Optex VXI-ST Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Optex VXI-ST (3 Seiten) in der Kategorie Bewegungsmelder. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
SPECIFICATIONS
Detection method
PIR coverage
PIR distance limit
Detectable speed
Sensitivity
Power input
Current draw
Alarm period
Warm-up period
Alarm output
Trouble output
Tamper output
LED indicator
RF interference
Operating temperature
Environment humidity
International protection
Mounting
Mounting height
Weight
Accessories
* Specifications and design are subject to change without prior notice.
Model VXI-R VXI-RAM VXI-RDAM
12.0 m (40 ft) wide / 16 zones
12 - 2.5 m (5 levels)
0.3 – 1.5 m/s (1 - 5 ft/s)
2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
3 – 9 V DC(Lithium or Alkaline Battery)
10μA (standby) / 4 mA (max)
at 3 V DC
2.0 ±1 sec.
Approx. 60 sec. (LED blinks)
N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)
N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max)
No alarm 10 V/m
95% max.
IP55
Wall, Pole (Outdoor, Indoor)
0.8 – 1.2 m (2.64 ft 3'94 ft)
Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20mm) ×2, Masking seal ×3
Detection method
PIR coverage
PIR distance limit
Detectable speed
Sensitivity
Power input
Current draw
Alarm period
Warm-up period
Alarm output
Trouble output
LED indicator
RF interference
Operating temperature
Environment humidity
International protection
Mounting
Mounting height
Weight
Accessories
Passive infrared
Disable: During normal operation.
Enable: During WALK TEST or LED SW on.
Red: Warm-up, alarm, masking detection (VXI-RAM only)
-20 – +60°C (-4 – +140°F)
500 g (17.7 oz.)
9μA (standby) / 4 mA (max)
at 3 V DC
Passive infrared & Microwave
18μA (standby) / 8 mA (max)
at 3 V DC
Disable: During normal operation.
Enable: During WALK TEST or LED SW on.
Red: Warm-up, alarm, masking detection.
Yellow: Warm-up, MW detect.
-20 – +45°C (-4 – +113°F)
600 g (21.2 oz.)
12.0 m (40 ft) 90° wide / 16 zones
12 - 2.5 m (5 levels)
0.3 – 1.5 m/s (1 - 5 ft/s)
2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
9.5 – 18 V DC
24 mA (max) at 12 V DC
2.0 ±1 sec.
Approx. 60 sec. (LED blinks)
N.C. / N.O. Selectable 28 V DC 0.1 A (max)
N.C. 28 V DC 0.1 A (max) open when cover removed.
No alarm 10 V/m
95% max.
IP55
Wall, Pole (Outdoor, Indoor)
0.8 – 1.2 m (2.64 ft 3'94 ft)
Screw (4×20 mm) ×2 , Wiring sponge ×3 , Masking seal ×3
Passive infrared
Red: Warm-up, alarm,
masking detection (VXI-AM only)
-30 – +60°C (-22 – +140°F)
500 g (17.7 oz.)
N.C. 28 V DC 0.1 A (max)
20 mA (max) at 12 V DC
-
Model VXI-ST VXI-AM VXI-DAM
Unit:mm(inch)
The actual detection
distance is dependent
on the thermal conditions
within the given environment.
SIDE VIEW (Detection Distance by Positions)
Position 1 : Approx. 12m/40ft (Default)
0 5m 10m 12m
1m
Position 2 : Approx. 8.5m/27.9ft
0 5m 10m 12m
1m
Position 3 : Approx. 6.0m/19.7ft
0 5m 10m 12m
1m
Position 4 : Approx. 3.5m/11.5ft
0 5m 10m 12m
1m
Position 5 : Approx. 2.5m/8.2ft
0 5m 10m 12m
1m
TOP VIEW
(Area diagram for D position)
12m
10m
5m
12m 12m10m 10m5m 5m0
0
a
b
b
b
b
c
d
d
d
d
e
fg h i
j
k
k
k
k
l
m
m
m
m
n
b
d k
m
MW
PIR
D
ABC E FG
185.9
(7.32)
105.5(4.15 ) Pitch=83.5
(3.29)
DETECTION AREA DIMENSIONS
T E L :
Tech:
URL:
+1-909-993-5770
(800 )966-7839
http://www.optexamerica.com/
OPTEX INCORPORATED (USA)
T E L :
URL:
+55-11-2225-0934
http://www.optexdobrasil.com.br/
OPTEX DO BRASIL LTDA.
T E L :
URL:
+91-124-4035704
http://www.optex.net/in/
OPTEX PINNACLE INDIA PRIVATE LIMITED
T E L :
URL:
+82-2-719-5971
http://www.optexkorea.com/
OPTEX KOREA CO., LTD. (KOREA)
OPTEX (DONGGUAN) CO., LTD. SHANGHAI OFFICE (CHINA)
T E L :
URL:
+86-21-34600673
http://www.optexchina.com/
