Projecta HDBT100 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Projecta HDBT100 (30 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/30
Tray Fitting Instructions to suit Auxiliary battery for
TOYOTA 70 SERIES – V8 TURBO DIESEL – with ABS
Model: All 70 Series from Aug 2012 onwards
with factory fitted ABS
HEAVY DUTY DUAL BATTERY TRAY
P/No. HDBT100
2
IMPORTANT SAFETY INFORMATION
Please read this instruction thoroughly before fitting the tray.
This product is recommend to be fitted by a workshop or qualified mechanical person.
WARNINGS
• Before installation, make sure that the vehicle is stationary and the wheels chocked.
• Be careful when laying wires, not to cause any electrical shorts or wire breakage.
• After installation ensure the bonnet can close without hitting the newly installed battery
and battery tray.
SPECIFICATIONS
Max Battery Size (mm) L300 x W175 x H220
Max Battery Weight 24Kg
Recommended batteries Optima D27M & Optima D31A
Approximate fitting time 1.5 hours
Special tools None required
Recommended Dual DC to DC Charger (P/n: IDC25)
Battery System
Tray Location Engine Bay, Passenger side near firewall
KIT INCLUDES
Hardware
2 x M8 Bolts
2 x M8 Bolts long
1 x M8 Nut
4 x M6 Bolt
1 x M6 Weld Bolt
4 x M6 Nuts
3 x M6 Body Washer
Battery Hold
Down Clamp
Long Top
Support
Short Top
Support
ABS
Computer
Mount
Tray
J Bolts
3
FITTING INSTRUCTIONS
1. Make sure that the vehicle is stationary, the engine is switched off and cool.
Disconnect the negative battery terminal from the main battery.
2. Disconnect and remove the two computers located on wheel arch on passenger
side rear of engine bay taking note of which plug goes to which computer.
3. Remove mounts for the computers (these are no longer required).
4. Secure the wiring joiners against the firewall under multi-pin connector
on firewall.
5. Unbolt and relocate trailer plug fuse/relay box to inner guard using 1 x original
bolt into existing threaded hole.


Produktspezifikationen

Marke: Projecta
Kategorie: Nicht kategorisiert
Modell: HDBT100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Projecta HDBT100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Projecta

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-