Reloop Touch Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Reloop Touch (60 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/60
INSTRUCTION MANUAL
CAUTION!
For your own safety, please read this operation manual carefully before initial operation!
All persons involved in the installation, setting-up, operation, maintenance and service
of this device must be appropriately qualied and observe this operation manual in de-
tail. This product complies with the requirements of the applicable European and natio-
nal regulations. Conformity has been proven. The respective statements and documents
are deposited at the manufacturer.
BEDIENUNGSANLEITUNG
ACHTUNG!
Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungs-
anleitung sorgfältig durch! Alle Personen, die mit der Aufstellung, Inbetriebnahme,
Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen ent-
sprechend qualiziert sein und diese Betriebsanleitung genau beachten. Dieses Produkt
erfüllt die Anforderungen der geltenden europäischen und nationalen Richtlinien, die
Konformität wurde nachgewiesen, die entsprechenden Erklärungen und Unterlagen
sind beim Hersteller hinterlegt.
MODE DEMPLOI
ATTENTION!
Pour votre propre sécurité, veuillez lire attentivement ce mode d‘emploi avant la premi-
ère utilisation ! Toutes les personnes chares de l‘installation, de la mise en service,
de l‘utilisation, de l‘entretien et la maintenance de cet appareil doivent posséder les
qualications nécessaires et respecter les instructions de ce mode demploi. Ce produit
est conforme aux directives européennes et nationales, la conformi a été certiée et
les déclarations et documents sont en possession du fabricant.
MANUAL DE INSTRUCCIONES
¡ATENCIÓN!
En aras de su propia seguridad, ¡lea detenidamente este manual de instrucciones antes
de la primera puesta en marcha! Todas las personas relacionadas con el montaje, la
puesta en marcha, la operación, el mantenimiento y la reparación de este equipo deben
estar correctamente cualicadas y haber leído con atención este manual de instruccio-
nes. Este producto cumple con los requisitos de las directivas europeas y nacionales, se
ha comprobado la conformidad y las declaraciones y los documentos correspondientes
están en posesión del fabricante.
English . . . . . . . . . . . . . . . . . . . . . . . . 02 - 15
Deutsch . . . . . . . . . . . . . . . . . . . . . . . 16 - 29
Français . . . . . . . . . . . . . . . . . . . . . . . 30 - 43
Español. . . . . . . . . . . . . . . . . . . . . . . . 44 - 57
Technical Data . . . . . . . . . . . . . . . . . . . . . 58
CAUTION!
For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, maintenance and
service of this device must be appropriately qualied and follow this operation manual in detail. This product complies with the requirements of the applicable European
and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.
INDEX
Before operating this equipment we ask you to carefully study and follow all instructions.
Please remove the Reloop TOUCH from its packaging. Before initial operation please make sure that the device has not been visibly damaged during transport.
If you detect any damage to the power cable or the casing, do not operate the device and contact your specialized dealer.
SAFETY INSTRUCTIONS
CAUTION!
Please exercise particular caution when handling AC 100 - 240 V, 60/50Hz power voltage. This voltage rating may lead to a critical electrical shock! Any damage caused
by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused
by improper handling or non-observance of the safety instructions.
1. This device has left the factory in perfect condition. To maintain this condition and to
ensure a risk-free operation the user must observe the safety instructions and warnings
contained in this operation manual.
2. For reasons of safety and certication (CE) the unauthorized conversion and/or modi-
cation of the device is prohibited. Please note that in the event of damage caused by
the manual modication to this device any warranty claims are excluded.
3. The inside of the device does not contain any parts which require maintenance, with
the exception of wear parts that can be exchanged from the outside. Only qualied staff
must carry out maintenance, otherwise warranty does not apply!
4. The fuse must exclusively be exchanged against fuses of the same class, with the same
trigger features and nominal current rating.
5. Make sure that the power will only be supplied after the device has been fully set up.
Always plug in the mains plug last. Ensure that the mains switch is in the “OFF” position
when connecting the device to power.
6. Only use cables that comply with regulations. Make sure that all jacks and bushes are
tightened and correctly hooked up. Refer to your dealer if you have any questions.
7. Ensure that when setting up the product the mains cable is not squashed or damaged
by sharp edges.
8. Prevent the mains cable from coming into contact with other cables! Exercise great care
when handling mains cables and connections. Never touch these parts with wet hands!
9. Connect the power cable exclusively to appropriate shock-proof outlets. The only supply
point to be used is a supply outlet in accordance with specications of the public supply
network.
10. Disconnect the device from the supply outlet when not in use and before cleaning! Be
sure to hold the mains plug by the body. Never pull the mains cord!
11. Position the device on a horizontal and stable low-ame base.
12. Avoid any concussions or violent impact when installing or operating the device.
13. When selecting the location of installation make sure that the device is not exposed to
excessive heat, humidity, and dust. Be sure that no cables lie around openly. You will
endanger your own safety and that of others!
14. Do not rest any containers lled with liquid that could easily spill onto the device or in its
immediate vicinity. If, however, uids should access the inside of the device, immediate-
ly disconnect the mains plug. Have the device checked by a qualied service technician
before re-use. Damage caused by uids inside the device is excluded from the warranty.
15. Do not operate the device under extremely hot (in excess of 35° C) or extremely cold
(below 5° C) conditions. Keep the device away from direct exposure to the sun and heat
sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never
cover the cooling fan or vents. Always ensure sufcient ventilation.
16. The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch
