Muse M-158 IPW Bedienungsanleitung

Muse Lautsprecher M-158 IPW

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Muse M-158 IPW (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
In standby mode, press (9/R13) or (10/R14) button, alarm type ALARM 1 ALARM 2
will ash on display. Press (11/R9) or (12/R10) button to select to wake up
by buzzer, iPod/iPhone/iPad, or radio. The icon “ ”/“ ”, “ ”/” ” or “ ”/ “
” will show on display accordingly.
- “ ” or “ ” : “Beep“ sound comes when the alarm time is (wake up by buzzer)
reached.
- “ ” or ” ” : Follow the procedure in “(wake up by iPod/iPone/iPad) PLAY
YOUR DOCKABLE iPod/iPhone/iPad”. The iPod/iPhone/iPad will start playing au-
tomatically when the alarm time is reached and the unit is off.
- “ ” or “ ” : Follow the procedure in “ (wake up by radio) LISTENING TO THE
RADIO” to select your desired radio station. The radio will turn on automatically when
the alarm time is reached and the unit is off.
Press (9/R13) or (10/R14) button again, the hour digit ashes ALARM 1 ALARM 2
on display. Press the (11/R9) or (12/R10) button to adjust the hour.
Press (9/R13) or (10/R14) button again, the minute digit ashes ALARM 1 ALARM 2
on display. Press the (11/R9) or (12/R10) button to adjust the minutes.
Press (9/R13) or (10/R14) to save the setting of alarm 1 or ALARM 1 ALARM 2
alarm 2. The display will resume to the current time.
This unit can be set for two different wake up times which you can choose to use inde-
pendently or simultaneously ALARM1, ALARM2 or both ALARM1 and ALARM 2.
Alarm 1 or Alarm 2 setting
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
button (STANDBY)
VOLUME+ / - buttons
EQ button (equalizer)
M button (memory/clock setting)
FUNCTION button
iPod/iPhone/iPad Socket
SNOOZE/DIMMER button
SLEEP Button
ALARM1/MEMO- button
ALARM2/MEMO+ button
TUNING/ button
TUNING/ button
button (play/pause)
LCD display
Remote sensor
Speakers
FM Wire Antenna
VIDEO OUT jack
AUX IN jack
DC input (AC adaptor jack)
Battery Backup Compartment
M-158 IP
GB - 1
User Manual
Docking for iPod/iPhone/iPad Clock Radio PLL
Please read the instruction carefully
before operating the unit.
English GB - 2
GB - 4
Main unit
Top View
BASIC OPERATION
Turn on the unit
The unit is in clock mode when it is plugged in, press STANDBY button (1/R1) to
turn on or turn off the unit.
Operating mode selection (FUNCTION)
Press button (5/R2) repeatedly to select iPod/iPhone/iPad, AUX or Radio FUNCTION
mode.
Sound volume
Press button (2/R12) to adjust sound level. There are a total of 32 volume lev-VOL +/-
els.
Press button (R3) to cut off the sound temporarily, press this button again to re-
sume the sound.
Equalizer
When listening to the radio, iPod/iPhone/iPad or other music source from AUX IN, press
the button (3) repeatedly to select different modes: CLASSIC, ROCK, POP, JAZZ, EQ
X-B (bass boost) or EQ off.
Display dimmer
In standby mode, press the button (7) repeatedly will change the SNOOZE/DIMMER
backlight brightness of the display. There are 3 levels: low, medium, and high.
Front View
Back View
5. Press button (5/R2) to complete time setting.M
NOTE: With clock display blinking, if no button is pressed within 8 seconds, it will return
to previous clock display.
SLEEP (Automatic turn off)
In sleep mode, the unit will turn off automatically after a specied time.
Note: Sleep time can only be set when the unit is turned ON.
You can select a duration in minutes before the unit turns off automatically. Press
SLEEP button (8/R15) repeatedly to select 90-80-70-60-50-40-30-20-10 or 00 minutes,
then release button (8/R15), “SLEEP” shows on display.SLEEP
NOTES:
- To turn off the unit before the SLEEP activates, press STANDBY button (1/R1), or
press button (8/R15) repeatedly until value is adjusted to “00”. It will return to SLEEP
normal display after 5 seconds, the sleep function will be cancelled and “SLEEP” icon
will not be displayed.
- If the playing time from your iPhone or other player is shorter than the selected sleep
time, the music will stop at the end of the playing time.
GB - 3 GB - 5
When you unpack your new iPod/iPhone/iPad clock-radio, make sure that you have
removed all the accessories and information papers:
- Docking Clock Radio PLL for iPod/iPhone/iPad
- Remote Control
- AC adaptor
- 6 pieces iPod/iPhone/iPad interchangeable adaptors
- 1 piece Dust Cover
- iPad table bracket
- User manual
UNPACKING YOUR UNIT
PRODUCT DESCRIPTION
Battery backup system
DC power: 2x1.5V, battery type AAA/R03/UM4(not provided) for clock and alarm time
