Projecta HDBT204 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta HDBT204 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Tray Fitting Instructions to suit Auxiliary battery for
MITSUBISHI TRITON & PAJERO SPORT
Years: 2015 onwards
Models: 2.4 Litre TD
HEAVY DUTY DUAL BATTERY TRAY
P/No. HDBT204
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
• Ensure original parts and pipes have sufficient clearance from the tray and battery.
Push them away from the tray if required.
SPECIFICATIONS
Max Battery Size (mm) L265 x W174 x H220
Max Battery Weight 17Kg
Recommended Batteries Exide LCS24-86 Optima D34 Century NS70T
Approximate Fitting Time 1 hour
Recommended Dual P/No: IDC25, DBC100, DBC150, VSR100, VSR200
Battery System
Tray Location Engine bay, passenger side rear
NOTE: Another option would be to fit a small high crank starting battery of around (630CCA) in the new
Heavy Duty Dual Battery tray to be fitted and the original battery position could hold a 100Ah battery.
KIT INCLUDES
Hardware
1 x M6 Short Bolt
1 x M8 Short Bolt
1 x M8 Long Bolt
2 x M8 Nuts
Special Top
Mount
J Bolts
Tray
3
FITTING INSTRUCTIONS
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative and positive battery terminals from the main battery.
2. Remove main battery. Remove M6 bolt holding wiring loom bracket at rear of
battery and discard bracket and battery box (if supplied).
3. Remove 2 x M8 nuts from Bosch relay and remove M8 bolt on brake line bracket
on the lower firewall.
4. Relocate fuel line on plastic clips on fire wall to the lower position on plastic clip.

Produktspezifikationen

Marke: Projecta
Kategorie: Nicht kategorisiert
Modell: HDBT204

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta HDBT204 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Projecta

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-