Metra AXM50-GM1 Bedienungsanleitung

Metra Kfz-Bausatz AXM50-GM1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra AXM50-GM1 (8 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
AXM50-GM1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/22/22 INSTAXM50-GM1
ATTENTION: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product.
Ensure that all installation connections,
especially the air bag indicator lights, are
plugged in before reconnecting the battery
or cycling the ignition to test this product.
NOTE: Refer also to the instructions
included with the aftermarket accessory
before installing this device.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Zip ties • Cutters (for zip ties)
TABLE OF CONTENTS
Connections ............................................................2
GM MOST50 Amp Retention Interface
2014-2021
APPLICATIONS
Add-on amp interface to be used with Axxess interface AXGMLN-09
Retains the Bose amp in GM vehicles
Retains balance
Micro-B USB updatable
Cadillac
Escalade 2015-2019
Chevrolet
Cheyenne 2014-2019
Colorado 2015-2018
Equinox (RPO IO5/IO6) 2018
Chevrolet cont.
Silverado 2014-2018
Spark 2016-2017
Suburban 2015-2021
Tahoe 2015-2020
Traverse (RPO Code IO5 / IO6) 2018
GMC
Acadia (RPO IO5/IO6) 2017-2019
Canyon (RPO IO5 / IO6) 2015-2018
Sierra 2016-2018
Sierra 1500 2014-2015
Sierra 2500/3500 2015-2018
Yukon 2015-2020
• AXM50-GM1 interface
• AXM50-GM1 T-harness
Product Info
Visit AxxessInterfaces.com for more detailed information
about the product and up-to-date vehicle specific applications
2
CONNECTIONS
4-PIN MIC HDMI
CONNECT TO RADIO
To AXGMLN-09
Harness
LD-JUMP 10 PIN LD-JUMP 12 PIN
Overall Gain
Potentiometer
RADIO
Plug into the Connector you
unplugged from the CD Player.
Cut RCA’s and wire
to speaker level
if you have low sound.
22 Pin
8 Pin
8 Pin 10 Pin
LED
INITIALIZATION STEPS
1. After all connections are
made, turn on the ignition
2. LEDLook at the on the
AXM50-GM1 and wait for the
LED to go solid RED
3. LED Once is solid RED, cycle
ignition and test
Rear View
RCAs
Connect to the 8 PIN MOST
connector at tuner
To AXGMLN-09
Interface
From the 10-pin or 12-pin jumper harness to the vehicle:
If the vehicle
does not
have a CD or DVD-Drive, disregard these steps.
For models
without
rear seat entertainment:
Connect the female Black 10-pin jumper harness, to the male
Black 10-pin harness removed from the CD-Drive.
For models
with
rear seat entertainment:
Connect the female Black 12-pin jumper harness, to the male
Black 12-pin harness removed from the DVD-Drive.
Note: Even though this step must be done for models with rear
seat entertainment, the rear seat entertainment system will not be
retained by this interface.
3
REV. 12/22/22 INSTAXM50-GM1


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: AXM50-GM1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra AXM50-GM1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-