backup system.
An alkaline type battery is recommended. For optimum performance, this battery should
be replaced every 6 months.
BACKUP SYSTEM: All clock settings will be kept in memory; however, the clock time
may require adjustment for exact accuracy. If the backup battery is not installed, the
display will show the clock ashing to indicate that you have to reset the time and the
alarm.
NOTE: When the battery backup is functioning, the display has no backlight.
Remote control
R1. STANDBY button
R2. button FUNCTION
R3. button (mute)
R4. button (play/pause)
R5. button (return to previous menu in MENU
iPhone/iPod mode)
R6. button (navigate menu in iPod/iPhone/iPad
mode)
R7. button (navigate menu in iPod/iPhone/iPad
mode)
R8. button (conrm a selection in iPod/ENTER
iPhone/iPad mode)
R9. button (fast backward)
R10. button (fast forward)
R11. button (memory/clock setting)M/Clock
R12. + / - buttons VOLUME
R13. - button (alarm 1)ALM.1/MEMO
R14. ALM.2/MEMO+ button (alarm 2)
R15. button SLEEP
R16. button (snooze)SNZ
- Remove the spacer tab before use
Remove the spacer tab when you use the remote control for
the rst time.
To remove the tab, pull it in the direction of the arrow in the il-
lustration as shown.
- Replacing battery for the remote control
1. Press the stopper and pull out the battery holder.
2. Install 1pc “CR2025” lithium battery according to the polarity diagram on the battery
compartment.
3. Insert the battery holder into the remote control.
TIME SETTING
Current time
When used for the rst time, or if the mains plug has been removed with no backup bat-
tery inside, the clock display will blink.
1. In Standby mode, Press the button (4/R11) on the unit, the clock blinks on the dis-M
play.
2. With clock display blinking, press button (5/R2) to select 12 or 24 hour FUNCTION
format.
3. Press the button (4/R11), the hour digits will ash, set the hour with (11/R9) or M
(12/R10) button.
4. Press the button (4/R11) to save the hour setting, the minute digits ash Set the M
minutes with (11/R9) or (12/R10) button.
ALARM SETTING
D1. - Alarm #1 wake to buzzer
- Alarm #2 wake to buzzer
- Alarm #1 wake to iPod/iPhone/iPad
- Alarm #2 wake to iPod/iPhone/iPad
- Alarm #1 wake to radio
- Alarm #2 wake to radio
D2. -iPod/iPhone/iPad mode playback
D3. - Radio mode
D4. - AUX IN mode
D5. Equalizer modes
D6. Volume
D7. - mute
D8. SNOOZE
D9. SLEEP
D10. Memory
D11.Time or radiofrequency display
D12. FM Stereo
D13. Radio frequency unit
D14. “PM”-12hr time mode display
POWER SUPPLY
Using the AC adaptor
This AC adaptor operates on AC100-240V~50/60Hz.
• The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~50/
60Hz and should only be connected to a mains supply within these parameters.
• Use the supplied AC adaptor only. Using any other AC adaptor could damage the unit.
Cautions:
- The included AC adaptor is for use with this unit only. Do not use it with other equip
ments.
- When the unit is not going to be used for long time, disconnect the AC adaptor from
the AC outlet.
- Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from
the wall outlet at once.
- When the AC adaptor is plugged in, the apparatus is not completely disconnected
from the main power source, even when the unit is turned off.
- AC adaptor is used as the disconnect device. It shall remain readily operable and
should not be obstructed during intended use. To disconnect the apparatus from sup
ply mains, completely disconnect the AC adaptor of the apparatus from the mains
socket outlet
To check the alarm settings
In standby mode, press (9/R13) or (10/R14) button. Time and ALARM 1 ALARM 2
alarm source of the corresponding alarm are displayed for 5 seconds.
1.
2.
3.
4.
iPod/iPhone/iPad not included
LCD DISPLAY
DS-2765B IB MUSE 001 REV0 GB.ind1 1 2011-6-29 14:26:05
IMPORTANT
The docking station in this system follows the Apple “Universal Dock” design. This sys-
tem can be tted to different iPod/iPhone/iPad model.
Play your iPod/iPhone/iPad on the main unit
1. Connect your iPod/iPhone/iPad to the socket of the unit.
2. Press the STANDBY button (1/R1) to turn on the unit.
3. Press the button (5/R2) repeatedly to select iPod/iPhone/iPad mode. The FUNTION
display indicates “iPhone”.
4. Press button (13/R4) to play or pause. Press and hold button (13/R4) for 5
seconds to enter the iPod/iPhone/iPad sleep mode.
5. Select the previous or next track by pressing (11/R9) or (12/R10) button,
press and hold (11/R9) or (12/R10) on the unit to review or fast forward.
