Projecta HDBT202 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta HDBT202 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
P/No. HDBT202
Tray Fitting Instructions to suit Auxiliary battery for
Mitsubishi Triton 4th Generation
Years: 2006 onwards
Models: 4M41 DID 3.2Litre & 4D56 2.5 Litre Turbo Diesel, 6G74 3.5Litre
V6 Petrol & 4G64 2.4 Litre Petrol
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L300 x W174 x H220 Petrol,
L265 x W174 x H220 Diesel
Max Battery Weight 23Kg Petrol, 18Kg Diesel
Recommended batteries Exide LCS 27-97, Century N70TMF (Petrol)
Exide LCS 24-86, Century NS70T (Diesel)
Approximate fitting time 1.5 hours
Special tools None required
Recommended Dual Petrol: can use IDC25, DBC150 or VSR200
Battery System Diesel: can use IDC25, DBC100 or VSR100
Tray Location Engine Bay, Passenger Side (Replacement of original tray)
KIT INCLUDES
Hardware
2 x M6 Bolt Hex
2 x M6 Washer
1 x M6 Bolt Long
1 x M8 Short
Universal
Top Mount
600mm
Vac Hose
Tray
J Bolts
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect both negative and positive battery terminals from the main battery and
remove main battery.
2. Remove existing plastic battery tray.
3. Remove bracket and clips that holds existing loom onto the inner guard.
4. Remove 13mm vacuum hose from engine and vacuum canister, replace later with
lengthened 13mm hose, provided.
5. Loom and hoses below vacuum canister need to be re-routed towards the firewall.
6. Slide tray under loom into position bolt M6 long bolt into the captive nut next
to the dipstick.
3
FITTING INSTRUCTIONS


Produktspezifikationen

Marke: Projecta
Kategorie: Nicht kategorisiert
Modell: HDBT202

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta HDBT202 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Projecta

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-