on or operate the device until it has reached ambient temperature!
17. Controls and switches should never be treated with spray-on cleaning agents and lu-
bricants. This device should only be cleaned with a damp cloth. Never use solvents or
cleaning uids with a petroleum base for cleaning.
18. When relocating, the device should be transported in its original packaging.
19. Devices supplied by voltage should not be left in the hands of children. Please exercise
particular care when in the presence of children.
20. At commercial facilities the regulations for the prevention of accidents as stipulated by
the organization of professional associations must be observed.
21. At schools, training facilities, hobby and self-help workshops the operation of the device
must be monitored with responsibility by trained staff.
22. Keep this operation manual in a safe place for later reference in the event of questions
or problems.
SAFETY INSTRUCTIONS 2 ..............................................
APPLICATION IN ACCORDANCE WITH REGULATIONS 3
MAINTENANCE 3 ...........................................................
SCOPE OF DELIVERY 3 ..................................................
SETUP AND CONNECTIONS 3 ........................................
INSTALLATION 3 ............................................................
FEATURES 4 ...................................................................
DECK VIEWS 6 ...............................................................
2 DECKS 6 ......................................................................
VIDEO & VIDEO FULL 6 .....................................................
4 DECKS & 4 DECKS SWAP 7 ...........................................
DECK VIEW ELEMENTS 7 ...............................................
DECK INFO 7 ...................................................................
EFFECTS 8 .....................................................................
VIDEO EFFECT AND TRANSITION ON MASTER 8 ................
DECK EFFECTS 8 .............................................................
SINGLE FX MODE 9 ..........................................................
MULTI FX MODE 9 ............................................................
XY PAD EFFECT VIEW 9 ....................................................
PADS 10 ...........................................................................
WAVES 10 ........................................................................
RHYTHM WAVE VIEW .....................................................10
VIDEO 10 ..........................................................................
BROWSER VIEW..........................................................11
BROWSER VIEW WITH MINI DECKS ................................11
MINI DECKS 11 ..................................................................
FOLDERS LIST 12 ..............................................................
FILES LIST 12 ....................................................................
BROWSER VIEW - WINDOWS ON SCREEN KEYBOARD 12 .....
SIDEVIEW 13 .....................................................................
SETTINGS VIEW 13 ..........................................................
DECK SETTINGS............................................................14
BROWSER SETTINGS 14 ....................................................
WAVES SETTINGS 14 .........................................................
TOUCH DISPLAY SETTINGS 15 .......................................
ON SCREEN KEYBOARD (WINDOWS 10) 15 .........................
MINIMUM SYSTEM REQUIREMENTS 15 ..........................
MAC: ............................................................................15
WINDOWS: 15 ..................................................................
APPLICATION IN ACCORDANCE WITH REGULATIONS
1. This device is a professional DJ MIDI controller with integrated 4-channel soundcard that can control software. The device should be connected via USB cable to a computer or via iOS
Connection cable to the iPad / iPhone.
2. This product is authorized for connection to 100 - 240 V, 60/50 Hz AC via mains adapter (included) and is designed exclusively for indoor application.
3. If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any
other application that does not comply with the specied purpose harbours risks such as short circuit, re, electrical shock, etc.
4. The serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAINTENANCE
5. Check the technical safety of the device regularly for damage to the mains cord or the casing, as well as for wearout of wear parts such as rotary knobs and sliding faders.
6. If it is to be assumed that a safe operation is no longer feasible, then the device must be disconnected and secured against accidental use. Always disconnect the mains plug from the outlet!
7. It must be assumed that a safe operation is no longer feasible, if the device bears visible defects, if the device no longer functions, following longer storage under unfavourable conditions
or after major transport stress.
SCOPE OF DELIVERY
- TOUCH controller
- Power supply unit
- USB cable
- Instruction manual
- License card
SETUP AND CONNECTIONS
1. Connect your output devices (headphones, speakers, etc.) to the TOUCH. Audio output takes place via the master output (JACK and RCA).
2. Connect your microphone to the TOUCH. The microphone input takes place directly on the master channel.
3. Make sure that the Mixon is turned off and that the master faders is in the 'min' position.
4. Connect all devices to a power outlet and turn them all on.
INSTALLATION
1. Go to http://www.reloop.com/touch and download the "Reloop TOUCH Installer & Driver Package“.
2. Open the installer le via double-click.
3. During installation you will be asked to enter a licence code. You can nd this code on the licence card which is included in the TOUCH gift box.
4. Follow the instructions in order to complete installation.
5. Go to http://www.virtualdj.com/reloop and follow the instructions in order to download and activate VirtualDJ Pro for your TOUCH controller.
6. You will be asked to enter another licence code. This can be found on the back of your licence card.
7. Now turn on the device and start VirtualDJ.


Produktspezifikationen

Marke: Reloop
Kategorie: DJ Ausrüstung
Modell: Touch

Brauchst du Hilfe?

Wenn Sie Hilfe mit Reloop Touch benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung DJ Ausrüstung Reloop

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-