Qtx HPWash100 Bedienungsanleitung

Qtx Verlichting HPWash100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Qtx HPWash100 (4 Seiten) in der Kategorie Verlichting. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.avsl.com 4.050UK User Manual 15
HP Wash100
High Power Stage Blinder
Item ref: 4.050 15 UK
User Manual
Thank you for choosing the HPWASH a powerful 100W white LED stage-blinder for fully 100, a
controllable light wash to stage or audience. Linear dimming control via DMX or internal
programs can provide a smooth or immediate transition from blackout to full brightness.
Housed in an all-metal casing with fan cooling for durability and reliable operation.
In the box:
Your HPWASH should arrive with you in a single carton in good condi on. T carton 100 ti he
should contain 1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments.
In the event of a spillage, disconnect the mains a allow the unit to dry out naturally. nd
Qualified personnel should then check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
cause by misuse of product will not be covered by warrantd y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 4.050UK User Manual 15
Placement:
Use the included mounting bracket to fix to a stand or lighting truss
Use secondary safety fixings if mounting overhead.
Keep away from damp or dusty environments
Ensure adequate air- ow around the fixture housings fl
Ensure adequate access to controls and connections
Cleaning:
Use a soft cloth with a neutral detergent to clean the casing as required
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
Do not use strong solvents for cleaning the unit
Rear panel controls:
1. IEC mains in (Fused)
2. Earth screw (DO NOT REMOVE)
3. LCD display
4. Manual control buttons
5. DMX signal in
6. DMX signal out
Manual control menu:
Press the “ ” button to enter MENU the settings menu.
P buttons navigate through various setting functions ress “ ” and “ UP DOWN to .
P button to confirm the desired setting. ress “ENTER
1.
2.
3.
4.
5.
6.
www.avsl.com 4.050UK User Manual 15
Menu
Function
d0xx
d -d512 001
Auxx
Au01-Au03
Au04-Au05
So01
So02
Stxx
St00
St01-St16
Sn xx
Sn01 - 6 Sn1
Spxx
Sp01-Sp16
U0xx
u -u 001 255
DMX mode:
The HPWASH100 can be controll by DMX signal, simply connect the DMX signal source to ed
the DMX input on the unit via balanced XLR lead. Extra fixtures can be controlled by the a
same DMX signal by looping through the DMX out on the unit To enter DMX mode, select .
D from the menu and co m the correct start address using the and 001 nfir by “ ”UP “ ”DOWN
buttons and to confirm “ ”ENTER .
This unit has 6 DMX channels as indicated in the table below:
Channel
Channel address
Function
CH1
0- 255
Master dimmer low to high
CH2
1- 255
Strobe Slow to fast
CH3
1- 255
Macro effects selection
CH4
0- 255
Macro effects speed adjust slow to fast
CH5
0- 255
Right lamp white dimmer low to high
CH6
0- 255
Left lamp white dimmer low to high
Specifications:
Power pply su
110-240Vac, 50/60Hz (IEC)
Power consumption
100W
Fuse rating
F2AL, 250Vac
Light source
2x 50W White LED
DMX c hannels
6
Beam angle
40°
Housing
Full Metal, powder painted.
Dimensions
270 35 125x1 x mm (Without bracket)
Weight
1.52kg

Produktspezifikationen

Marke: Qtx
Kategorie: Verlichting
Modell: HPWash100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Qtx HPWash100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Verlichting Qtx

Bedienungsanleitung Verlichting

Neueste Bedienungsanleitung für -Kategorien-