Ozito PXHVS-218 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXHVS-218 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
STANDARD EQUIPMENT
PXHVS-218
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Air Flow: 17L/sec
Suction Power: 72 mbar (7.2kPa)
Dust Capasity: 600ml
Weight: 0.94kg
ozito.com.au
0223
Cordless Vacuum
Brush Tool
Onboard Accessory Holder
2 X Extension Tubes
Wall Holder
Floor Tool
Crevice Tool
2 SPEED
HAND VACUUM
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, VIC 3175, Australia.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
10 11 12
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button (a) and then slide the
battery out.(b)
1. Nozzle
2. Dust Container
3. Dust Container Release Button
4. On/Off Switch
5. Sure Grip Handle
6. Battery Seating
This tool is compatible with all batteries & chargers from the Ozito PXC range.
2 SPEED HAND VACUUM
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1 62 3 4 5
7 8 9
WARNING! ENSURE THE ON/OFF SWITCH IS IN THE
OFF POSITION BEFORE ATTACHING A BATTERY TO
THE TOOL.
ACCESSORIES
7. Brush Tool
8. Cervice Tool
9. Floor Tool
10. 2 x Extension Tubes
11. Wall Holder
12. Onboard Accessory Holder
a
b
Switching On and Off
1. To start the vacuum push the
switch forwards into the Eco
Mode for longer runtime, ideal
for hard oor applications.
2. Push the switch forwards again
to start the Boost Mode for
maximum suction power for
carpet applications.
Attaching Accessories
1. Align the accessory with the
vacuum nozzle and push into
place.
2. To remove simply pull the
accessory away from the vacuum
nozzle.
Note:
Accessories like the Brush Tool, Cervice Tool, Extension Tubes and the Floor
Tool can be attached to the nozzle following the same procedure.
Using The Wall Holder
1. Place the wall holder against
the wall and use the screws to
fasten it on to the wall.
2. Insert the Floor Tool and the
Extension Tubes on the wall
holder to store them.
3. The vacuum can be hung on the
wall holder.
2. ASSEMBLY 3. CONTROLS
OPERATION
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! DO NOT PUT PART OF YOUR BODY
SUCH AS HANDS AND FINGERS NEAR THE INLET
OPENING OF THE VACUUM.
ECO


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXHVS-218

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXHVS-218 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-