Metra 99-5832G Bedienungsanleitung
Metra
Kfz-Bausatz
99-5832G
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-5832G (4 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
REV. 4/20/2016 INST99-5832G
INSTALLATION INSTRUCTIONS FOR PART 99-5832G
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Radio trim panel is painted gray
• A) Radio trim panel • B) Dash panel • C) Radio brackets • D) Pocket • E) Airbag light blank
• F) (4) #8 x 3/8” Phillips truss head screws • G) (2) #8 x 3/8” Phillips pan head screws • H) (3) Metal “U” panel clips
• I) (5) Metal “D” panel clips • J) (4) Small metal “D” panel clips • K) (4) Plastic panel clips
KIT FEATURES
KIT COMPONENTS
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx screwdriver
TOOLS REQUIRED
(without 4.2” screen)
A
Table of Contents
B DC
F G H I J K
E
Dash Disassembly ..................................................2
Kit Preparation ........................................................2
Kit Assembly
– 3 ISO DIN radio provision with pocket .......................
– 3 ISO DDIN radio provision .......................................
Final Assembly .......................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-5524 Antenna adapter: • 40-EU10
99-5832G
1. Unclip the dash panel above the
radio. (Figure A)
2. Remove (2) T-20 Torx screws
securing the factory radio/trim
panel. (Figure B)
3. Unclip the factory radio/trim panel
from the dash, unplug and remove.
(Figure B)
4. Remove (1) T-20 Torx screw per
vent then unclip and remove the
vents from the factory radio/trim
panel. (Figure C)
5. Unclip and remove the hazard
switch assembly from the factory
radio/trim panel. (Figure D)
Continue to kit preparation
Dash Disassembly Kit Preparation
1. Secure the factory vents to the radio
trim panel using the (2) #8 x 3/8”
Phillips pan head screws provided.
(Figure A)
2. Snap the factory hazard button into the
radio trim panel. An airbag light blank
has been included for models without a
passenger airbag indicator. (Figure A)
(Figure B)
(Figure A) (Figure D) (Figure B) (Figure C)
(Figure C) (Figure A)
3. Attach the (4) plastic panel clips
provided, to the radio trim panel.
(Figure B)
4. Attach the (12) metal panel clips
provided, to the . (Figure C)dash panel
Continue to kit assembly
99-5832G
Kit Assembly Final Assembly
ISO DIN radio provision with pocket
1. Attach the pocket radio to the
brackets using the (4) supplied
#8 x 3/8” Phillips truss head screws.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly and then secure it using
the screws supplied with the radio.
(Figure B)
Continue to final assembly
ISO DDIN radio provision
1. Attach the to the radio brackets
radio using screws supplied with
the radio. (Figure C)
Continue to final assembly
(Figure A)
(Figure C) (Figure A)
(Figure B)
1. Cut the shaded portion from the
sub-dash of the vehicle to allow
the radio to fit. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
3. Secure the radio into the dash.
4. Snap the over radio trim panel
the radio and then reassemble
the dash in reverse order of
disassembly.
Remove shaded area
Produktspezifikationen
| Marke: | Metra |
| Kategorie: | Kfz-Bausatz |
| Modell: | 99-5832G |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra 99-5832G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kfz-Bausatz Metra
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
Bedienungsanleitung Kfz-Bausatz
- Kfz-Bausatz BeeWi
- Kfz-Bausatz Belkin
- Kfz-Bausatz Exibel
- Kfz-Bausatz Gembird
- Kfz-Bausatz Hama
- Kfz-Bausatz Medion
- Kfz-Bausatz Nedis
- Kfz-Bausatz SilverCrest
- Kfz-Bausatz T'nB
- Kfz-Bausatz Siemens
- Kfz-Bausatz Thule
- Kfz-Bausatz Dymond
- Kfz-Bausatz Technaxx
- Kfz-Bausatz Renkforce
- Kfz-Bausatz Blaupunkt
- Kfz-Bausatz Kenwood
- Kfz-Bausatz Pyle
- Kfz-Bausatz B-Speech
- Kfz-Bausatz Caliber
- Kfz-Bausatz Pioneer
- Kfz-Bausatz Jabra
- Kfz-Bausatz JVC
- Kfz-Bausatz Motorola
- Kfz-Bausatz Nokia
- Kfz-Bausatz MT Logic
- Kfz-Bausatz Livoo
- Kfz-Bausatz Sony Ericsson
- Kfz-Bausatz Scosche
- Kfz-Bausatz SuperTooth
- Kfz-Bausatz SBS
- Kfz-Bausatz Parrot
- Kfz-Bausatz EnVivo
- Kfz-Bausatz Alpine
- Kfz-Bausatz Uniden
- Kfz-Bausatz Clarion
- Kfz-Bausatz Kogan
- Kfz-Bausatz TomTom
- Kfz-Bausatz HQ
- Kfz-Bausatz Cobra
- Kfz-Bausatz Ergotron
- Kfz-Bausatz I-Tec
- Kfz-Bausatz BURY
- Kfz-Bausatz Mr Handsfree
- Kfz-Bausatz Cellular Line
- Kfz-Bausatz BlueAnt
- Kfz-Bausatz Iluv
- Kfz-Bausatz Veho
- Kfz-Bausatz PAC
- Kfz-Bausatz Konig & Meyer
- Kfz-Bausatz KRAM
- Kfz-Bausatz Brigmton
- Kfz-Bausatz Havis
- Kfz-Bausatz Hamron
- Kfz-Bausatz SiriusXM
- Kfz-Bausatz Novus
- Kfz-Bausatz Perfect Choice
- Kfz-Bausatz Alpin
- Kfz-Bausatz Foliatec
- Kfz-Bausatz THB
- Kfz-Bausatz Arkon
- Kfz-Bausatz Brodit
Neueste Bedienungsanleitung für -Kategorien-
29 September 2024
22 September 2024
21 September 2024
19 September 2024
18 September 2024
18 September 2024
17 September 2024
14 September 2024
14 September 2024
9 September 2024