6. Press buttons (2/R12) to adjust sound level.VOL + / -
* Buttons on remote conrol for iPod/iPhone/iPad playing
MENU button (R5): Press to: return to previous page of menu.
or button (R6 or R7): press to select a menu item.
ENTER button (R8): press to conrm a selection (open a folder or start playing a se-
lected track).
iPhone call pick up
1. When phone call coming in, the music from the docking iPhone will pause automati-
cally.
2. Incoming call ring comes out from the unit speaker.
3. You can take iPhone from the unit and pick up phone call.
4. After nish your call, connect back the iPhone to the socket, it will resume the play-
back of iPhone.
Charge your iPod/iPhone/iPad
While your iPod/iPhone/iPad is docked on the system, its battery recharges automati-
cally until fully charged.
GB - 9
• The apparatus should not be exposed to dripping or splashing.
• Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.
• Do not place objects lled with liquids, such as vases, on the apparatus.
• The rating plate is located on the bottom of unit.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not throw batteries in re!
• Battery shall not be exposed to excessive heat such as sunshine, re or the like.
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Under the inuence of electrical fast transient or/and electrostatic phenomenon, the
product may malfunction and require user to power reset.
Cleaning
Be sure to turn the unit off and disconnect the AC adaptor before maintaining the
unit.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it
checked by an authorized engineer.
If at any time in the future you should need to dispose of this product please
note that Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice.(Waste Electrical and Electronic Equipment Direc-
tive)
GB - 6
GB - 10
CONNECTIONS
AUXILIARY
This unit includes the jack (19) to allow you to connect external devices, such AUX IN
as MP3 player, and listen to the music of your external device through the speakers of
this unit.
1. Connect the external device to the jack (19) at the back of the unit. AUX IN
2. Press STANDBY button (1/R1) to turn on the unit.
3. Press button (5/R2) to select mode. The display indicates FUNCTION AUXILIARY
“AUX”
4. Start to play your auxiliary source.
5. Adjust the volume to desired level.
6. To stop playback, disconnect your external device from the jack.AUX IN
SPECIFICATIONS
GENERAL
Power source
Dimension
TUNER
Frequency range
AUDIO SECTION
Power Consumption
Speaker Impedance
SAFETY INSTRUCTION
ATTENTION: To reduce the risk of electric shock, do not remove the
cover or back. There are no user serviceable parts inside the unit.
Refer all servicing to qualied personnel.
The lightning ash with arrowhead symbol within the triangle is a warning sign
alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of im-
portant instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
GB - 7 GB - 8
GB - 11
LISTEN TO THE RADIO
Manual operation
1. Press STANDBY button (1/R1) to turn on the unit.
2. Press FUNCTION button (5/R2) to select the RADIO mode. The display indicates “FM”
3. Press (11/R9) or (12/R10) to tune to a desired station.
Automatic search operation
Press and hold (11/R9) or (12/R10) button for approx. 2 seconds to start
searching in the chosen direction. The automatic searching operation locates strong
stations. Press again to stop searching. A station with a weak signal can be tuned man-
ually.
Note: During the search operation the sound level will be muted automatically.
Made for iPod, iPhone and iPad
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic acces-
sory has been designed to connect specically to iPod, iPhone, or iPad, respectively,
and has been certied by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety and regula-
tory standards. Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other coun-
tries. iPad is a trademark of Apple Inc.
iPod/iPhone/iPad interchangeable adapter
This system includes 6 different adapters designed to allow you to securely connect
any “dockable” iPod/iPhone/iPad model to the docking station. Refer to the chart below
to select the proper adapter for your particular iPod/iPhone/iPad model and insert that
adapter into the docking station before connecting your iPod/iPhone/iPad.
NOTE: No adapter is provided for the 3G (third generation) iPod.
Please use that adapters that were included with these iPod/iPhone/iPad at time of pur-
chase. They will t properly into the docking station of this system.