T E L :
URL:
+44-1628-631000
http://www.optex-europe.com/
OPTEX (EUROPE) LTD. (UK)
T E L :
URL:
+33-437-55-50-50
http://www.optex-security.com/
OPTEX SECURITY SAS (FRANCE)
T E L :
URL:
+48-22-598-06-55
http://www.optex.com.pl/
OPTEX SECURITY Sp.z o.o. (POLAND)
5-8-12 Ogoto Otsu Shiga 520-0101 JAPAN
T E L :
URL:
+81-77-579-8670
http://www.optex.co.jp/e/
OPTEX CO., LTD. (JAPAN)
No. 77040-00-15747-1306
Passive infrared & Microwave
35 mA (max) at 12 V DC
Red: Warm-up, alarm,
masking detection.
Yellow: Warm-up, MW detect.
-20 – +45°C (-4 – +113°F)
600 g (21.2 oz.)
VXI-T-Bracket BATTERY BOX (RBB-01)
*Battery not included.
Wall Tamper (WRS-04)
for R, RAM, RDAM models
Different values of EOL resistances can be instantly set by
plugging in optional modules. Please refer to the relevant
control panels manual to confirm matching resistance values.
Plug in EOL(End of line) Resistor Modules
CR123A x 3(3.0VDC)
CR2 x 3(3.0VDC)
1/2AA x 3(3.6VDC)
1/2AA x 6
(7.2VDC x 3)*
*3.6 VDC 1/2 AA battery in series.
Alarm: 2.2kΩ / Tamper: 4.7/ Trouble: 2.2kΩ
PEU-A(PACK)
Alarm: 4.7kΩ / Tamper: 4.7/ Trouble: 6.8kΩ
PEU-B(PACK)
Alarm: 1.0kΩ / Tamper: 1.0/ Trouble: 12kΩ
PEU-C(PACK)
Alarm: 1.0kΩ / Tamper: 1.0/ Trouble: 3.0kΩ
PEU-D(PACK)
Alarm: 1.1kΩ / Tamper: 1.1/ Trouble: 15
PEU-E(PACK)
Alarm: 5.6kΩ / Tamper: 5.6/ Trouble: 5.6kΩ
PEU-F(PACK)
series
VXI-ST
VXI-AM
VXI-DAM
WIRED MODEL
: 12m wide 2PIRs standard
: Anti-masking
: 2PIRs with Microwave
BATTERY OPERATED MODEL
VXI-R
VXI-RAM
VXI-RDAM
: Battery operated 12m 2PIRs
: Battery operated Anti-masking
: Battery operated 2PIRs with Microwave
*VXI-DAM and
VXI-RDAM can
not be used
due to
microwave
interference.
OPTIONS
Without a back box (VXI-ST / AM / DAM)
181.9
(7.16)
64.5(2.54)
With a back box (VXI-R / RAM / RDAM)
70.9(2.80)
71.3(2.81)
for wired models
for ST, AM, DAM models
Wall Tamper (WRS-02)
*Not applicable for a use of a set of dual technology models (DAM & RDAM).
− Flexible Detection Patterns
− Expanded Features in a Down-sized Body
− Digitally Enhanced Reliability
Flexible Detection Patterns
PIR DETECTOR
Optional 180 degree arrangement.
To cover a wider field, optional T-Bracket
enables two VXI detectors join to form a
single detection zone.
PIR DETECTOR with ANTI-MASKING
Active IR Anti-masking detects
covering objects on lens surface
when monitoring of the detector
status is required.
PIR and MICROWAVE DETECTOR
with ANTI-MASKING
Integrated algorithm of both PIR and Microwave provides
the ultimate stability in detection performance. In a field
where strong sun hits the land or facing direct light beams
from traffic, DAM/RDAM offers higher false alarm immunity.
5 types of pre-cut masking seals included for area congurations
Optimal different detection pattern can be
configured by a quick application of an
assigned masking seal onto the VXI lens.
VXI-DAM (Wired model)
VXI-RDAM (Battery operated model)
VXI-AM (Wired model)
VXI-RAM (Battery operated model)
Other Basic Common Features ●Double Conductive Shielding
●Area Defining Masking Seals
VXI reduced its profile size and increased its aesthetic appeal to be
adapted at various installation sites.
Digital Double Layer Detection
Both an upper and a lower detection areas must simultaneously be
crossed to generate an alarm.
The detections are independently analyzed so that a misleading
coincidence of events can be filtered out. This technology virtually
eliminates detections of smaller animals in the premises.
Digitally Enhanced Reliability
Expanded Features in a Down-sized Body
Wireless Ready
Flexible Detection Area SettingTough Mod 2TM (for DAM and RDAM models)
No DetectionDetection
etc.
No Detection
