Metra 99-7875 Bedienungsanleitung

Metra Kfz-Bausatz 99-7875

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7875 (12 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
INSTALLATION INSTRUCTIONS FOR PART 99-7875/99-7875T
99-7875/99-7875T
APPLICATIONS
Honda Accord 2008-up
(For Non-Navigation models with Dual Zone Climate controls)
Honda Accord Crosstour 2010-up
KIT FEATURES
• Painted To Match Factory Dash
99-7875=Charcoal, 99-7875T=Taupe
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
1-800-221-0932
© COPYRIGHT 2008-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
Small Flat Blade Screwdriver • Panel Removal Tool
Phillips Screwdriver • Cutting Tool
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1729 - Honda harness 2008-up
• 70-1730 - Honda amp interface harness 2008-up
Antenna Adapter:
• 40-HD10 - Honda antenna adapter 2005-up
TOOLS REQUIRED:
D E
F
CBA
Dash Disassembly
Honda Accord 2008-up / Crosstour 2010-up
(With dual zone automatic climate controls)
. . . . . . . . . . . . . . . . . . . . .1,2
Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Kit Assembly
- DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 4
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5
- Double DIN /Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . 6
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TABLE OF CONTENTS
99-7875/99-7875T
*Note:
Refer also to the instructions included with the aftermarket radio.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
towa a better tomorrord w.
Metra recommends MECP
certified technicians
99-7875/99-7875T DASH DISASSEMBLY
HONDA ACCORD 2008-UP/CROSSTOUR 2010-UP
1
1
Unclip and remove the trim panel at
the left side of the factory radio.
(
Figure B)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
Unclip and remove the trim panel
from above the glove box at the right
side of the factory radio. (
Figure A)
2
Unclip and remove the top of the cen-
ter console including the cup holders.
(
Figure D)
5
Remove (2) Phillips screws at the
bottom edge of the pocket assembly.
(
Figure E)
6
Remove the (2) Phillips screws from
the left and right side of the of the
factory radio. (
Figure C)
4
Continue on page 2.
D
B
C
A
E
7
Remove (2) Phillips screws facing up
inside of the pocket below the factory
radio. (
Figure F)
Unclip and remove the pocket assem-
bly. (
Figure G)
8


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-7875

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7875 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Metra

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-