Ozito LTM-3000 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito LTM-3000 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
LAMINATE
TRIMMER
350W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V ~ 50Hz
Power: 350W
No Load Speed: 30,000/min
Collet Size: 6.35mm (1/4”)
Weight: 1.7kg
LTM-3000
STANDARD EQUIPMENT
Laminate Trimmer
Trimming Guide
Straight Fence
Template Guide
Collet Spanners
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, spanners etc
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
0919
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
9 10 11 12 1413
1 On/O󰀨Switch
2 Base Locking Knob
3 Collet Nut
4 Spindle
5 Depth Adjusting Screw
6 Trimmer Guide Base
7 Fence/Guide Locking Screw
LAMINATE TRIMMER
KNOW YOUR PRODUCT
1 2 3 4 5 6 7
8
1. SETUP
8 Trimming Guide
9 Trimming Locking Knob
10 Trimming Adjustment Knob
11 Collet Spanners x 2
12 Straight Fence
13 Fence Locking Knob
14 Template Guide
ACCESSORIES
SETUP & PREPARATION
Removing the Trimmer Guide Base
Fitting the Trimmer Guide Base
FRONT VIEW SIDE VIEW
1 Loosen the base locking knob
by rotating anti-clockwise.
1 Slide the trimmer guide base
onto the housing.
2 Slide the trimmer guide base
o󰀨thehousing.
2 Secure in place by fastening
the base locking knob.
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
WARNING! NEVER USE THE LAMINATE TRIMMER
WITHOUT THE SAFETY GUARD FITTED.
Note: Adjust the trimmer base to the top position (0cm) or remove
completey to access the collet.
Thetrimmingguideallowsyoutotrimo󰀨apreciseamountofmaterial
o󰀨theedgeoftheworkpiece.
2. CHANGING ROUTER BITS 3. TRIMMING GUIDE
Removing Router Bits Fitting the Trimming Guide
Adjusting the Trimming Guide
Installing a Router Bit
1 Place the small spanner onto
the spindle and the large
spanner onto the collet nut.
1 Loosen the fence/guide
locking screw and insert the
trimming guide.
1 Loosen the trimming locking
knob to allow the lower plate
to slide.
3 Once the distance has been
set, secure in place with the
trimming locking knob.
3 Secure in place by tightening
the fence/guide locking screw.
3 Remove the router bit from the
spindle.
3 Place the small spanner onto
the spindle and large spanner
onto the collet nut..
4 Tighten the collet using the
large spanner.
1 Place the router bit into the
spindle.
2 Loosen and remove the collet
nut by rotating anti-clockwise
with the large spanner.
2 Set the height of the trimming
guide just below the router bit
when it is completely lowered.
2 Set the trimming size
by rotating the trimming
adjustment knob.
(Clockwise for a larger trim)
2 Screwthecolletnutngertight
over the spindle.
min 3mm


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: LTM-3000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito LTM-3000 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Ozito

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-