All VXI models are equipped with a digitally enhanced signal
recognition logic called SMDA. SMDA improves immunity against
various noise factors such as climate changes and vegetation
sways. VXIs expands applicable fields and reliability beyond what
VX-402 was capable.
SMDA logic (Super Multidimensional Analysis)
No alarm when only the lower detection
area is blocked.
VXI-ST (Wired model)
VXI-R (Battery operated model)
mm (inch)
8 Horizontal Area
Positions
5 Levels of Detection
Distance Adjustment
OPTEX Tough ModTM Technology enables a
long-time sustainability of Dual-detection
technology. Gold-plated Tough Mod increases
durability of a detector to withstand hot and
humid climates. Now, Tough Mod 2
extends the capability of
Dual-detection to battery operated
detectors with energy saving
circuits.
VXI installation has become easier and versatile
with a new mounting plate. Secure the plate on a
wall and mount VXI.
Alternatively, use a metal band with less than
25mm (1inch) width to secure the VXI onto any
diameter of poles. Optional wall tamper modules
are applicable to either type of installations.
Versatile Mounting Plate
Images
PCB board
Material Ceramic
Gold-plated
Antenna
Material
VX Infinity series Comventional
Wireless Trigger Life Time* Reference
VXI
CR123
(3VDC 1300mAh) 6 years 4years
4 2years years
CR2
(3VDC 750mAh)
R, RAM
Approx
RDAM
Approx
Approx Approx
A wireless transmitter of your choice can be
accommodated in VXI-R/RAM/RDAM models.
These models consume minimum electrical
current* from a battery. Optional battery box
(RBB-01) can expand the battery
capacity to prolong an operation period.
Optional EOL(End of line) resistor
modules are available.
IP55 Protection
UV Resistant ASA Body
*WTLT is an approximation based on hypothetical condition operated
with settings; LED(OFF), AM(ON), Battery Saving Timer(120sec)
*As low as 9 micro amperage at a standby.
Infinity Housing
Anti UV
Protection
IP55
All models of VXI include a back box in
their packages. The back box is
designed to accommodate various
wireless transmitters or can be used as a
conduit or a spacer between a wall and
the detector. Use
of the back box
is optional for
wired installations.
Multipurpose Spacious
Back Box
Tough Mod.2TM
Tough Micro
Wave Unit
2
EOL Module Socket
Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )
a jihgfedcb nmlka jihgfedcb nmlk
Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )
aj
ih
g
fedcb nmlka j
ih
g
fedcb nmlk
Use for maski ng op tiona l area . Use for two wi ng are a setting .(A or G position )
1 2
aj
ih
g
fedcb nmlka j
ih
g
fedcb nmlk
REAL SIZE
VXI-ST/VXI-AM/VXI-DAM
without Back Box
Disarm Sabotaged Trouble out
Trouble
signal
Detection
Alarm when both upper and lower detection
area are blocked.
Glass epoxy
Tin-plated
35
(1.38)
130
(5.12)
30
(1.18)
CAUTION: T-Bracket cannot be used for a
combination of two microwave detectors;
DAM-DAM, DAM-RDAM, RDAM-RDAM.
Pre-cut masking seals are included in all
packages.
Building upon features inherited from the VX-40 series, VX Infinity presents infinite possibility
with the power of digital processing. VXI-ST/R demonstrates a long & stable performance in
typical outdoor environment.
●Cover Tamper
●Sensitivity Adjustment Switch
●Walk Test Mode LED
Re-defining the Standard: VX-Infinity has 6 models
to choose from,
including RDAM with innovative
low current microwave technology.


Produktspezifikationen

Marke: Optex
Kategorie: Bewegungsmelder
Modell: VXI-ST

Brauchst du Hilfe?

Wenn Sie Hilfe mit Optex VXI-ST benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewegungsmelder Optex

Bedienungsanleitung Bewegungsmelder

Neueste Bedienungsanleitung für -Kategorien-