
of wear parts such as buttons and switches.
- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnected and secured
against accidental use. Always disconnect the USB cable from the outlet!
- Disconnect the USB cable from your computer.
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer
functions, following longer storage under unfavorable conditions or after major transport stress.
3
ENGLISH
CONTROLS
FRONT
REAR
DESCRIPTION
1. Output Status LED (Deck 1 - Deck 3)
2. Input Status LED (Deck 1 - Deck 3)
3. Thru Button (Deck 1 / Deck 2)
4. Thru Button Status LED (Deck 1 / Deck 2)
5. USB-Hub Status LED
6. PD Status LED (Power Delivery)
7. USB/DC Status LED
8. Output RCA (Deck 1 - Deck 3/AUX)
9. Active USB Hub (x2)
10. USB-C PD (Power Delivery)
11. USB-C DC In
12. Input RCA (Deck 1 - Deck 3/AUX)
13. Earth Terminal
14. Phono/Line Source Switches
1 1 1
33
5 6 7
4
4
2 2 2
12 12 12 13 14
8 8 891011

Produktspezifikationen

Marke: Reloop
Kategorie: DJ Ausrüstung
Modell: Flux

Brauchst du Hilfe?

Wenn Sie Hilfe mit Reloop Flux benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung DJ Ausrüstung Reloop

Reloop

Reloop Mixtour Pro Bedienungsanleitung

5 September 2024
Reloop

Reloop Flux Bedienungsanleitung

10 August 2024
Reloop

Reloop Mixtour Bedienungsanleitung

6 August 2024
Reloop

Reloop BeatMix 2 Bedienungsanleitung

5 August 2024
Reloop

Reloop Touch Bedienungsanleitung

1 August 2024
Reloop

Reloop RMX-95 Bedienungsanleitung

31 Juli 2024
Reloop

Reloop Terminal Mix 8 Bedienungsanleitung

14 Juli 2024
Reloop

Reloop RMX INNOFADER Bedienungsanleitung

13 Juli 2024
Reloop

Reloop NEON Bedienungsanleitung

7 Juli 2024
Reloop

Reloop Cartridge King Bedienungsanleitung

6 Juli 2024

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-

Line 6

Line 6 HX Effects Bedienungsanleitung

15 Oktober 2024
Korg

Korg DT-10 Bedienungsanleitung

8 Oktober 2024
Tascam

Tascam XS-3 Bedienungsanleitung

2 Oktober 2024
Audio-Technica

Audio-Technica AT-VM95EN Bedienungsanleitung

29 September 2024
Behringer

Behringer CMD DC-1 Bedienungsanleitung

28 September 2024
Korg

Korg OT-120 Bedienungsanleitung

27 September 2024
Korg

Korg DTR-2000 Bedienungsanleitung

26 September 2024
Festo

Festo CPX-E-CEC-M1 Bedienungsanleitung

24 September 2024
BeamZ

BeamZ StarFuzer Bedienungsanleitung

24 September 2024
Focusrite

Focusrite Clarett 4Pre USB Bedienungsanleitung

23 September 2024