Ozito PXBWS-400 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXBWS-400 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
STANDARD EQUIPMENT
BRUSHLESS
BRU SHL E SS
PXBWS-400
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 0-2,100/min
Max. Torque: 200Nm (Speed 1)
280Nm (Speed 2)
400Nm (Speed 3)
Impact Rate: 0-3,300/min
Drive Shaft: 12.7mm (½”) Square
Weight: 2.0kg
ozito.com.au
0722
Brushless Impact Wrench &
Belt Clip
½” IMPACT
WRENCH
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
3
2
1
SPEED
SETTING
BRUSHLESS
Attaching The Belt Clip
The belt clip can be installed on either side of the tool.
1. Align the tabs on the belt clip
with the cutouts on the side of
the tool you want to attach the
belt clip.
2. Insert the screw supplied and
tighten to hold the belt clip in
place.
Fitting & Removing Drive Sockets
1. Align the square end of a ½”
drive socket with the drive shaft
and push it on until it clicks into
place.
2. Pull the socket off the drive shaft
to remove it.
WARNING! DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL
INJURY.
1. Speed Setting Button
2. Speed Setting Indicator
3. ½” Square Drive Shaft
4. Forward/Reverse Lever
5. On/Off Trigger
6. Sure Grip Handle
7. LED Worklight
8. Battery Seating
9. Belt Clip
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this PXC Impact Wrench.
BRUSHLESS IMPACT WRENCH
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
3
5
1
2
6
7
8
9
4
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Forward/Reverse Lever
1. To fasten bolts, push the
forward/reverse button towards
the left of the tool.
2. Push the button towards the
right of the tool to reverse the
rotation.
Trigger Lock
The forward/reverse lever can be set in the middle position to lock the
trigger and prevent accidental starting.
Switching The Tool On/Off
1. Squeeze the on/off trigger to
start the tool.
2. Release the trigger to stop the
tool.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button and then slide the battery
out.
2. BATTERY FITMENT 3. CONTROLS
SHLESS
3
2
1
SP EED
SET T I N G
FORWARDS
REVERSE
3
2
1
SPEED
SE T T IN G
TRIGGER
LOCKED
BRUSH
BRU
SHLESS
a.
b.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXBWS-400

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXBWS-400 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-