Miiego MOOVE45i Bedienungsanleitung

Miiego Kopfhörer MOOVE45i

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Miiego MOOVE45i (20 Seiten) in der Kategorie Kopfhörer. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
Quick Start Guide
ENG
DK
NOR
SE
1 - 2
3 - 4
5 - 6
7 - 8
FR -
10
9
EST 31 41-
NL 11 21-
DE
1
15 17-
MOOVE i PRO45
SPECIFICATIONS
BT v5.3. Rechargeable 400 mA/h Li-ion battery.
Full charging time: around 2-3 hours.
Frequency range: 2.402-2.480GHz.
Freq. Response: 20Hz-20KHz.
CARE, MAINTENANCE, SAFETY
WARNING: Do not use while driving or where vehicular traffic is present, or in any
other activity where failure to hear your surroundings could be dangerous. Use of
these headphones at excessive volumes may cause permanent hearing damage.
Always turn the volume down before use. Keep out of reach from children and
animals. Avoid direct sunlight. Product storage and working temperatures: from
-5 degrees to +40 degrees. Do not dispose the battery in fire, as it may cause an
explosion. Any modifications to the device will void the user warranty and may
have consequences for your safety.
Pairing Your MOOVE 45i PRO by MIIEGO® Wireless Headphones
1: Make sure your are charged and turned OFFMOOVE 45i PROs
2: Press and hold the M- button on the headphones for 3 seconds until the indicator
light flashes Red and Blue alternatively (pairing mode).
3: Activate BT on your phone or other device and search for BT devices and select
MOOVE 45i PRO by MIIEGO® .
1
1
2
3
LED ca indi tor for cha ging r / pairing
Volume Up / N tex Song
Press once / Hold
M n-butto
Tu n r on headphones / off. Play / pause.
Answer call, end / reject call. Siri
Vol Dowume n / o Previ us Song
Press once / Hold
C r rtha ging po
B Mi o ui -in lt croph ne
ANC no eis cancelling / Low latency
button.
LED ca indi tor for AN C (Green=On)
1
2
3
6
7
8
4
5
6
7
8
5
4
ABOUT ANC – Active Noise Cancelling
The Active Noise Cancelling (ANC) function will reduce unwanted environmental
noise and deliver a clearer audio performance.
Please note:
ANC is mainly used for low frequency band noise. Even though environmental
noise is reduced, it may not be entirely eliminated and voice etc. can be heard.
Smartphones may cause interference/noise. If so, move the phone away ANC
from the headphones.
Do not press the headphones or ear cushions, when is on, as this may ANC
interfere the ANC microphone and cause high 'beep' noise.
When is ON it will consume more battery.ANC
ENG
2
This device contains a lithium accumulator.
Improper use can cause overheating and fire. Only listen to music in a moderate volume and
in moderate periods of time. Excessive exposure
to high sound levels can lead to noise-induced
hearing loss.
For California Residents: WARNING: This product contains
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
Charging Your MIIEGO Headphones
When the Red light is on, the headphones are charging.
When the Red light is off, the headphones are fully charged.
Full charging time is around 2-3 hours.
Next time charging
When you hear a warning tone of "battery low" every 180 seconds and the Red light
blinks, the battery status is low and needs charging.
Turning Your MIIEGO Headphones On and Off
ON: Press the M-Button for 3 seconds until the indicator light turns Blue.
OFF: Press the M-Button until the indicator light turns Red for 2 seconds.
Battery status with voice prompt when headphones are turned on
Battery high: 71-100%
Battery medium: 30-70%
Battery low: 0-29%
How to activate the ANC - Active Noise Cancelling function
Press Button 7 to activate Noise Cancelling On and Off
When ANC is ON the green indicator light is ON.
How to activate the Low Latency function
Double-press Button 7 to activate Low Latency On and Off.
When Low Latency is activated, you will hear a tone.
Soft reset
Make sure you delete ” from your phones BT-device settings before MOOVE 45i PRO
resetting.
1. When power is off, press and hold the M-button for 5 seconds until the light flashes
blue and red.
2. Press and hold both +/- buttons simultaneously for 10 seconds until you see the red
light flashing 3 times. The headphones will then power OFF automatically.
Multi-point connection (pair 2 devices):
1. Connect your FIRST device as normal. Then, turn off Bluetooth in settings on that
device. The headphones will then automatically enter pairing mode again.
2. Connect your SECOND device as normal to the headphones.
3. Then activate your FIRST device again and turn on Bluetooth. Re-connect/pair the
headphones to that device again.
Activate Siri on iOS-device:
Access Siri by pressing the M-button 2 times.
ENG


Produktspezifikationen

Marke: Miiego
Kategorie: Kopfhörer
Modell: MOOVE45i

Brauchst du Hilfe?

Wenn Sie Hilfe mit Miiego MOOVE45i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kopfhörer Miiego

Bedienungsanleitung Kopfhörer

Neueste Bedienungsanleitung für -Kategorien-