Qtx Recharge Performer Bedienungsanleitung

Qtx Erleichterung Recharge Performer

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qtx Recharge Performer (4 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.avsl.com 151.546 User Manual UK
Recharge Performer
LED PAR Bar with Tripod
Item ref: 1.546 15 UK
User Manual
Ideal for performers, this complete portable lighting set
comprising 4 RGBW PAR lights is powered from a rechargeable
T-bar with an internal lithium battery that pr des up to 6 ovi
hours use without the need for additional power. Easily
controlled via DMX, infra-red remote control or internal auto
and sound-activated programs selectable from the rear control
panel. Each lighting fixture is angle-adjustable to distribute
colour washes around the room. Supplied with 2.3m telescopic
tripod stand and carry bags making it ideal for transporting to
venues and events where power isn't readily available.
In the box:
Your Recharge Performer should arrive with u i a ngle carton in good condition. T carton should yo n si he
contain 1 x T-bar with 4 RGBW PAR cans attached 1 x 2.3m Tripod Stand, 1 x Remote Control, 1 x UK : ,
3m IEC mains lead, 1 x T-Bar Carry Bag, 1 x Tripod Stand Carry Bag and 1 x manual. user
Warnin g:
To prevent risk of re or electric shock, do not expo the unit to rain or damp environments. In the event fi se
of a spillage, disconnect the mains and al w the unit to dry out naturally. Qualified personnel should then lo
check the unit fore continuing u . be se
Please read rough this manual thoroughly b ore use, any dama th ef ge
c by misuse of product will not be covered by warrantaused y.
Please do not open cover, tains high voltage. This con
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 1.546UK User Manual 15
Placement:
Open the included tripod stand legs onto the floor ensuring the thumbscrews are tightened and it s
set down on a flat stable surface away from walkways or where it can be easily knocked over.
Attach the T-Bar to th of the stand d tighten e thumbscrew ensuring its secure. e top an th
Keep the unit away from damp or dusty environments.
Ensure adequate air- ow around the fixture housings. fl
Ensure ade ate access tqu o controls and connections.
Do not aim LED or laser output rectly into line sight, as this can result in eye injury. di of
Cleaning:
Use a soft cloth with a neutral detergent to clean the casing as required.
Use a vacuum cleaner to clear venti tion gr of any dust or debris build-ups. la illes
Do not use strong solvents for cleaning th unit. e
Rear panel and controls:
1. Power switch
2. IEC input (110-240 Vac, 50/60 Hz)
3. Earth screw (do not remove)
4. DMX input
5. DMX output
6. Control panel
7. LED display
8. Microphone
9. Battery charge status
Manual control menu:
Press the “ ” buttoMENU n enter the settings menu. to
Press “ ” and “UP DOWNbuttons to navigate through various setting functions.
Press button confirm the desired setting. ENTER to
Sequence
Number
Display
Sub-Menu
Function/Action
1
d001 d512
001 - 512
DMX address setting
2
IP.01 IP.64
001 - 512
IP mode
3
A1.01
A1.01 A1.18
Static Colour. Select one of 18 colour options
4
A2.01
A2.01 A2.32
Colour Jump. A2.01 (slowest) A2.32 (fastest)
5
A3.01
A3.01 A3.19
Multi Colour. Different Colour selection available
1.
2.
3.
5.
9.
www.avsl.com 1.546UK User Manual 15
6
A4.01
A4.01 A4.04
Sound to Light Function
7
A5.01
A5.01 A5.32
Strobe Function A5.01(slowest) A5.32 (fastest)
8
r000 r255
Adjust red colour intensity. r000 (off) r252
(brightes t)
9
G000 G255
Adjust green colour intensity. G000 (off) G252
(brightest)
10
b000 b255
Adjust blue colour intensity. b000 (off) b252
(brightest)
11
u000 u252
Adjust white colour intensity. u000 (off) u252
(brightest)
DM mode: X
The Recharge Performer can be controll by DMX signal, simply nnect the DMX sig l source the ed co na to
DMX put on the unit a balanced XLR lead. Extra fixtures can be controlled by the same DMX signain vi a l
by looping through the DMX out on the To ent DMX mode, select A001 from the menu and counit. er nfirm
the correct start address using thby e “ ” UP and DOWN buttons and ENTER. The A on the LED
display will begin to flash once it s received the DMX signal from the controller. This unit has 8 DMX
channels as indicated in the tables below:
8 Cha el:nn
Channel
Value
Function
1
0 - 10
Macro A1
11 - 50
Macro A2
51 - 100
Macro A3
101 - 150
Macro A4
201 - 255
Macro A5
210 255
Red + Green + Blue
2
0 - 255
Macro Colour
3
0 - 5 25
Speed Adjustment
4
0 - 255
Master Dimmer
5
0 - 255
Red Dimmer
6
0 - 255
Green Dimmer
7
0 - 255
Blue Dimmer
8
0 - 255
White Dimmer
Remote control:
All lights on
Colour gradual change
Colour adjust -/+
Blackout oon/ ff
Colour jump change
Running effect -/+
Strobe mode
DMX Channel -/+
Sound active mode
Speed adjust -/+


Produktspezifikationen

Marke: Qtx
Kategorie: Erleichterung
Modell: Recharge Performer

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qtx Recharge Performer benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Erleichterung Qtx

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-