Ozito PXJBS-0182 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXJBS-0182 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
BRUSHLESS
JET BLOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V x 2
No Load Speed: 10,000 - 22,300/min
Max. Air Speed: 210km/hr
Max. Air Volume: 816m/hour
Noise Rating: 94 dB
Tool Weight: 2.5kg
PXJBS-0182
STANDARD EQUIPMENT
Brushless Jet Blower
Blower Nozzle
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
1220
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: Nozzle.
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1. Slide the nozzle over the
blower outlet, aligning the
nozzle grove (A) with the
tab (B) on the outlet of the
jet blower.
2. When the nozzle has
reached one of the three end
points on the outlet of the
jet blower, rotate the nozzle
to lock in place.
Fitting the Jet Blower Nozzle
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERIES DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
BRUSHLESS JET BLOWER
1 2 3 4
1. Nozzle
2. Variable Speed Dial
3. Turbo Boost Button
4. ON/OFF Trigger
5. Handle
6. Battery Seating
7. Scraper Ring
B
A
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
ACCESSORIES
8. Shoulder Strap
Fitting the Shoulder Strap
1. Ensure the shoulder strap is
clipped onto the eyelet at the
top of the jet blower.
2. To unclip the jet blower, press
either side of the buckle.
Note: To use the shoulder strap simply slide the strap over your shoulder so that some
of the weight of the jet blower can be taken by your shoulder.
5 6
8
There are three settings for adjusting the length of the nozzle to your
requirements.
WARNING! THE NOZZLE MUST BE TURNED AS FAR
AS IT WILL GO TO ENSURE IT IS FIRMLY SECURE IN
POSITION.
7
3. CONTROLS & OPERATION
2. INSERTING & REMOVING THE BATTERIES
OPERATION
1. Align the ribs of the battery with
the recess in the jet blower.
1. Press and hold the battery
release tab to release the
battery.
2. Slide the battery in so
that it clicks into place.
1. Squeeze the on/off trigger to
start. Motor will start after
short delay.
2. To stop operation, release the
on/off trigger.
2. Slide the battery out.
Inserting the Battery Pack
Removing a Battery from the Jet Blower
Switching On and Off
WARNING!: DO NOT SWITCH THE JET BLOWER ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
1. To increase the air speed
rotate the dial to the
“MAX”setting.
2. To lower the air speed
rotate the dial to the
“MIN” setting.
Variable Speed Dial
1. Press Turbo Boost Button
for maximum air speed.
Turbo Boost Button
2. Release button to return
to normal air speed.
Note: Always use 2 batteries of the same capacity and same charge
state with the jet blower. Turbo boost button is only operational with 3.0Ah
batteries and above.
Note: Always use the speed which is actually required and never run at a
speed which is faster than necessary.
Note: To reduce noise and prolong battery operating time, never actuate the
turbo speed button longer than necessary.
Note: Turbo boost button is only operational with 3.0Ah batteries and above.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXJBS-0182

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXJBS-0182 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-