Projecta HDBT252 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta HDBT252 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
P/No. HDBT252
Tray Fitting Instructions to suit Auxiliary battery for
Mazda BT50 B3000 Automatic/Ford Ranger PJ–PK Automatic
Years: Jan 2007 – Oct 2011
Models: WLT – 2.5 Litre Turbo Diesel & 3.0 Litre Diesel
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L265 x W174 x H220
Max Battery Weight 18Kg
Recommended batteries Exide LCS 24-86, Exide ORBITAL ORB34DC & Century NS70T
Approximate fitting time 1.5 hours
Special tools None required
Recommended Dual IDC25, DBC100, DBC150, VSR100 or VSR200
Battery System
Tray Location Engine Bay, Passenger Side near radiator support
KIT INCLUDES
Hardware
2 x M6 Bolt Countersunk
5 x M6 Nut
5 x M6 Bolts Hex
1 X M8 Bolt
5 x 150mm Cable tie
Special
Top Mount
Tray
J Bolts
Computer Mount
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminals from the main battery.
2. Your Auxiliary tray will be located between the passenger side headlight and air
cleaner. Remove the rear M8 bolt with large flange located on inner guard where
you will locate tray, in between the headlight and air cleaner and retain.
3. Move wiring loom from the same position.
4. Remove Computer mounting bracket from inner guard.
5. Remove wiring and relay from bracket.
6. Remove computer from bracket by removing 2 x M6 nuts and removing hold
down bracket.
7. Bolt computer to new computer mount, using top clamp.
8. Bolt computer mount to side of tray using 2 x M6 bolts Countersunk and
M6 Whizlocks.
3
FITTING INSTRUCTIONS

Produktspezifikationen

Marke: Projecta
Kategorie: Nicht kategorisiert
Modell: HDBT252

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta HDBT252 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Projecta

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-