Ozito PXBCSS-184 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXBCSS-184 (8 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
STANDARD EQUIPMENT
RIGHT HANDED SAW
THIS SIDE OUT
24
184MM
TOOTH
Max. Spee d 9500rpm
Bor e : 20mm
Th ic kness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
7¼”)
WARNING !
Do not use tungsten carbide tipped blades f or
masonry or metal cutt ing applications.
RIGH T HANDED SAW
THIS SIDE OUT
24
184MM
TO O T H
Max. Spe ed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
7¼”)
WAR N ING !
Do n o t u se tu n g ste n carb id e ti p p e d b lad e s fo r
maso n r y o r m e t al cu tt in g ap p li cati o n s.
PXBCSS-184
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 3,800/min
Blade Size: Ø184mm (7¼”) 24TCT
Blade Bore: Ø20mm
Blade Thickness: 1.6mm Thin Kerf
Depth of Cut: 62mm @ 90°
43mm @ 45°
Weight: 3.295kg
ozito.com.au
0819
Cordless Brushless Circular
Saw & Ø184mm 24TCT Blade
Rip Fence & Hex Key
BRUSHLESS
184MM (7¼”)
CIRCULAR SAW
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other than that specied
on the tool.
If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
RIGHT HANDED SAW
THIS SIDE OUT
24
184MM
TOOTH
Max. Speed 9500rpm
Bore : 20mm
Thi ck ne ss : 1.6mm
TUNGSTEN
CARBIDE
TEETH
”)
WARN ING!
Do not use tungsten carbide tipped blades for
masonry or metal c utting applications.
45°
30°
Installing & Removing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
2. To remove the battery,
hold down the battery
release button and then
slide the battery out.
Attaching The Rip Fence
The rip fence allows you to perform straight cuts with ease.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
1. Insert the rip fence
through the rip fence
slots in the front of the
baseplate.
2. Once the desired width is set,
tighten the locking knob to
secure in place.
3. To remove, loosen the
locking knob and then
slide the rip fence out.
1. Dust Extraction Port
2. Rear Handle
3. On/Off Trigger
4. Lock-Off Button
5. Front Handle
6. Worklight
7. Spindle Lock Button
8. Cutting Guide Notch
9. Bevel Angle Scale
10. Hex Key Storage
11. Bevel Locking Lever
12. Upper Blade Guard
13. Rip Fence Locking Knob
14. Rip Fence
15. Blade
16. Lower Blade Guard
17. Blade Guard Lever
18. Depth Locking Lever
19. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
For optimal performance, we recommend the use of a 3.0Ah battery or higher to
operate this Power X Change Circular Saw.
CORDLESS BRUSHLESS CIRCULAR SAW
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY & GUIDE
SETUP & PREPARATION
RIG HT H ANDE D SAW
TH IS SI DE OUT
24
184MM
TO OTH
Ma x. Sp ee d 9500rp m
B ore : 20mm
Thickne ss: 1.6mm
TU NG S T EN
CAR BID E
TEET H
7¼”)
WARNING!
Do not us e tun gs te n ca rbid e tipp e d bla de s fo r
mas on ry o r me ta l c uttin g a pp lic atio ns .
DED SAW
E OUT
24
TOOTH
9500rpm
0mm
1.6mm
TUNG ST EN
CARBIDE
TEET H
RIGHT HANDED SAW
THIS SIDE OUT
24
MM
TOOTH
Max. Sp eed 9500rpm
Bo re : 20mm
Th ic kne ss: 1.6mm
TUNGSTEN
CARBIDE
TEET H
NG!
s ten carbide tipped blades for
al cutting applications .
a.
b.
184MM T UN GS
CA R
T
7¼”)
24
184MM
TOOTH
TU NG ST E N
CARB IDE
TE ET H
”)
a.
b.
2
13
3
1
5
6
7
8
19
4
18
12
15
11
9
10
17
16
14
Changing The Blade
This tool is for wood cutting only and is not recommended for use with
abrasive wheels or masonry/diamond cutting wheels. Only use Ø184mm
wood cutting blades.
1. Press and hold the spindle lock.
2. Use the hex key to rotate the
blade until the spindle lock
engages. Remove the blade bolt
and outer blade ange.
3. Retract the lower blade guard
fully.
4. Remove and replace the blade.
Ensure that the arrows on the
blade point in the same direction
as the arrow on the upper blade
guard.
5. Replace the outer blade ange and blade bolt.
WARNING! ONLY USE BLADES WITH THE CORRECT
SIZE AND SHAPE OF BORE HOLE. ONLY USE THE
FLANGE AND BOLT SUPPLIED WITH THE TOOL.
6. Hold down the spindle lock and
tighten the blade bolt with the
hex key.
Depth Adjustment
Depth should be adjusted so that no more than one tooth is protruding
through the timber. This helps to minimise splintering.
1. Loosen the depth adjustment
lever.
Note: Do not push the lever
behind the depth adjustment scale.
2. Hold the baseplate down with
one hand. Raise or lover the saw
to the desired depth.
3. Tighten the depth adjustment
lever to secure in place.
2. FITTING A BLADE 3. CUTTING ADJUSTMENTS
45°
30°
0
5
10
20
25
30
35
40
45
50
55
60
65
15
15
RI GH T HAN DED S AW
TH IS S IDE OU T
24
184MM
TO O TH
Max. Sp eed 9500rp m
Bore : 20mm
Thickness: 1.6mm
TUNG S TEN
CAR B ID E
TEETH
7¼”)
WAR NING!
Do n ot use tu n g ste n c arbi de tip pe d b lade s for
masonry o r m e tal c u ttin g app lic atio ns.
20
25
30
35
40
45
50
55
60
65
RIGHT HANDED SAW
THIS SIDE OU T
24
184MM
TOOTH
Max. Spe ed 9 500 rpm
Bo re : 20mm
Thi ckn ess : 1.6mm
TUNG S TE N
C ARB ID E
TE ET H
(7¼”)
WARNING!
Do not us e tungs te n c arbide tippe d bla de s for
mas onry or me tal cutting app lications .
RIG HT H ANDED SAW
THI S SIDE OU T
24
184
MM
TOOTH
Ma x. S pe ed 9500rp m
B ore : 20mm
Thick ness: 1.6mm
TUN N
C E
H
(7¼”)
WARNING!
Do no t u se tu ng ste n ca rb ide t ipp e d bla de s fo r mason ry or m e ta l c utti ng ap pl ic ati on s.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! INSPECT THE BLADES BEFORE EACH
USE. REPLACE IF DAMAGED.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Produktspezifikationen

Marke: Ozito
Kategorie: niet gecategoriseerd
Modell: PXBCSS-184

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXBCSS-184 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Ozito

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-