Ozito PXCLES-018 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXCLES-018 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
CORDLESS
LAWN EDGER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:18V
No Load Speed: 4,400/min
Cutting Depths: 36.5, 40, 45mm
Blade: 190mm x 18mm bore
Weight: 3.0kg
PXCLES-018
STANDARD EQUIPMENT
Cordless Lawn Edger
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0319
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: blade, blade nut,
blade ange and included accessories.
Blade Spanner & Pin
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1. Align both halves of the shaft together, pushing the upper shaft into the
lower. Push until the collar is up against the lower shaft.
Shaft Assembly
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY IS DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS LAWN EDGER
1 2 3 4
1. Rear Handle
2. Lock-Off Switch
3. On/Off Trigger
4. Adjustable Handle
5. Shaft Lock
6. Cutting Blade
7. Blade Guard
8. Guide Wheel
9. Motor Housing
10. Depth Adjustment Lever
11. Depth Adjustment Wheel
ACCESSORIES
12. Blade Pin 13. Blade Spanner
2. Slide the shaft lock over the collar onto the threaded section and screw
tight.
56 7
8 9
12 13
1110
Collar
3. INSERTING & REMOVING THE BATTERY
2. ADJUSTMENTS
1. Align the ribs of the
battery with the
recess in the lawn
edger just below the
handle and slide in
until it clicks into
place..
2. To remove, press
and hold the battery
release tab and then
slide out.
2. To decrease the
cutting depth pull the
lever out and move
it down a notch,
towards the rear.
Adjusting the Cutting Depth
Adjusting the Handle
1. Release the adjustable
handle lever.
Note: If you are unsure of which cutting height to use, begin with smallest
depth setting 3 - 36.5mm (shallowest) and complete a trial cut on a small
section of the lawns edge.
Re-adjust if necessary
The lawn edger has a depth adjustment lever to easily adjust the cutting depth.
There are 3 cutting depth settings; 3 - 36.5mm, 2 - 40mm and 1 - 45mm.
2. Adjust the handle
into the most
comfortable position,
then lock in place
with the lever.
3. To increase the
cutting depth pull the
lever out and move it
up a notch, towards
the front of the unit.
1. Remove the battery pack.
4. Ret the battery pack.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXCLES-018

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXCLES-018 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-