Ozito PXBSPS-180 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXBSPS-180 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
STANDARD EQUIPMENT
BRUSHLESS
BRUSHLESS
PXBSPS-180
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 500-2,800/min
Speed Settings: 7
Disc Diameter: Ø180mm
Weight: 2.2kg
ozito.com.au
0719
Brushless 2-in-1 Sander /
Polisher
Hex Key, D Handle, 2 x Handle
Bolts, Side Handle, Spacer &
Hook & Loop Accessory Disc
Foam Application Pad,
Synthetic Polishing Bonnet, 3
x Sandpaper (60, 80, 120grit)
BRUSHLESS
2-IN-1
SANDER /
POLISHER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
BRUSHLESS
0 I
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button and then slide the battery
out.
1. Spindle Lock
2. D Handle
3. On/Off Switch
4. Digital Speed Display
5. Speed Control Buttons
6. Battery Seating
7. Hook & Loop Accessory Disc
8. Spacer
9. Side Handle
10. Hex Key
11. Foam Application Pad
12. 3 x Sandpaper (60, 80, 120gr)
13. Synthetic Polishing Bonnet
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
BRUSHLESS 2-IN-1 SANDER/POLISHER
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
BR USHLESS
BRUSHLESS
a.
b.
23
7
1
45
6
8910
11 12
13
Attaching The Side Handle
The side handle should be used when working on contoured worksurfaces.
1. To attach the side handle, slide
the spacer onto the side handle
screw.
2. Screw the side handle into one of
the handle bolt holes on the tool.
Note: Always hold the tool handle
and side handle with both hands
when the tool is in use.
3. To remove the handle, turn it anti-clockwise to unscrew it from the unit.
Attaching The D Handle
The D handle should be used when working on at work surfaces.
1. Place the tool between the two
arms of the D handle, then slide
the handle forward into the slots
on each side of the tool.
2. Place a handle bolt into the hole
on the side of the D handle, and
use the hex key to tighten this
into place.
3. Repeat Step 2 with the second
bolt on the other side of the
handle.
4. To remove the D handle, undo the two bolts with the hex key and slide
the handle off the tool.
Attaching The Hook & Loop Accessory Disc
1. Press and hold down the spindle
lock buton.
2. Slide the accessory disc onto the
spindle and turn it anti-clockwise
to attach it.
3. To remove the accessory disc, press and hold down the spindle lock
button, then turn the accessory disc clockwise to unscrew it.
Installing Accessories To The Disc
1. Press the hook & loop backing of
the selected accessory against
the bottom of the accessory disc
to attach it.
2. FITTING THE SECONDARY HANDLES 3. ATTACHING ACCESSORIES
0 I
0 I
05
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXBSPS-180

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXBSPS-180 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-