Projecta HDBT200 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta HDBT200 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
P/No. HDBT200
Tray Fitting Instructions to suit Auxiliary battery for
Mitsubishi Pajero NM-NW
Years: 2000 onwards
Models: 4M41 DID 3.2 Litre, 6G74 3.5 Litre V6 Petrol
HEAVY DUTY DUAL BATTERY TRAY
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L265x W174 x H220
Max Battery Weight 18Kg
Recommended batteries Exide LCS 24-86 & Century NS70T
Approximate fitting time 2 hours
Special tools None required
Recommended Dual If NW P/n: IDC25
Battery System Other vehicles can fit IDC25, DBC150 or VSR200
Tray Location Engine Bay, Passenger Side near Fire Wall
KIT INCLUDES
Hardware
3 x M6 Bolt
3 x M6 Nut
2 x Body Washer
2 x Weld Bolt
1 x M8 Bolt Long
1 x M8 Nut
Universal
Top Mount
Cruise
Control
Bracket
Tray
J Bolts
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminal from the main battery.
2. Early petrol models had a charcoal canister which will need to be moved to drivers
side and lengthen vacuum hoses (not supplied).
3. Early petrol models will need cruise control relocated to battery with bracket and 2
x weld bolts & M6 nuts provided.
4. Bolt tray using 1 x M6 Bolt to firewall which is captive. 1 X M6 bolt with nut to
drivers side of tray. 1 x M8 nut to stud at front of tray. 1 X M8 bolt and nut to inner
guard with body washer. Will need to partially remove outer guard inner lining to
get to bolt.
5. Fit the battery, J bolts and Universal top mount.
6. Reconnect the negative battery terminal to the main starter battery or install the
desired Dual Battery System. Before closing the bonnet make sure the battery, tray
and J bolts do not hit the bonnet.
For assistance throughout the installation procedure please call our customer service
representatives on 1800 113 443.
3
FITTING INSTRUCTIONS


Produktspezifikationen

Marke: Projecta
Kategorie: Nicht kategorisiert
Modell: HDBT200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta HDBT200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Projecta

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-