We have also included one at adapter with no opening at all. This serves as a dust
cover that can be inserted in the docking station if no iPod/iPhone/iPad will be con-
nected to the system for an extended period of time.
LISTEN TO YOUR iPod/iPhone/iPad
Turning off Alarm
The alarm is programmed to run for 59 minutes and triggers progressively.
Once the alarm 1 or alarm 2 is activated, corresponding alarm indicator “ ” / “ ”,
“ ”/” ” or “ ” / “ ” will ash on display,
1. In wake up mode, to temporarily stop alarm, press the button (7/R16). The SNOOZE
alarm will resume to the previous playing mode after 9 minutes. “ ” / “ ”, “ ”/
” ” or “ ” / “ ” and “SNOOZE” are on display.
2. To stop the alarm for 24 hours, press button (1/R1), “ ” / “ ”, “ ”Standby
/” ” or “ ” / “ ” remains displayed. The alarm will trigger at the preset time one
day later.
3. To turn off the alarm permanently, in standby mode, press and hold (9/ALARM 1
R13) or (10/R14) until “ ” / “ ”, “ ”/” ” or “ ” / “ ” disappears.ALARM 2
NOTE:
- You can adjust the wake up sound level by VOLUME+/- button on wake to iPod/
iPhone/iPad or radio modes.
- But since this is a progressive alarm, the sound will be louder and louder. You could
decrease the volume after the alarm reaches to its max volume level (24).
Program preset stations
This unit is able to store 20 FM radio stations in memory.
1. Select a radio station either manually or by automatic search.
2. Press button (4/R11) once, “MEMO” will ash and “01” will appear on display. M
3. Press button (9/10) to select a preset channel. MEMO- / +
4. Press button (4/R11) again to save the radio station in the selected preset channel. M
5. Repeat steps 1-4 to store other stations.
When you memorize a station on a preset, the previous station is erased and replaced
by the new one.
Listening to the preset stations
Press (9/R13) or (10/R14) button directly to select a preset station. MEMO- MEMO+
NOTE: For a better reception in FM, extend the antenna. If a stereo broadcast is re-
ceived, is displayed. “((ST))”
VIDEO
You can view the video from the iPod/iPhone/iPd on a TV by connecting it to your unit
via the jack (18) at the back of unit. VIDEO OUT
Use the cable with yellow plug of an AV cable to connect the composite video output of
this unit to the video input of a TV/monitor.
AC 100-240V ~ 50/60Hz
DC 3V, 2x1.5V “AAA/R03/UM4” size batteries (not included) or
equivalent for memory backup
359(W) x 130 (H)x 130(D) mm
FM: 87.5 - 108 MHz
2X3.5W
8 ohms
IMPORTANT SAFETY INSTRUCTIONS
• Never use an AC adaptor that is damaged, route power lead in a safe manner and
make sure it is not subjected to trapping or pinching. If the power lead is damaged refer
to a qualied service agent.
• Place the unit on a at and even surface.
• Do not restrict the air ow of the unit by placing it in a place with poor air ow, by cov-
ering it with a cloth, or by placing it on carpeting.
• To avoid magnetized, do not place the unit near speaker or magnet.
• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht,
etc) where it would be exposed to high temperatures above 40°C.
• It also should not be placed in temperatures less than 5°C or greater than 35°C.
*Do not use the unit immediately after transportation from a cold place to a warm place,
condensation problem may result.
• The ventilation should not be impeded by covering the ventilation openings with items
such as newspapers, table-cloths, curtains, etc.
• No naked ame sources, such as lighted candles, should be placed on the apparatus.
• The use of apparatus in moderate climates.
MAINTENANCE
iPod/iPhone/iPad Model
15
15
19
15
19
4
iPad
iPad
iPod/iPhone/iPad Model
DS-2765B IB MUSE 001 REV0 GB.ind2 2 2011-6-29 14:26:15

Produktspezifikationen

Marke: Muse
Kategorie: Lautsprecher
Modell: M-158 IPW

Brauchst du Hilfe?

Wenn Sie Hilfe mit Muse M-158 IPW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Muse

Muse

Muse M-1928 DJ Bedienungsanleitung

11 Oktober 2024
Muse

Muse M-1982 DJ Bedienungsanleitung

11 Oktober 2024
Muse

Muse M-1990 DJ Bedienungsanleitung

22 September 2024
Muse

Muse M-1080 Bedienungsanleitung

18 September 2024
Muse

Muse M-360 BR Bedienungsanleitung

6 September 2024
Muse

Muse M-530 KA Bedienungsanleitung

6 September 2024
Muse

Muse M-980 CA Bedienungsanleitung

6 September 2024
Muse

Muse M-360 BTB Bedienungsanleitung

6 September 2024
Muse

Muse M-790 BT Bedienungsanleitung

6 September 2024
Muse

Muse M-780 BTB Bedienungsanleitung

28 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024